Batch Ball Mills

15″X 21″ PATTERSON CS BALL MILL W/ SS HOUSING

Stock #20901

15″X 21″ PATTERSON CS BALL MILL W/ SS HOUSING

Stock #20901

Used 15″ x 21″ Patterson Ball Mill Model: 15X21 TDX VNL Serial: X884 Carbon steel lined with 304 stainless steel housing Jacketed 8″ x 8″ access door 6″ dicharge into an 8 gallon stainless steel receiver Carbon steel ball charge...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

18″X 24″ ABBE ST 3HP

Stock #4712-18

18″X 24″ ABBE ST 3HP

Stock #4712-18

Used approx. 18″ DIA. X 24″ long steel lined batch Ball Mill manufactured by Paul O. Abbe. Has lifters. Driven by 3 HP motor, 3/60/230-460V/1725 rpm. On legs. Serial number 69678. Not jacketed.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

23″X 24″ CERAMIC BALL MILL 180 L

Stock #U2133-2

23″X 24″ CERAMIC BALL MILL 180 L

Stock #U2133-2

Used ceramic Ball Mill made by Kombinat Veb Keramische Verke(Germany). Working volume about 60 l and total volume 180 l. Milling chamber has internal dimensions: 600 mm diameter and 620 mm length. Working rotation speed 50 rpm. Machine is driven...

Location: Perry Poland Warehouse

Add to Cart View Details

30″X 40″ CERAMIC BALL MILL 180 L

Stock #H3615-1

30″X 40″ CERAMIC BALL MILL 180 L

Stock #H3615-1

Used ceramic batch Ball Mill total capacity 180 litre made by Kombinat Veb Keramische Verke (Germany). Milling drum has inside dimensions approximately 600 mm long X 620 mm diameter, driven by EL. Motor through gearbox 1,1 kW, 220/380V, 910 rpm,...

Location: CZ

Add to Cart View Details

36″X 30″ PATTERSON JKT W/MTR

Stock #398-53

36″X 30″ PATTERSON JKT W/MTR

Stock #398-53

Used 36″X36″ Patterson pebble Mill with jacketed chamber. Includes 5HP 3/60/230volt/TEFC motor, bull gear and pinion drive. Includes dust cover. S/N M4273, jacket working pressure 25psi. Rating. Porcelain brick lined that looks good.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

47″X 39″ CERAMIC LINED, 800L TOTAL

Stock #HG59519

47″X 39″ CERAMIC LINED, 800L TOTAL

Stock #HG59519

Used batch carbon steel ceramic lined Ball Mill for wet grinding with approx. 800 litre total capacity of the milling drum. External drum diameter 1200 mm X 1000 mm external length of drum. Milling chamber driven through gear box and...

Location: CZ

Add to Cart View Details

47″X 50″ NETZSCH 1583 L

Stock #HG59473

47″X 50″ NETZSCH 1583 L

Stock #HG59473

Used carbon steel Ball Mill made Netzsch, with total volume 1583 litres. Milling chamber has external diameter 1200 mm X 1400 mm total. Length straight is 1000 mm. 4 bar internal pressure. Feeding inlet has 450 X 350 mm. Motor...

Location: CZ

Add to Cart View Details

48″X 84″ NEWELL DUNFORD S/S JKT 37KW UNUSED

Stock #KG61404

48″X 84″ NEWELL DUNFORD S/S JKT 37KW UNUSED

Stock #KG61404

Reportedly unused Newell Dunford 1220 mm diameter X approx.2135mm long stainless steel Ball Mill with total volume approx 2500 LTR. Stainless steel chamber working pressure 0-3 bar,design pressure 3-5 bar, test pressure 5-25 bar. Chamber has jacket made of carbon...

Location: EUROPE

Add to Cart View Details

57″X 57″ ABBE BRICK LINED 630 GAL

Stock #9556-08

57″X 57″ ABBE BRICK LINED 630 GAL

Stock #9556-08

Used Paul O Abbe model PM-3C brick lined Ball Mill. Approximately 57″ diameter X 57″ long. 84 cubic feet, 630 gallon capacity. 13″ X 15″ charge/discharge with cover. Driven by 15 HP, 3 phase, 60 cycle, 220/460 volt, 875 rpm...

Location: Midwest USA

Add to Cart View Details

60″X 96″ MARCY REFURBISHED BALL MILL 75HP

Stock #ZW60588

60″X 96″ MARCY REFURBISHED BALL MILL 75HP

Stock #ZW60588

Used Marcy 5’X8′ refurbished Ball Mill with 75 HP motor. Includes the following: – spur type ring and pinion gears – unused rubber liners – Babbit Trunnion bearings – Babbit pinion shaft bearings – 75 HP 575 volt, 3 phase,...

Location: Canada

Add to Cart View Details

72″X 72″ P.O. ABBE STEEL JKTD. 60 HP REQ’D

Stock #17642-5

72″X 72″ P.O. ABBE STEEL JKTD. 60 HP REQ’D

Stock #17642-5

Used Paul O. Abbe approx. 6′ DIA. X 6′ long jacketed batch Ball Mill. Mill is jacketed for 14 1/2 psi water. Last used wet. Pedestals for mounting on floor level. No drive or pinion; previously had 60 HP gearhead...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

74″X110″ 7800 LTR JKT 30KW S/S

Stock #KG61204

74″X110″ 7800 LTR JKT 30KW S/S

Stock #KG61204

Used 1880 mm diameter X approx.2800mm long stainless steel Ball Mill, wall thickness 16mm, total volume 7.8 cub.M. Has a cooling jacket made of carbon steel with wall thickness 5mm and cooling surface 16 sq.M., water consumption 9.6 cub.M/hour. Has...

Location: EUROPE

Add to Cart View Details

90″X126″ DENVER 600 HP

Stock #ZG58922

90″X126″ DENVER 600 HP

Stock #ZG58922

Used Denver 8’ diameter X 10′ long Ball Mill.. Trunnion bearings with bearing inserts. Spiral discharge. Single helical 2 piece bull ring gear, single helical pinion with bearings. Direct drive through pinion. Sole plates. Electrical switchgear, liners and 600 HP...

Location: Canada

Add to Cart View Details

US STONEWARE ROLL JAR MILL

Stock #20405-2

US STONEWARE ROLL JAR MILL

Stock #20405-2

Used US stoneware long roll jar Mill, 2-tier 36″ roll length. Dual 3/4 HP motor maximum loading per tier 240 lbs.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details