25 - 60 HP Granulators

Expanded View

18.5 KW Alpine B32/40 RO Cutting Mill With Equipment

Stock #U2333-5

18.5 KW Alpine B32/40 RO Cutting Mill With Equipment

18.5 KW Alpine B32/40 RO Cutting Mill With Equipment

Stock #U2333-5

Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor...

Location: Perry Poland Warehouse

Add to Cart View Details

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-518

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-518

Used Nelmor Model G1620 Granulator. Has 16″ x 20″ feed throat, 3 knife solid rotor, 2 bed knives. Driven by a 25 hp, 460 volt motor. Mounted on casters. Includes with starter and controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-519

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

20 HP 16″ x 20″ Nelmor Model G1620 Granulator

Stock #21010-519

Used Nelmor Model G1620 Granulator. Has 16″ x 20″ feed throat, 3 knife solid rotor. Driven by a 25 hp 460 volt motor. Mounted on casters. Includes starter and controls.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 12″ X 15″ Nelmor Model G1215M1 Granulator

Stock #6169-3

25 HP 12″ X 15″ Nelmor Model G1215M1 Granulator

25 HP 12″ X 15″ Nelmor Model G1215M1 Granulator

Stock #6169-3

Used Nelmor 12″ X 15″ Granulator. Model G1215M1, Serial #800515261. Belt driven to 25 HP motor. Has 3 steep angle knives mounted on closed rotor. Equipped with .125″ O.D. Screen. Includes tray feed hopper. Mounted on drum high discharge.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 12″ X 18″ Hydreclaim Model 1218 CTE Small Parts Granulator

Stock #6319-6

25 HP 12″ X 18″ Hydreclaim Model 1218 CTE Small Parts Granulator

25 HP 12″ X 18″ Hydreclaim Model 1218 CTE Small Parts Granulator

Stock #6319-6

Used Hydreclaim small parts Granulator. Model 1218 CTE, Serial # 01152. Has 12″ X 18″ throat opening with sound enclosed top and side feed hopper. Has 2 knife slant cut open rotor with approx 1/2″ screen. Tray feed height 52″...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 16″ X 16″ LR Systems Model SG400 Granulator

Stock #20466-747

25 HP 16″ X 16″ LR Systems Model SG400 Granulator

25 HP 16″ X 16″ LR Systems Model SG400 Granulator

Stock #20466-747

Used LR Systems Granulator. Model SG400, Serial #6557, new 1996. Has 16″ X 16″ throat opening. Driven by an approximately 25 HP granulator. Includes motor starter and 5 HP blower for discharge. Also includes oversized hopper for accepting air conveyed...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

25 HP 640mm ID x 470mm Deep 17″ Crusher Polish Made

Stock #U2085-8

25 HP 640mm ID x 470mm Deep 17″ Crusher Polish Made

25 HP 640mm ID x 470mm Deep 17″ Crusher Polish Made

Stock #U2085-8

Used Polish made crusher. Has vertical chamber with bottom side discharge. Internal diameter 640 mm x depth 470 mm. Has two knives mounted on round rotor which is bottom belt driven by motor 18.5 kW, 2930 rpm, 380 V, 3/50...

Location: Perry Poland Warehouse

Add to Cart View Details

25 HP Tria Model 45-35/CN-SL Cutting Granulator

Stock #H4042-2

25 HP Tria Model 45-35/CN-SL Cutting Granulator

25 HP Tria Model 45-35/CN-SL Cutting Granulator

Stock #H4042-2

Used TRIA model 45-35/CN-SL horizontal cutting granulator. Rotor width 450mm, rotor diameter 350mm, open rotor, number of rotor knives: 3, number of stator knives: 2, cross cut. With hopper, hinged top, motor Siemens 18,5kW/21,3kW, 50Hz/60Hz, 400V/460V, 1465rpm/1765rpm. Inlet opening 460...

Location: CZ

Add to Cart View Details

30 HP 8″ X 16″ Allsteele Grinder

Stock #585-39

30 HP 8″ X 16″ Allsteele Grinder

30 HP 8″ X 16″ Allsteele Grinder

Stock #585-39

Used 30 HP Allsteele Grinder. Has 8″ X 16″ opening with standard tray feed hopper. Driven by a 30 HP direct connected motor. Grinder is mounted on Gaylord high stand.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-18

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-18

Andritz Sprout-Bauer Model DSF1518 granulator, S/N 2000-00373, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film...

Location: Midwest USA

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-17

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-17

Andritz Sprout-Bauer Model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film granulation (3...

Location: Midwest USA

Add to Cart View Details

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-19

30 HP 15″ X 18″ Sprout Bauer Model DSF1518 Granulator

Stock #20094-19

Andritz Sprout-Bauer Model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5″ X 18″ blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter20094-19/controls designed for film granulation (3...

Location: Midwest USA

Add to Cart View Details

30 HP AEC “Under the Press” Low Profile Granulator

Stock #21216-75G

30 HP AEC “Under the Press” Low Profile Granulator

30 HP AEC “Under the Press” Low Profile Granulator

Stock #21216-75G

Used AEC “Under-The-Press” low profile granulator. Model 1256, serial #509000-09001. Belt driven by 30 hp motor, and includes paddle blade feed assist, air cylinder chamber tilt, blower discharge cyclone & frame, spare blades and discharge dust collection sock frame.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

40 HP 24″ x 26″ Foremost Model HLD-7A granulator

Stock #21010-372

40 HP 24″ x 26″ Foremost Model HLD-7A granulator

40 HP 24″ x 26″ Foremost Model HLD-7A granulator

Stock #21010-372

Used 24″ x 26″ Foremost Granulator. Model HLD-7A, Serial #37477. Has 2-knife open rotor. Rotor is offset for accomodating large parts. Driven by a 40 hp, 460 volt motor. Includes discharge blower, small cyclone and stand alone control panel.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

40 HP Rapid Model 640 KU Cutting Granulator

Stock #H4042-1

40 HP Rapid Model 640 KU Cutting Granulator

40 HP Rapid Model 640 KU Cutting Granulator

Stock #H4042-1

Used RAPID model 640 KU horizontal granulator. Rotor width 600mm, rotor diameter 400mm, open rotor, number of rotor knives: 6 knives in 3 lines, number of stator knives: 2, with hopper, hinged top, motor Siemens 30,0kW/34,5kW, 50Hz/60Hz, 400V/460V, 1465rpm/1765rpm. Inlet...

Location: CZ

Add to Cart View Details

50 HP 10″ X 19″ Hydreclaim Dual Chamber Granulator

Stock #9219-06

50 HP 10″ X 19″ Hydreclaim Dual Chamber Granulator

50 HP 10″ X 19″ Hydreclaim Dual Chamber Granulator

Stock #9219-06

Used Hydreclaim dual chamber granulator. Has 10″ X 19″ feed throat with straight drop hopper. Each chamber, upper and lower, equipped with 50 HP belt driven motor, 230/460 volt. Includes 15 HP blower discharge.

Location: Northeast USA

Add to Cart View Details

50 HP 12″ X 17″ Taylor Stiles Style #12 Hammermill

Stock #M3625J-003

50 HP 12″ X 17″ Taylor Stiles Style #12 Hammermill

50 HP 12″ X 17″ Taylor Stiles Style #12 Hammermill

Stock #M3625J-003

Used Taylor Stiles Hammermill, Style #12, having 11″ pull rolls and a 23-blade rotor. 12″ X 17″ throat opening, 5/16″ screen. Outboard bearings with oil mist lubrication system. 3/4 HP pull rolls, 50 HP main motor. 220/440/3/60. Machine #2936. Previously...

Location: NJ

Add to Cart View Details

50 HP 18″ X 50″ TRIA Model 120-49/TR-NS Granulator

Stock #ZP62807

50 HP 18″ X 50″ TRIA Model 120-49/TR-NS Granulator

50 HP 18″ X 50″ TRIA Model 120-49/TR-NS Granulator

Stock #ZP62807

Used TRIA Model 120-49/TR-NS Granulator. Has 17.75″ X 50.25″ feed throat opening but also equipped with 38″ wide steel feed rolls with dancer bar. Has 5-knife open style rotor and 2 bed knives with water cooled bed knife blocks. Driven...

Location: Midwest USA

Add to Cart View Details

50 HP Granutec Grinder, 14″ x 24″ Throat

Stock #21051-80

50 HP Granutec Grinder, 14″ x 24″ Throat

50 HP Granutec Grinder, 14″ x 24″ Throat

Stock #21051-80

Used 14″ x 24″ Granutec Granulator. Model TFG1424. Has 3 knife slant cut open rotor with (2) bed knives. Driven by a 50 hp 460 volt motor. Includes insulated tray feed hopper and body panels discharge. Equipped with starter and...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

60 HP 16″ x 36″ Ball & Jewel Model BJG1634 Granulator

Stock #21162-115

60 HP 16″ x 36″ Ball & Jewel Model BJG1634 Granulator

60 HP 16″ x 36″ Ball & Jewel Model BJG1634 Granulator

Stock #21162-115

Used Ball & Jewel Model BJG1634, 16″ x 34″ granulator. New 1996. Serial #96-11-38500. Includes (2) 30HP motors, belt driven to each side of thge 34″ rotor. Includes a motor starter.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

60 HP 16″ x 36″ Nelmor Model G1634 Sheet Grinder

Stock #21162-114

60 HP 16″ x 36″ Nelmor Model G1634 Sheet Grinder

60 HP 16″ x 36″ Nelmor Model G1634 Sheet Grinder

Stock #21162-114

Used Nelmor Model G1634 16″ x 36″ sheet grinder. Includes (2) 30 hp motors belt driven to each end of the 36″ wide rotor. Has approximately 16″ x 36″ feed throat opening with approximately 24″ O.D. rotor diameter. Includes motor...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details