Agitator Drives (Reactor Parts)

1.00HP 920RPM CHEMINEER

Stock #L1150-11

1.00HP 920RPM CHEMINEER

Stock #L1150-11

Unused Chemineer agitator drive. Direct driven by 0.75 kW 3/50 920 rpm motor through a gearbox. Agitator shaft approximately 55mm diameter X 250mm long.

Location: Perry England Warehouse

Add to Cart View Details

1.00HP 920RPM CHEMINEER MODEL 1-GTNC-1

Stock #L1150-03

1.00HP 920RPM CHEMINEER MODEL 1-GTNC-1

Stock #L1150-03

Unused Chemineer model 1-GTNC-1 agitator drive. Direct driven by 0.75 kW 3/50 920 rpm motor through a gearbox. Agitator shaft approximately 55mm diameter X 250mm long.

Location: Perry England Warehouse

Add to Cart View Details

2.01HP 1420RPM

Stock #L1194-34

2.01HP 1420RPM

Stock #L1194-34

Used 2-tier 4-blade pitched paddle and Sawtooth type agitator driven by a 1.5 kW, 220-415 volt, 1420 rpm motor.

Location: Perry England Warehouse

Add to Cart View Details

.3 HP 400RPM PROPELLER SS FLANGE MOUNTED

Stock #200-70CAG

.3 HP 400RPM PROPELLER SS FLANGE MOUNTED

Stock #200-70CAG

Used 1/3 HP 400 rpm propeller agitator. Stainless steel. 1″ diameter X 70″ long shaft. 3-blade propeller approximately 14″ diameter. Flange mounted.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

.3 HP 1725RPM LIGHTNIN ND-1 CLAMP-ON

Stock #653-60357

.3 HP 1725RPM LIGHTNIN ND-1 CLAMP-ON

Stock #653-60357

Used Lightnin model ND-1 clamp-on agitator. 5/8″ diameter X 50″ long 304 stainless steel shaft with 9″ diameter 316 stainless steel 3-blade propeller. Driven by 1/3 HP, 1 phase, 60 cycle, 115 volt, 1725 rpm motor.

Location: Midwest USA

Add to Cart View Details

.5 HP 1725RPM LIGHTNIN INLINE MXR SS 1LBC50

Stock #064-08

.5 HP 1725RPM LIGHTNIN INLINE MXR SS 1LBC50

Stock #064-08

Used Lightnin inline 316 electric stainless steel mixer, model 1LBC50. 1/2 HP 3 phase 60 cycle 480/1725 volt rpm TEFC. With stuffing box. 2″ D. Impeller. 50 psi line pressure.

Location: Midwest USA

Add to Cart View Details

.75HP LIGHTNIN CLAMP

Stock #15999-203

.75HP LIGHTNIN CLAMP

Stock #15999-203

Used Lightnin 3/4 HP clamp on agitator. Electrics are 3/60-50/208- 220-440V. Serial #517544.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

.75HP LIGHTNIN CLAMP ON

Stock #M3890-030

.75HP LIGHTNIN CLAMP ON

Stock #M3890-030

Used Lightnin’ clamp on agitator approximately 3/4 HP. 1/2″ diameter shaft X 2′ long shaft. No propeller.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

.75HP LIGHTNIN VERT MOUNT

Stock #7985V

.75HP LIGHTNIN VERT MOUNT

Stock #7985V

Used Lightnin Vaktor .75 HP vertical mount agitator. 3/60/203-230-450 volt, 1725 rpm motor. 1″ diameter X 8′ long stainless steel shaft with 12″ propeller.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

0.50HP 510RPM TURBINE AGIT

Stock #U2101-22

0.50HP 510RPM TURBINE AGIT

Stock #U2101-22

Used turbine agitator with motor and gearbox. Driven via variable gearbox Brown Pestel and eletric motor 0,37 kW, 3/50 HZ, 1380 rpm. Plastic turbine agitator has range of rotation speed from 37 up to 510 rpm. Diameter agitator 140 mm....

Location: Perry Poland Warehouse

Add to Cart View Details

0.75HP 2790RPM TURBO-MULLER

Stock #U2149-14

0.75HP 2790RPM TURBO-MULLER

Stock #U2149-14

Used Turbo-Müller mini agitator mounted on support. Stainless steel contact parts. Directly driven by electric motor (0,55 kW, 220 V, 3 PH, 50 HZ, 2790 rpm). Shaft length 400 mm, support height 1100 mm. Mixing head missing.

Location: Perry Poland Warehouse

Add to Cart View Details

2 HP 1160RPM LIGHTNIN FLANGE MOUNTED

Stock #M3441-013

2 HP 1160RPM LIGHTNIN FLANGE MOUNTED

Stock #M3441-013

Used Lightnin model 200=LD-200-200 vertical flange mounted agitator. 2 HP 3/60/220/440 volt 1160 rpm motor. Requires prop and shaft.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2 HP 1750RPM LIGHTNIN FLANGE MOUNTED.

Stock #M3677-003

2 HP 1750RPM LIGHTNIN FLANGE MOUNTED.

Stock #M3677-003

Used Lightnin flanged mounted agitator, 12″ flange, 2 HP 3/60/220/440 volt 1750 rpm Allis Chalmers motor. 12″ stainless steel shaft with 6″ stainless steel flange.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

150 HP 155RPM LIGHTNIN

Stock #574-31

150 HP 155RPM LIGHTNIN

Stock #574-31

Used 150 HP Lightnin model 88-C-150 agitator drive. 155/77 rpm, 11:5 gearbox ratio, 460 volt. Stainless steel stub shaft.

Location: Midwest USA

Add to Cart View Details

1.00HP 84RPM LIGHTNIN SERIES 10 1998

Stock #448-15

1.00HP 84RPM LIGHTNIN SERIES 10 1998

Stock #448-15

Used Lightnin model 14S1 vertical mount agitator. 1 HP giving 84 rpm output speed. Built 1998. Serial #W9841223500501. 8″ flange mounted. Series 10. Newer design.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.00HP 775RPM TURBINE AGIT

Stock #U2101-23

1.00HP 775RPM TURBINE AGIT

Stock #U2101-23

Used turbine agitator with motor and gearbox. Driven via variable gearbox HTRIEB and eletric motor 0,75 kW, 50 HZ, 1400 rpm. Plastic turbine agitator has range of rotation speed from 155 up to 775 rpm. Diameter agitator 150 mm. Shaft...

Location: Perry Poland Warehouse

Add to Cart View Details

1.00HP LIGHTNIN SS 3 BLADE

Stock #419-53

1.00HP LIGHTNIN SS 3 BLADE

Stock #419-53

Used Lightnin agitator drive series 10, equipped with 1 HP motor and gearbox, flange mounted, has 8′ long stainless steel shaft with (1) 3-paddle stainless steel blade.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.00HP LIGHTNIN SS 3 BLADE

Stock #419-52

1.00HP LIGHTNIN SS 3 BLADE

Stock #419-52

Used Lightnin agitator drive series 10, equipped with 1 HP motor and gearbox, flange mounted, has 8′ long stainless steel shaft with (1) 3-paddle stainless steel blade.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.5 HP 100RPM CHEMINEER T316 SS

Stock #336-101AG

1.5 HP 100RPM CHEMINEER T316 SS

Stock #336-101AG

Used 2-tier 4-blade pitched impellor agitator. 16″ span. Approx. 6′ long shaft. T316 stainless steel construction. Driven by Chemineer model 1HTM-15, 1.5 HP drive. Rated 100 rpm output.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.50HP RPM CLAMP ON W/SS PROPELLOR

Stock #4684-1SA

1.50HP RPM CLAMP ON W/SS PROPELLOR

Stock #4684-1SA

Used Cleveland mfr. Co.. Clamp on agitator and drive. 10″ DIA. 3-blade propellor agitator, 64″ long shaft, stainless steel. 1.5 HP 230-460 volt gearhead drive.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

1.7 HP DC LIGHTNIN XJ10 3-BLADE IMP

Stock #5548-10

1.7 HP DC LIGHTNIN XJ10 3-BLADE IMP

Stock #5548-10

Used Lightnin model XJ10-174SCR agitator drive, with 1.74 HP DC motor. With 3-blade 14″ span pitched impellor agitator, on 1 1/2″ DIA. X 26″ long shaft, stainless steel. Flange mounted on 40″ long 24″ wide angle iron bridge mount. Lightnin...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

10.00HP 1740PRM LIGHTNIN ALLIS CHALMERS MTR.

Stock #M2325-002

10.00HP 1740PRM LIGHTNIN ALLIS CHALMERS MTR.

Stock #M2325-002

Used Lightnin agitator drive. Model 524TEC102 10 HP Allis Chalmers motor 3/60/220-440 volt. 1740 rpm. Output rpm 56, reducer ratio 31.4-1. 3″ stub shaft. 20″ mounting flange. S/N 559013.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP LIGHTNIN 73S15 DRIVE

Stock #325-12DR

15.00HP LIGHTNIN 73S15 DRIVE

Stock #325-12DR

Used 15 HP Lightnin drive. Model 73S15, S/N 77180SS, 16.8:1 ratio, 126 out rpm. Motor 15 HP 3/60/230-460V exp.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP LIGHTNING

Stock #325-11DR

15.00HP LIGHTNING

Stock #325-11DR

15 HP 73S10 Lightning drive with glass lined agitator for a 1,500 gallon. Model 73S15, S/N 77180SS, 16.8:1 gear ratio 126 rpm output speed. 3/60/230-460 volt.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP RPM BRIDGE MOUNTED, +25:1

Stock #315-202

15.00HP RPM BRIDGE MOUNTED, +25:1

Stock #315-202

Used bridge mounted 15 HP agitator drive. Foote Bros. Vertical in-line reducer, belt driven by 15 HP 3/60/460 volt motor, shaft mounting flange for a 4″ DIA. Shaft. Steel angle iron bridge mount, 2′ wide X 7′ long.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP RPM BRIDGE MOUNTED, +25:1

Stock #315-209

15.00HP RPM BRIDGE MOUNTED, +25:1

Stock #315-209

Used bridge mounted 15 HP agitator drive. Foote Bros. Vertical inline reducer, belt driven by 15 HP 3/60/460 volt motor, shaft mounting flange for a 4″ DIA. Shaft. Steel angle iron bridge mount, 2′ wide X 7′ long.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP 20RPM CHEMIN HELICAL RT ANGLE SS

Stock #3581-2AG

15.00HP 20RPM CHEMIN HELICAL RT ANGLE SS

Stock #3581-2AG

Used Chemineer right angle 2 speed drive. Model MAB-150-886 driven by 15 HP motor 3/60/440/1800/900 rpm. Output speed 20 and 10 rpm. Stuffing box. Agitator consists of 4 1/2″ DIA. X 84″ high stainless steel shaft and helical blades. Type...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP 113RPM PHILA LESS SHAFT & BLADE

Stock #111-1016AG

15.00HP 113RPM PHILA LESS SHAFT & BLADE

Stock #111-1016AG

Used Philadelphia right angle agitator drive. 113 rpm output with 15 HP motor 3 phase 60 cycle 440 volt. No shaft or blade.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

15.00HP 118RPM PHILA PTE-08

Stock #15999-313

15.00HP 118RPM PHILA PTE-08

Stock #15999-313

Reconditioned Philadelphia. Model PTE-08 agitator drive. Flange mounted design. 17.5:1 ratio, 1750 input rpm, 118 output rpm. Service factor 1.25. HP rating 18.56. Serial #303647. Cleaned and painted.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

150.00HP 120RPM CHEMINEER 9HTN-150

Stock #15999-230

150.00HP 120RPM CHEMINEER 9HTN-150

Stock #15999-230

Used Chemineer right angle agitator drive. Model 9HTN-150. Rated 120 rpm output, 1750 rpm input. 12″ DIA. Hub.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.7 HP 31 RPM PROPELLER/”BANANA BLADE” TYPE

Stock #U1941-2

2.7 HP 31 RPM PROPELLER/”BANANA BLADE” TYPE

Stock #U1941-2

Used propeller agitator with two blades (banana blade type). One blade has a length 1200mm and maximal width 400mm. Blades made of plastic. Driven by electric motor 2 kW/ 1395 rpm/380 volts. Connected by reducer with reduction rate I=45. Agitator...

Location: Perry Poland Warehouse

Add to Cart View Details

21.00HP 37RPM PHILA. PTER012

Stock #346-62

21.00HP 37RPM PHILA. PTER012

Stock #346-62

Used 21.2 HP Philadelphia mixer drive, type PTER0-12. 47.3:1 ratio. 1750/1150 input rpm, 37/25 output rpm. 1.25 service factor. S/N 301602.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

24.80HP 105RPM REEVES/RUBA

Stock #UG5920

24.80HP 105RPM REEVES/RUBA

Stock #UG5920

Used Reeves variable speed agitator drive. Has gearbox Ruba type 542-D-15. Range of rotation speed from 105 up to 560 rpm. Driven by electric motor 18.5 kW / 1475 rpm / 380V / 50 HZ .

Location: Poland

Add to Cart View Details

250.00HP 350RPM CHEMINEER MECH SEAL SS IMPELLER

Stock #SB085-14AG

250.00HP 350RPM CHEMINEER MECH SEAL SS IMPELLER

Stock #SB085-14AG

Used Chemineer agitator model 8RHTA-250 right angle down. Has 250 HP 3/60/2300V/1785 rpm motor. Output 350 rpm impeller. Mechanical seal. Was mounted on 1000 gallon vertical 304 stainless steel reactor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.00HP 106RPM PHILLY VERTICAL W/BRIDGE

Stock #276-068SA

3.00HP 106RPM PHILLY VERTICAL W/BRIDGE

Stock #276-068SA

Used 3 HP Philadelphia gear works vertical agitator drive. 16.5:1 gear ratio, 106 output rpm. 3 HP 1750 rpm 220/440 volt motor. Bridge mounted on 2′ wide X 9′ long steel frame. Philadelphia serial #333V2.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3.00HP 125RPM PHILA. MT-02-PTS

Stock #5119-30

3.00HP 125RPM PHILA. MT-02-PTS

Stock #5119-30

Used Philadelphia mixer Co.. Model mt-02-PTS right angle agitator drive. Rated 1750 rpm input, 14.0:1 gear ratio, 125 rpm output. 3 HP 1730 rpm 230/460 volt motor. Mfr. Serial #89BB00678.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5.00HP 30RPM FALK VER DRIVE

Stock #5093-8DR

5.00HP 30RPM FALK VER DRIVE

Stock #5093-8DR

Used Falk vertical agitator drive class 2, 30 output rpm. With 5 HP, 3 phase, 60 cycle, 220-440 volt, 1150 rpm. TEFC motor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

5.00HP 100RPM PHILA PTE 06

Stock #271-505

5.00HP 100RPM PHILA PTE 06

Stock #271-505

Used Philadelphia PTE-06 agitator drive. Rated 8.48 HP, 1.25 service factor, 1750 input rpm, 14.9:1 gear ratio, 100 rpm output. Serial #308360. Driven by a 5 HP 3/60/230-460 volt motor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

65.00HP 120RPM FOOTE BROS 1XL 10-HGV 7.5:1

Stock #014-02

65.00HP 120RPM FOOTE BROS 1XL 10-HGV 7.5:1

Stock #014-02

Used Foote Bros IXL type 10-HGV agitator drive, ratio 7.5:1 horizontal input shaft, right angle down drive output shaft. Rated 16 HP @ 210 rpm in – 28 out. 34 HP @ 450 rpm in – 60 out. 65 HP...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7.5 HP 100RPM PHILA. MT-02-PTS

Stock #5119-21AD

7.5 HP 100RPM PHILA. MT-02-PTS

Stock #5119-21AD

Used Philadelphia mixer Co.. Model mt-02-PTS right angle agitator drive. Rated 1750 rpm input, 17.0:1 gear ratio, 100 rpm output. 7.5 HP 1755 rpm 3/60/230-460V motor. S/N 89BBH0674.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7.5 HP 100RPM PHILA. PTERO-10

Stock #346-64

7.5 HP 100RPM PHILA. PTERO-10

Stock #346-64

Used 7.5 HP Philadelphia mixer drive. Type PTER0-10, 17.5:1 ratio. 1750/1150 input rpm, 100/65 output rpm. 1.25 service factor. 575 volt, S/N 303195.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7.50HP CHEMINEER 3-BLADE RETREAT CURVE

Stock #663-REX8303AGIT

7.50HP CHEMINEER 3-BLADE RETREAT CURVE

Stock #663-REX8303AGIT

Used 7.5 hp Chemineer drive with 3-blade retreat curve agitator and beaver tail baffle. (2) dip tubes. 12/125 rpm. Mechanical seal. Last used on 500 gallon glass lined Tycon.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7.50HP 45RPM LIGHTNIN MDL 327-RELB-7.52

Stock #276-080SA

7.50HP 45RPM LIGHTNIN MDL 327-RELB-7.52

Stock #276-080SA

Used Lightnin model 327-Relb-7.52 reducer, 7.5 HP induction motor, 3/60/220-440 volt, 1760 rpm, motor S/N 2435714. Lightnin reducer 45 rpm, 38:4 ratio, S/N 6512385. No agitator shaft or blades.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

7.50HP 100RPM FALK IN LINE REDUCER 11.53:1

Stock #109-200AG

7.50HP 100RPM FALK IN LINE REDUCER 11.53:1

Stock #109-200AG

Used 7 1/2 HP vertical agitator drive. Falk model 7.535EZ05a5, 11.53:1 reduction ratio, rated 100 rpm output. Direct coupled 7 1/2 HP, 3 phase, 60 cycle, 230-460 volt, 1150 rpm motor.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

75.00HP 30RPM LIGHTNIN MDL LAT-150 RIGHT ANGL

Stock #5760-22

75.00HP 30RPM LIGHTNIN MDL LAT-150 RIGHT ANGL

Stock #5760-22

Used Lightnin Co.. Model lat-150 agitator drive. 58.8:1 right angle reducer with 3/4 HP oil pump, rated 30 rpm output. Direct coupled 75 HP/35 HP 1780/1185 rpm 460 volt motor. 24″ high I-beam supports. Carbon steel agitator mounting shaft W/12...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

75.00HP 126RPM LIGHTNIN 515-REDS-75.1 220/440

Stock #070-128AG

75.00HP 126RPM LIGHTNIN 515-REDS-75.1 220/440

Stock #070-128AG

Used Lightnin model 515-reds-75.1 right angle agitator drive. Serial# 627520. Ratio 14.01, class 1 driven by 75 HP motor 1775 rpm 3/60/ 220/440, frame: 504U. 126 rpm output. No seal assembly.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

75.00HP 1800RPM HAYWARD GORDON HDM-210

Stock #V809-137

75.00HP 1800RPM HAYWARD GORDON HDM-210

Stock #V809-137

Unused Hayward Gordon agitator drive unit. With Hayward Gordon model HDM-210 gear reducer. Hayward Gordon 75 HP, 1800 rpm motor, Flowserve double BPO seal, and agitator.

Location: CANADA

Add to Cart View Details

75.00HP 30/20RPM LIGHTNIN MDL LAT-150

Stock #278-60

75.00HP 30/20RPM LIGHTNIN MDL LAT-150

Stock #278-60

Used 75 HP Lightnin agitator drive, model lat-150. 30/20 rpm output. 60.8:1 gear ratio. Designed for atmospheric conditions. With steel I-beams supports for bridge mount. Serial #7605890.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

BRAWN BDA1000C AGIT

Stock #682-77

BRAWN BDA1000C AGIT

Stock #682-77

Used Brawn model BDA1000C fixed mount, open tank design, air-operated agitator. Clockwise rotation. Stainless steel stub shaft mounting flange. Requires shaft and blade.

Location: Midwest USA

Add to Cart View Details

BRAWN BDA1000C AGIT

Stock #682-76

BRAWN BDA1000C AGIT

Stock #682-76

Used Brawn model BDA1000C fixed mount, open tank design, air-operated agitator. Clockwise rotation. Stainless steel stub shaft mounting flange. Requires shaft and blade.

Location: Midwest USA

Add to Cart View Details

LIGHTNIN 33 G 50 FLANGE MTD

Stock #271-025SA

LIGHTNIN 33 G 50 FLANGE MTD

Stock #271-025SA

Used Lightnin model 33 G 50 agitator. (2) 10″ diameter propellers on 1 1/4″ diameter X 68″ long stainless steel shaft. Flange mounted for 10″ id connection, with seal. With motor. Lightnin serial #541089.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

3′ Dia. X 8′ Straight Side, Lightnin Agitator

Stock #789-095AG

3′ Dia. X 8′ Straight Side, Lightnin Agitator

Stock #789-095AG

Top-entering Lightnin model 82-QS-5 agitator; ratio 11.5, output 152 rpm. Approximately 2.5″ diameter X 154″ long shaft with bottom supported 3-tier, 4-blade disc turbines. Driven by 5 HP, 3 phase, 60 cycle, 230/460 volt, 1750 rpm motor with 11.5:1 ratio....

Location: Midwest USA

Add to Cart View Details

LIGHTNIN CLAMP-ON

Stock #653-60360

LIGHTNIN CLAMP-ON

Stock #653-60360

Used Lightnin model EV1P25a clamp-on air-operated agitator. 5/8″ diameter X 38.5″ long 304 stainless steel shaft with 3″ diameter 316 stainless steel 3-blade prop. Clockwise rotation.

Location: Midwest USA

Add to Cart View Details

LIGHTNIN NA33 CLAMP-ON

Stock #352-300

LIGHTNIN NA33 CLAMP-ON

Stock #352-300

Used Lightnin model NAG33 clamp-on pneumatically driven agitator drive. S/N 81/801264.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details