Mills Miscellaneous

1.1 KW Vertical Mill By Hobart Model FD2-150

Stock #U2368-3

Used vertical carbon steel mill (garbage disposal) by Hobart model FD2-150 for semi-liquid products. Mill has stainless steel feeding hopper, with inlet diameter 180 mm. Bottom driven rotor has diameter 150 mm and is directly driven by el. motor 1.1...

Location: Perry Poland Warehouse

Get a Quote View Details

1.5 kW Carbon Steel Grinding Mill

Stock #UG6165

Used carbon steel grinding mill for wet biomass. Mill is equipped with carbon steel milling knives mounted on shaft and static knives mounted on internal walls of chamber. All knives are easy to exchange. Shaft is driven by electric motor...

Location: PL

Get a Quote View Details

3 kW Forplex Carbon Steel Universal Mill

Stock #U2292-10

Used carbon steel universal mill by Forplex. Mill has non-corrosive rotor with external diameter 145 mm and carbon steel stator. There is also insert with screen, with internal diameter 145 mm and external diameter 190 mm. Rotor is belt driven...

Location: PL

Get a Quote View Details

3 kW MLYNPOL Carbon Steel Turbo Mill

Stock #U2194-4

Used carbon steel, turbo Mill by MLYNPOL (Poland). Mill has carbon steel screen with diameter 220 mm. Rotor has a diameter 200 mm and is driven by EL. Motor 3 kW, 2820 rpm, 380 V, 50 Hz, via belts. Mill...

Location: Perry Poland Warehouse

Get a Quote View Details

4 kW PSP Model 2164 Carbon Steel Pin Mill

Stock #H4262-1

Used carbon steel pin mill made by PSP Prerov (czech republic) type 2161. Carbon steel rotor diameter 280 mm with 2400 rpm driven by el. motor 3ph/380v/50hz/4kW. max. capacity up to 120 kg/hour depending on inlet product.

Location: Perry Czech Warehouse

Get a Quote View Details

5 kW Carbon Steel Spomasz Mill

Stock #U1779-2

Used Mill by Spomasz (Poland). Output depends on material and can reach 30-50 kg/h. Mill is driven by electric motor with power 5 kW. Milling elements are designed for work on spices and herbs (cutting Wheel). Shipping dimensions: width 620...

Location: Perry Poland Warehouse

Get a Quote View Details

10 kW Jehmlich Type Record C Carbon Steel Beat Mill

Stock #U2261-5

Used Jehmlich (Germany) type Record C carbon steel beat mill. Unit has cast iron body and carbon steel beater-discs. Mill has a rotor with diameter 440 mm and stator with diameter 370 mm. Rotor is driven by el. motor 10...

Location: PL

Get a Quote View Details

10 kW Jehmlich Type Record C Carbon Steel Beat Mill

Stock #U2261-6

Used Jehmlich (Germany) type Record C carbon steel beat mill. Unit has cast iron body and carbon steel beater-discs. Mill has a rotor with diameter 440 mm and stator with diameter 370 mm. Rotor is driven by el. motor 10...

Location: PL

Get a Quote View Details

11 KW Jehmlich model Rekord BT Turbo/Cage Mill

Stock #U2420-1

Used Jehmlich (Germany) model Rekord BT turbo/cage mill designed in carbon steel. Mill has rotor with diameter 320 mm and insert with screen. Insert has outside diameter 380 mm. Top feeding, via stainless steel hopper. Bottom discharge outlet. Mill is...

Location: Perry Poland Warehouse

Get a Quote View Details

11 kW Veb Nosser Cage Mill/Universal Mill

Stock #UG6217

Second hand universal mill (cage type) by VEB Nosser (Germany). Rotor diameter 310 mm, screen with outside diameter 382 mm. Mill is driven via belts by el motor 11 kW, 2900 rpm, 380V, 50 hz. Mill is mounted on carbon...

Location: PL

Get a Quote View Details

15 kW Carbon Steel Universal Mill

Stock #U2281-2

Used carbon steel universal mill with milling plate with diameter 335 mm. Stator plate has diameter 290 mm and is bolted on two bolts. Inside the milling chamber there is instaled insert with screen, with outside diameter 400 mm. Rotor...

Location: PL

Get a Quote View Details Watch Video

15 kW Dagnoni Milano Carbon Steel Universal Mill

Stock #U2200-3

Used carbon steel universal Mill by Dagnoni Milano (Italy). Mill has rotor with diameter 440 mm and Stator with diameter 300 mm. Rotor is belt driven by EL. Motor 15 kW, 2940 rpm, 400V, 50 Hz in EX design (EEx...

Location: Perry Poland Warehouse

Get a Quote View Details

22 kW Jehmlich Type Record D Carbon Steel Mill

Stock #U2261-1

Used Jehmlich (Germany) model Record D carbon steel beat mill (universal mill). Unit has cast iron body and carbon steel beater-discs. Mill has stator and rotor with diameter 570 mm. Rotor is driven via belts by el. motor 22 kW,...

Location: PL

Get a Quote View Details

22 KW Nara Model NHS-3 Hybridization System

Stock #RG1055

Used Nara model NHS-3 Hybridization system for surface modification & preparation of composite materials of fine particals by dry powder processing. Typically being used for coating, embedding and rounding of particals. All contact parts in stainless steel. Main rotor diameter...

Location: Europe

Get a Quote View Details

50 HP Pallman Dual Drive Pelletizer

Stock #ZP57792-1

Used Pallmann dual drive pelletizer with approximately 50 HP and 20 HP motors. Each motor is belt driven.

Location: Western USA

Get a Quote View Details

7,5 kW Carbon Steel Universal Mill

Stock #U2218

Used carbon steel universal mill with rotor diameter 320 mm, Stator has diameter 350 mm. Mill also is equipped with screen insert with diameter 365 mm. Mill is belt driven by EL motor 7,5 kW, 2920 rpm, 380 V, 50...

Location: PL

Get a Quote View Details

75 kW TMS MK 60 M Carbon Steel Hammer Mill Grinder

Stock #HG59413

Used TMS (Czech republic) grinder, TYP MK 60 M, has rotor driven by EL. Motor 75 kW/50 HZ/400V. Max. Rotor rotation speed 2920 rpm. Unit is mounted on carbon steel construction. New 1993.

Location: Central Europe

Get a Quote View Details

100 kW Pallmann Type PR8 Grinding Mill

Stock #U2293-2

Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of...

Location: PL

Get a Quote View Details

12,5 kW Jehmlich Model Record C Carbon Steel Pin Mill

Stock #H3611

Used Jehmlich (Germany) model Record C carbon steel pin mill. Unit has cast iron body and carbon steel milling discs. Mill has (1) Stator and (1) rotor with diameter 535 mm driven via belts by el. motor 12,5 kW, 380...

Location: Perry Czech Warehouse

Get a Quote View Details

1509 kW Fuller Taylor 23.3 Diameter Sag Mill

Stock #ZG58698

Used Fuller Traylor 23.3 diameter X 8'10.5" long sag mill. General Electric 1509 kW, 3 phase, 50 hertz, 230 rpm motor. 12.13 rpm mill speed. Includes new spare pinion, air clutch, gear guard, Farval gear seat lubrication, and Trommel screen....

Location: Canada

Get a Quote View Details

Alpine Mdl D100LU Universal Grinding Mill

Stock #593-59

Used Alpine model D100LU universal grinding mill. Maximum throughput approximately 30-40 kg/h. Aluminium housing with cast iron wear proof chrome steel beater systems. Grinding chamber 105 mm, beater system 100 mm.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Alpine Mild Steel Pin Mill Type 160Z

Stock #B0099-02

Used ALPINE mild steel pin mill-Type 160Z-Rotor Ø 160 mm

Location: NEUVILLE EN FERRAIN - FRANCE

Get a Quote View Details

Carbon Steel Pin Mill

Stock #HG59592

Used carbon steel pin Mill made by Veb Nossener Maschinenbau. Carbon steel rotor diameter 500 mm driven by EL. Motor 380V/50HZ/13kW.

Location: Central Europe

Get a Quote View Details

30 HP – 22 kw – Decoval Mild Steel Crusher Type WS-MPG22

Stock #BG0125-01

Used DECOVAL crusher-Type WS-MPG22-Motor : 22 kw – Hp 30 – Rpm 1500 – 3x 400 volts-4 kw hydraulic unit-Drain screw 1.5 kw gear motor-Visible by appointment

Location: FRANCE

Get a Quote View Details

3 kw Epsilon Mild Steel Crusher

Stock #B0127-01

Used EPSILON mild steel crusher-Opening 400 x 440 mm-Gear motor control : 3 kw – Hp 4 – Rpm 17 – 3x 230/400 volts

Location: NEUVILLE EN FERRAIN - FRANCE

Get a Quote View Details

Forplex Mild Steel Hammer Mill Type FO

Stock #B0119-01

Used FORPLEX mild steel hammer mill-Type FO – Hammer tools-Motor : 1.5 kw – Hp 2 – Rpm 1500 – 220/380 volts

Location: NEUVILLE EN FERRAIN - FRANCE

Get a Quote View Details

2 HP Forplex Mild Steel Mill

Stock #VB0115-01

Used FORPLEX Mild steel mill-Similar to type F2-Construction : mild steel-Motor : Hp 2 – Rpm 1500 – 220/380 volts

Location: NEUVILLE EN FERRAIN - FRANCE

Get a Quote View Details

Glen Mills Type SK1 Laboratory Granulator-Pulverizer

Stock #7755-4

Used Glen Mills Laboratory granulator/pulverizer. Type SK1, serial #60777. Unit consists of a 3-knife rotor mounted directly on a 1.1 kW 3440 rpm motor. Fixed blades are mounted on the front of the unit as well as around the entire...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Hosokawa Micron Model Micron RI12K322CF In-Line Disintergreting Slurry Mill

Stock #L1520-02

Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a...

Location: Newton Aycliffe, UK

Get a Quote View Details Watch Video

Hosokawa Model M502NC Super Micron Mill

Stock #HG62221

Used Hosokawa model M502NC super micron mill for ultra fine grinding powders to fineness below 40 micron. There in no screens or sifting grates. Mill use combination of attrition, friction, shearing and impact in a two stage griding process. Has...

Location: Central Europe

Get a Quote View Details

Kek Model 3H Carbon Steel Pin Mill

Stock #L0958

Used Kek model 3H carbon steel pin Mill. Has 330mm diameter rotor with three rows of mild steel pins. Belt driven by 15 kW 415 volt 3/50 2940 rpm motor at maximum 8000 rpm. Door has 370mm diameter plate with...

Location: Perry England Warehouse

Get a Quote View Details

Koppers Mill Model 9X18

Stock #825-200

Used Koppers Mill Model: 9×18 Serial: 79-2230 2 sets of rolls Driven by a 10 hp motor Includes vibratory feeder

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Koppers Mill Model 9×18

Stock #825-201

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Micron Systeme Crushing Unit Type MS1250

Stock #BG0033-01

Used MICRON SYSTEME crushing unit type MS1250

Location: FRANCE

Get a Quote View Details

Mild Steel Pallmann Mill

Stock #BG0083-01

Used Mild steel PALLMANN mill-Type PRA14-N°115620050001-Year : 2005-Equipment sold as is-Visible by appointment

Location: FRANCE

Get a Quote View Details

Mixing And Big-Bag Filling Unit

Stock #BG0109-01

Used Mixing and BIG-BAG filling unit-Including:- 1 stainless steel Nautamix mixer – total volume 1500 litre,- 1 Hosokawa lock,- 1 hopper empty bag,- 1 Wam compactor,- 1 stainless steel screw,- 1 Aza aeromechanical conveyor,- 1 stainless steel dosing storage tank...

Location: FRANCE

Get a Quote View Details

Netzsch-Condux Stainless Steel Grinder Type CUM 280

Stock #BG0107-05

Used NETZSCH-CONDUX stainless steel grinder-Type CUM 280 – No. 5929-Motor : Hp 13.5-Equipment visible by appointment

Location: FRANCE

Get a Quote View Details

Pallmann Mild Steel Turbo Mill

Stock #HG59781

Used Pallmann mild steel turbo Mill. 180 mm diameter of turbo rotor. Driven by a 2,2kW,

Location: Central Europe

Get a Quote View Details

Pallmann Type PR8 Grinding Mill

Stock #U2293-3

Used body of carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 800 mm and stator also with diameter 800 mm. Contact parts designed in stone (basalt/corund). Driven by belts. Hydraulical adjustment of gap...

Location: PL

Get a Quote View Details

Pallmann Type PR8 Grinding Mill

Stock #U2293-4

Used body of carbon steel grinding mill by Pallmann (Germany) model PR8. Equipped with bolted rotor and stator each with diameter 800 mm. Belt driven, but missing pulley. Manual adjustment of gap between milling plates. Front door bolted with central...

Location: PL

Get a Quote View Details

Polish Made Carbon Steel Turbo Mill 3 KW Motor

Stock #U2106-1

Used carbon steel turbo type mill polish made. Mill has carbon steel screen with diameter 260 mm. Milling plate has a diameter 240 mm and is belt driven by el. motor with power 3 kW, 1440 rpm, 220/380 V, 50...

Location: Perry Poland Warehouse

Get a Quote View Details

Premier Stainless Steel Batch Mill, Model PSM-7

Stock #21518-04

Used Premier Stainless Steel Batch Mill Model: PSM-7 Serial: 461513-08 Year: 2008

Location: Northeast USA

Get a Quote View Details Watch Video

Premier Stainless Steel Batch Mill, Model PSM-25

Stock #21518-05

Used Premier Stainless Steel Batch Mill Model: PSM-25 Serial: 437078-07 Year: 2007 20 gallon capacity Click on the link below to see a video of the machine running.

Location: Northeast USA

Get a Quote View Details Watch Video

Retsch Crusher Type ZM100

Stock #B0117-07

Used RETSCH crusher-Type ZM100-Rotor Ø 100 mm-600 watts – Hp 0.8 – 1x 220 volts-(Calibration grid – to be provided by the customer)

Location: NEUVILLE EN FERRAIN - FRANCE

Get a Quote View Details

Retsch Model SM2000 Cutting Mill

Stock #L1559-03

Used Retsch model SM2000 cutting mill. Unit has stainless steel 6 disc rotor driven by 1.5kw, 695rpm, 3/50 motor. Unit has local controls. Mounted on a stand.

Location: Newton Aycliffe, UK

Get a Quote View Details

Retsch Rotor-Beater Mill, Model SR3

Stock #21470-04

Used Retsch Rotor-Beater Mill Manufacturer: Retsch Model: SR3

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Stainless Steel Body Of Grinding Mill Pallmann Model PP6S Jacketed

Stock #U2373

Used body of grinding mill by Pallmann (DE) model PP6S. Stainless steel construction. Milling knives and plates designed in carbon steel. Mill has milling plate with diameter 600 mm. Milling plate is designed for work on 3200 rpm. There is...

Location: Perry Poland Warehouse

Get a Quote View Details

Stainless Steel Premier Mill, Model PSM25

Stock #21567-02

Used Stainless Steel Premier Mill Model: PSM25 Serial: PSM25.92200.01.0026 Year: 2001 PSM "Baslet Type" Submersible Media Mill. Incorporates a milling chamber with independently powered virable speed mixing shafts which can process a wide range of batch sizes and viscosities. Suitable...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details Watch Video

Stainless Steel Premier Mill, PSM7

Stock #21567-03

Used Stainless Steel Premier Mill Model: PSM7 Serial: PSM7.92012.00.23 Year: 2001 PSM "Baslet Type" Submersible Media Mill. Incorporates a milling chamber with independently powered virable speed mixing shafts which can process a wide range of batch sizes and viscosities. Suitable...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details Watch Video

Szegvari Attritor Type B Size 15.5

Stock #825-74

Used Szegvari attritor by Union Process Type B, Size 15 S, No. 594 Chamber approximately 18" x 20" Missing agitator

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Szegvari Mdl 2362 Size 1-S Attritor Mill

Stock #20304-03

Used Szegvari Model 2362 Size 1-S attritor mill. Equipped with approx 3 HP vari-speed drive.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Union Process Size Q1 Stainless Steel Batch Attritor

Stock #8244-4

Used Union Process size Q1 batch attritor stainless steel, equipped with 11.2/5.6 kW 230/460/3 motor.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Used Carbon Steel Cage/Universal Mill Bauermeister Model UT32

Stock #U2407-1

Used turbo/cage type mill by Bauermeister (DE) model UT32. Designed in carbon steel. Mill has rotor with diameter 595 mm and slotted screen insert with diameter 700 mm. Mill has top feeding inlet with dimensions 150 mm x 450 mm....

Location: Perry Poland Warehouse

Get a Quote View Details

Wedco Pulverizing System Mdl SE12-TC With Blower

Stock #21248-1

Used Wedco pulverizing system. Model SE12-TC, serial #0793-8107. Includes 25 hp motors on each of the two pulverizing mills included in the system, includes Conair blower for loading, operator control panels, and cyclones. System mounted in common frame.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Wedco Pulverizing System Mdl SE12-TC With Blower

Stock #21248-2

Used Wedco pulverizing system Model SE12-TC. Includes 25 hp motors on each of the two pulverizing mills included in the system, includes Conair blower for loading, operator control panels, and cyclones. System mounted in common frame.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

Wedco Pulverizing System Mdl SE12-TC With Blower

Stock #21248-3

Used Wedco pulverizing system. Model SE12-TC, serial #543-0978. Includes 25 hp motors on each of the two pulverizing mills included in the system, includes Conair blower for loading, operator control panels, and cyclones. System mounted in common frame.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details