Sheet Thermoformer

1.3′ x 1.66′ Hydrotrim Laboratory Thermoformer, Model 1620, With 16″ X 20″ Maximum Sheet Size

Stock #9392-01

1.3′ x 1.66′ Hydrotrim Laboratory Thermoformer, Model 1620, With 16″ X 20″ Maximum Sheet Size

Stock #9392-01

Used Hydrotrim Laboratory thermoformer. Model 1620, serial #1040. 16″ X 20″ maximum sheet size. Has top and bottom ceramic heat, air actuated top and bottom platens. Includes vacuum pump with reservoir and Sterlco temperature controller. Has operator control panel. 220...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

4′ X 5′ Drypoll Single Sheet Vacuum Former

Stock #ZP55957-2

4′ X 5′ Drypoll Single Sheet Vacuum Former

Stock #ZP55957-2

Used Drypoll 4′ X 5′ single sheet vacuum former, new 1984. Reported twin sheet capable including 7.5 HP vacuum pump. Hydraulic acting top and bottom platens supplying 125 psi process pressure, 30″ top stroke, 42″ bottom stroke. Has ceramic heaters,...

Location: Canada

Add to Cart View Details

4’x6′ Brown 3-Station Rotary Vacuum Former

Stock #ZP62741

4’x6′ Brown 3-Station Rotary Vacuum Former

Stock #ZP62741

Used Brown Model R223 approximately 4′ x 6′ 3-station rotary vacuum former. Unit is equipped with operator controls, 500 gallon vacuum receiver. Includes air actuated clamping frame. Includes vacuum pumping system.

Location: Mexico

Add to Cart View Details

5.0’X 9.0′ APEX PLAST DBL SIDE 1995 W/VAC PUMP

Stock #ZP53149

5.0’X 9.0′ APEX PLAST DBL SIDE 1995 W/VAC PUMP

Stock #ZP53149

Used 60″ X 108″ Apex plastics, 1995 double station single sheet vacuum former. Includes 5 HP oil film seal vacuum pump, 570 volt AC input. Platens and clamp frames are all pneumatic actuated. Sheet clamps are equipped with 1.75″ O.D....

Location: Canada

Add to Cart View Details

48″ X 96″ PVI Single Station Sheet Thermoformer

Stock #8782

48″ X 96″ PVI Single Station Sheet Thermoformer

Stock #8782

Used 48″ X 96″ PVI single station sheet thermoformer. Model 408-DP-a, S/N P408DPA-1401-789. Has 30″ stroke top platen, 40″ stroke bottom platen, with hydraulic pumping system. Has top and bottom sandwich type oven, chain driven sheet index into oven with...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

72″ X 132″ ZMD Model TWR-9611C Single Sheet Thermoformer

Stock #ZP61792

72″ X 132″ ZMD Model TWR-9611C Single Sheet Thermoformer

Stock #ZP61792

Used ZMD model TWR-9611C single sheet thermoformer with approximately 72″ X 132″ forming area. Has top and bottom platen but top heat only. Has 15″ bottom stroke, 33″ of daylight and includes (3) 80 gallon vacuum tanks. Requires 60 CFM...

Location: Northeast USA

Add to Cart View Details