Double & Single Arm Mixers

0.5 Litre Polish Stainless Steel Z Blade Mixer

Stock #UG6231

0.5 Litre Polish Stainless Steel Z Blade Mixer

Stock #UG6231

New Polish made stainless steel laboratory sigma blade mixer. Mixing trough has total capacity of 0.5 l and working capacity of 1.0 l. It is equipped with heating/cooling jacket. Mixing trough internal pressure: atmospheric with possible minimal vacuum to remove...

Location: POLAND

Add to Cart View Details

3 Quart (.75 Gallon) Beken Bromley DA Stainless Steel Jacketed Mixer

Stock #20819-2

3 Quart (.75 Gallon) Beken Bromley DA Stainless Steel Jacketed Mixer

Stock #20819-2

Used Bramley Beken blade mixer. Size 3/4 (.75 gallon), Serial #1240. New 1992. Has stainless steel contacts, Naben style blade. Driven by 1 HP motor, 3/60/230-460 volts. Unit is is jacketed and has tilt discharge. Includes start/stop panel.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

10 Gallon Patterson Stainless Steel Masticator Blade Mixer

Stock #20156-04

10 Gallon Patterson Stainless Steel Masticator Blade Mixer

Stock #20156-04

Used Patterson approximately 10 gallon stainless steel masticator blade mixer. Jacket rated 100 psi. 11″ wide X 16″ long X 16″ deep. Pneumatic tilt. 10 HP drive with VFD control unit. 3 phase, 60 cycle, 230-460 volts. Used for a...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

10 Litre Winkworth Stainless Steel Z-Blade Mixer

Stock #RG9559

10 Litre Winkworth Stainless Steel Z-Blade Mixer

Stock #RG9559

Used Winkworth Machinery stainless steel Z-blade mixer. Material (coated), Capacity 10 Ltr, Trough sizes 275x280x150mm, With cover, With jacket, With electric heating, Double geared . Hydraulic driven, Motor (3x), With hydraulic unit, Screw discharge.

Location: THE NETHERLANDS

Add to Cart View Details

11.25 Litre Winkworth Type 10Z VAC JKT Stainless Steel Z Blade Mixer

Stock #L1335-07

11.25 Litre Winkworth Type 10Z VAC JKT Stainless Steel Z Blade Mixer

Stock #L1335-07

Used Winkworth model 10Z VAC JKT vacuum jacketed stainless steel Z blade mixer. Has 6-9 litre working capacity and 11.25 litre total capacity. Mixing chamber 250mm X 250mm X 200mm deep. Z-blades direct driven by 1.5 kw 240/415 volt 3/50...

Location: Perry England Warehouse

Add to Cart View Details

12.5 Litre Battaggion Bergamo Type IP 2C 10 AP/S Stainless Steel Z-Blade Mixer

Stock #RG9560

12.5 Litre Battaggion Bergamo Type IP 2C 10 AP/S Stainless Steel Z-Blade Mixer

Stock #RG9560

Used Battaggion Bergamo Type IP 2C 10 AP/S stainless steel (304) Z-blade mixer “Mixtruder”, Capacity 12,5 Ltr, Useful capacity 4-7 Ltr, Trough sizes 235x255x250mm, With cover, Working pressure vacuum, With jacket, Max. temperature 180 Degr. C., Motor 3,0 KW, 220/380...

Location: THE NETHERLANDS

Add to Cart View Details

15 Gallon Groupe Lautrette Mdl MBD-90/60 Stainless Steel Jacketed Sigma Blade Mixer Extruder

Stock #ZG62428

15 Gallon Groupe Lautrette Mdl MBD-90/60 Stainless Steel Jacketed Sigma Blade Mixer Extruder

Stock #ZG62428

Used 15 Gallon Jacketed, Vacuum, Sigma Blade Mixer/ Extruder. Stainless steel Groupe Lautrette (RPA Process) Model MBD-90/60 Jacket rated 3 Bar. Vacuum internal, heavy duty sigma blade mixer/ extruder. Stainless steel construction. 90 liter (22.5 gallon) total capacity. 60 Liter...

Location: Northeast USA

Add to Cart View Details

20 Litre AMK Model VIU-20 Stainless Steel Z-Blade Mixtruder

Stock #RG8475

20 Litre AMK Model VIU-20 Stainless Steel Z-Blade Mixtruder

Stock #RG8475

Used AMK model VIU-20 stainless steel Z-blade mixtruder. Approximately 20 litre working capacity and 32 litre total capacity. Mixing trough approximately 340mm X 340mm X 350mm deep. Includes cover and internal rated full vacuum. External jackets 41, 6, and 4...

Location: EU

Add to Cart View Details

20 Litre AMK Model VIU-20/IV Stainless Steel Z-Blade Mixtruder

Stock #RG9139

20 Litre AMK Model VIU-20/IV Stainless Steel Z-Blade Mixtruder

Stock #RG9139

Used AMK Peter Küpper Aachen, type VIU-20/IV extrusion kneader, Z-blade mixer “Mixtruder”. Designed in stainless steel (1.4571/1.4408). Total capacity 32 liter, working capacity 20 liter. Working pressure vacuum, with jacket (7,2 liter). Trough dimensions: 340x340x350 mm. Equipped with a cover....

Location: EU

Add to Cart View Details

75 Litre Winkworth Model 21Z LD.NT Stainless Steel Z-Blade Mixer

Stock #RG9062

75 Litre Winkworth Model 21Z LD.NT Stainless Steel Z-Blade Mixer

Stock #RG9062

Used Winkworth model 21Z =LD-.NT stainless steel Z-blade mixer. Approximately capacity 75 ltr Mixing trough approximately 540mm X 540mm X 510mm deep. Mixing blades driven by approximately 4 kW motor and gearbox.Tipping Chamber with Motor, gearbox and starter.  

Location: UK

Add to Cart View Details

100 Gallon Day Steel Jacketed Mixtruder

Stock #9537-10

100 Gallon Day Steel Jacketed Mixtruder

Stock #9537-10

Used Day 100 gallon, 50 gallon working capacity steel mixtruder. 32″ X 32″ X 30″. Jacketed. 40 HP main drive, 40 HP screw drive, hydraulic power pack. All on one skid, with bolt-on lid.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

100 Litre AMK Peter Küper Stainless Steel (AISI 316) Z-blade Mixer

Stock #H3972

100 Litre AMK Peter Küper Stainless Steel (AISI 316) Z-blade Mixer

Stock #H3972

Used AMK Peter Küper stainless steel (AISI 316) Z-blade mixer. Has approx. 100 litre working capacity, mixing trough approx. 500 mm x 460 mm x 410 mm deep. Mixing blade driven by el. motor through gearbox. Hydraulically operated tilt discharge...

Location: Perry Czech Warehouse

Add to Cart View Details

110 Litre AMK Model II U-110 Stainless Steel Z-Blade Mixer

Stock #RG9128

110 Litre AMK Model II U-110 Stainless Steel Z-Blade Mixer

Stock #RG9128

Used AMK model II U-110 stainless steel jacketed Z-blade mixer. 110 litre working capacity. Mixing trough approximately 595mm X 595mm X 300mm deep. Has stainless steel jacket and hinged cover. Mixing blades driven by 7.5 kW 220/380 volt 3/50 motor...

Location: EU

Add to Cart View Details

125 Litre Stainless Steel Sigma Blade Double Arm Mixer

Stock #HG62037

125 Litre Stainless Steel Sigma Blade Double Arm Mixer

Stock #HG62037

Little used stainless steel 100 litre working capacity and 125 liter sigma blade double arm mixer made Czech Republic. Stainless steel 316L blades driven through gear box by EL motor 3 PH/400 V/50 HZ/1x 4 kW and 1 X 3...

Location: Central Europe

Add to Cart View Details

145GAL SS SIGMA 15 HP JACKET NEW

Stock #HG62194

145GAL SS SIGMA 15 HP JACKET NEW

Stock #HG62194

NEW STAINLESS STEEL 550 LITRE (145 GALLON)CAPACITY, SIGMA BLADE DOUBLE ARM MIXER MADE CZECH REPUBLIC TYPE H 500 2SVPA. STAINLESS STEEL BLADES DRIVEN THROUGH GEAR BOX BY EL. MOTOR 3PH/400V/50Hz/2x 7,5kW, BLADES ROTATES VARIABLE 10 – 50 RPM. STAINLESS STEEL...

Location: N/A

Add to Cart View Details

300 Gallon Aaron Steel Sigma Blade Mixer Extruder

Stock #599-07

300 Gallon Aaron Steel Sigma Blade Mixer Extruder

Stock #599-07

Used 300 gallon Aaron sigma blade mixer extruder. Steel construction with jacketed chamber. Serial # 93300150464MX. Includes approximately 13″ diameter discharge screw driven by 75 HP AC motor with Fincor model 3160M SCR control. Has Olsun isolation transformer, 460-460Y-266, 93...

Location: Midwest USA

Add to Cart View Details

300 Litre WP Stainless Steel Sigma Blade Double Arm Mixer

Stock #H3887

300 Litre WP Stainless Steel Sigma Blade Double Arm Mixer

Stock #H3887

Used stainless steel 300 litre (79 gallon) capacity sigma blade double arm mixer made by WP (Germany). Stainless steel vessel inside measures 820mm long X 800mm wide X 700mm deep. Stainless steel blades are driven through gear box and belts...

Location: Perry Czech Warehouse

Add to Cart View Details

400 Litre Model HM 500 2SV Stainless Steel Sigma Blade Double Arm Mixer

Stock #HG59209

400 Litre Model HM 500 2SV Stainless Steel Sigma Blade Double Arm Mixer

Stock #HG59209

Used stainless steel 400 litre (105 gallon) working capacity and 500 liter sigma blade double arm mixer made Czech Republic type HM 500 2SV. Stainless steel 316L blades driven through gear box by EL. motor 3PH/400V/50HZ/2x 7,5kW, blades rotates variable...

Location: Central Europe

Add to Cart View Details

400 Litre Nagema Model DMK400 Stainless Steel Sigma Blade Double Arm Mixer

Stock #H2034-V

400 Litre Nagema Model DMK400 Stainless Steel Sigma Blade Double Arm Mixer

Stock #H2034-V

Used stainless steel 400 litre (105 gallon) working capacity sigma blade double arm mixer made by Nagema (Germany) type DMK400. Has carbon steel heating/cooling jacket – atmospheric pressure. Stainless steel claded blades are driven through gear box and belts with...

Location: Perry Czech Warehouse

Add to Cart View Details

400 Litre Redoctober Type 3W-400-K Stainless Steel Sigma Blade Double Arm Mixer

Stock #AG61918

400 Litre Redoctober Type 3W-400-K Stainless Steel Sigma Blade Double Arm Mixer

Stock #AG61918

Used stainless steel 400 litre (105 gallon) working capacity sigma blade double arm mixer made by Redoctober (Ukraine) type ЗШ-400-К. Unit has heating-cooling jacket 0.6 bar pressure. Working camera has atmospheric pressure. Working temperature 0-160*C. Unit equipped with two counter...

Location: Europe

Add to Cart View Details

450 Litre Vickers Model 43Z Stainless Steel Jacketed Z-Blade Mixer

Stock #RG7472

450 Litre Vickers Model 43Z Stainless Steel Jacketed Z-Blade Mixer

Stock #RG7472

Used Vickers model 43Z stainless steel jacketed Z-blade mixer. 450 litre working capacity and 600 litre total capacity. Mixing trough 1092mm long X 960mm wide X 740mm deep. Has stainless steel water jacket for heating and cooling. Standard mixing blades...

Location: UK

Add to Cart View Details

500 Litre Hecrona Stainless Steel Jacketed Z-Blade Mixer

Stock #UG6142

500 Litre Hecrona Stainless Steel Jacketed Z-Blade Mixer

Stock #UG6142

Renovated second hand stainless steel contact parts z-blade mixer by Hecrona (Germany) with total volume of mixing chamber 500 l. Internal dimensions of mixing chamber are: width 860 mm x length 870 mm x depth 690 mm. Mixing chamber is...

Location: PL

Add to Cart View Details

900 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8771

900 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8771

Used Baker Perkins mild steel jacketed Z blade mixer. 900 litre working capacity. Mixing trough 1320mm long X 1070mm wide X 1100mm deep. Has single curve serrated sheredder/dispersion blades with screw tilt discharge. Driven by 17/15kW gear drive (suitable for...

Location: UK

Add to Cart View Details

1,000 Litre Werner & Pfleiderer Z-Blade Mixer, Refurbished

Stock #UG6143

1,000 Litre Werner & Pfleiderer Z-Blade Mixer, Refurbished

Stock #UG6143

Refurbished second hand Z-blade mixer by Werner & Pfleiderer (Germany) with volume of mixing chamber 1000 liters. Mixing chamber has stainless steel heating jacket. Contact parts designed in stainless steel. Mechanical tilt discharge. Machine is equipped with stainless steel contact...

Location: PL

Add to Cart View Details

1,600 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8772

1,600 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8772

Used Baker Perkins mild steel jacketed Z blade mixer. 1600 litre working capacity. Mild steel mixing trough 1830mm long X 1370mm wide X 1070mm deep. Has twin single curve dispersion blades. Driven by 50kW motor with separate drive for mechanical...

Location: UK

Add to Cart View Details

Stainless Steel Day Mixtruder

Stock #825-76

Stainless Steel Day Mixtruder

Stock #825-76

Used Day Mixtruder Stainless steel, jacketed Atmos @ 353 degrees F internal 125 psi @ 353 degrees jacket 30″ x 32″ Tilt discharge Built 1971

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details