Sheet Extrusion Line

8″ Wide Killion Laboratory Sheet Extrusion Line

Stock #836-03

8″ Wide Killion Laboratory Sheet Extrusion Line

Stock #836-03

Used Killion laboratory sheet extrusion line including the following: – 1.5″ Killion 30/1 L/D vented extruder with electrically heated air cooled barrel. Extruder includes (3) 2-stage screws, (2) single-stage screws. Driven by 15 hp DC motor with 11.2/1 gear ratio....

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

10″ Wide Haake Rheomix Laboratory Sheet Extrusion Line

Stock #836-10

10″ Wide Haake Rheomix Laboratory Sheet Extrusion Line

Stock #836-10

Used Haake Rheomix Laboratory Sheet Extrusion Line Including the Following: – Approx. 16 mm Thermo Haake Rheomix co-rotating twin screw extruder with 40/1 L/D, Model PTW16/40P. Has clamshell style barrel, electrically heated multi-vented barrel, water cooled, driven by 9.2 kw...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

16″ x 24″ Davis Standard Pilot/Laboratory Size Horizontal Sheet Line

Stock #21389

16″ x 24″ Davis Standard Pilot/Laboratory Size Horizontal Sheet Line

Stock #21389

Used 16″ Davis Standard Pilot/Laboratory size horizontal sheet line consisting of the following: (2) 1″ Killion/Davis Standard pedestal style Co-Extruders each 24/1 L/D driven by 3HP AC motors with individual temperature control panels, grooved feed throats, general purpose 3:1 barrier...

Location: South USA

Get a Quote View Details

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20740-2

30″ Wide Davis Standard 3-Roll Sheet Stack

Stock #20740-2

Used 30″ wide Davis Standard 3-roll sheet stack. Model F8082, SO #49606C. Rolls are driven via silent chain and sprockets by a DC motor. Has 10′ long idler conveyor, pull roll stand, and shear. Includes hydraulic pump for cylinders on...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

30″ Wide Johnson 3-Roll Sheet Down Stack

Stock #ZP57684-1

30″ Wide Johnson 3-Roll Sheet Down Stack

Stock #ZP57684-1

Used Johnson 16″ diameter X 30″ wide three-roll sheet down stack. Pneumatically operated cored chrome rolls, rolls are driven by a silent chain drive, drive gearboxes for both the chrome rolls and the pull rolls operate at 1.0, 2.07, 5.058...

Location: Midwest USA

Get a Quote View Details

34″ Wide Cincinnati Milacron 2-Roll Cooling Roll Stack

Stock #ZP58170

34″ Wide Cincinnati Milacron 2-Roll Cooling Roll Stack

Stock #ZP58170

Used Cincinatti Milacron 2-roll cooling roll stack including unwind. Also included in package is the following: – 18″X34″ wide 2-roll chrome plated cooling rolls – Driven by 5 HP DC motor Rolls are cooled via (3) 5 HP pumps with...

Location: Midwest USA

Get a Quote View Details

34″ Wide Cincinnati Milacron 2-Roll Sheet Take-Off

Stock #715-469CR

34″ Wide Cincinnati Milacron 2-Roll Sheet Take-Off

Stock #715-469CR

Used 34″ wide Cincinatti Milacron 2-roll sheet take-off with 34″ face X 18″ diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with 5 HP, 1750 DC motor through...

Location: Midwest USA

Get a Quote View Details

36″ Wide Battenfeld-Gloucester 3-Roll Inclined Sheet Stack

Stock #21176-ST

36″ Wide Battenfeld-Gloucester 3-Roll Inclined Sheet Stack

Stock #21176-ST

Used 36″ wide x 16″ diameter Battenfeld Gloucester inclined style hydraulically loaded and driven 3-roll chill roll stack. Includes hydraulic pump for roll pressure. Top & bottom roll are polished chrome plated while center roll is a matte finish. Includes...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

36″ Wide Battenfeld Gloucester Inclined Sheet Extrusion Line

Stock #21176

36″ Wide Battenfeld Gloucester Inclined Sheet Extrusion Line

Stock #21176

Used Battenfeld Gloucester 36″ wide inclined sheet extrusion line , new 1990, consisting of the following: – 3.5″ Gloucester 30/1 L/D vented extruder, model 35250, serial # 33310-01. Extruder is driven by a 150HP DC motor, direct connected to a...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

36″ Wide Davis Standard Sheet Extrusion Line

Stock #ZP61339

36″ Wide Davis Standard Sheet Extrusion Line

Stock #ZP61339

Used 36″ wide Davis Standard sheet extrusion line consisting of the following: – Used Davis Standard sheet extrusion line consisting of 4.5″ Davis standard 34:1 L/D extruder driven by a 250 HP DC motor with SCR control. Has electrically heated...

Location: Midwest USA

Get a Quote View Details

40″ Wide Johnson Sheet Extrusion Line

Stock #ZP60327

40″ Wide Johnson Sheet Extrusion Line

Stock #ZP60327

Used 40″ wide Johnson sheet extrusion line consisting of the following: – 4.5″ Johnson 24:1 L/D vented extruder with water/air cooling on barrel. Includes DC motor with Pacemaster DC drive and 11.1:1 gearbox ratio. Includes temperature control panel and Beringer...

Location: Midwest USA

Get a Quote View Details

40″ Wide Sterling Co-Extrusion Sheet Line

Stock #ZP60105

40″ Wide Sterling Co-Extrusion Sheet Line

Stock #ZP60105

Used 40″ wide Sterling co-extrusion sheet line. reconditioned in 1998-2000 to produce films of synthetic paper 4-20 mils thick. Line consists of the following: – 3.5″ Sterling 30:1 L/D extruder driven by a 125 HP DC motor with Allen Bradley...

Location: Mexico

Get a Quote View Details

41″ Wide Welex Sheet Extrusion Package

Stock #20773-1

41″ Wide Welex Sheet Extrusion Package

Stock #20773-1

Used 41″ wide Welex sheet extrusion package consisting of the following: – 3.5″ 30/1/ L/D Welex extruder. Model 3.5-30:1LHSV, serial #4746, new 05/88 Has vented and plugged barrel, but includes 2-stage screw and spare screw. Has electrically heated water cooled...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

48″ Wide Black Clawson Sheet Line

Stock #21356-2

48″ Wide Black Clawson Sheet Line

Stock #21356-2

Used 48″ Wide Sheet Line Consisting Of: (1) Black Clawson 6″ diameter single screw extruder, model 600 FXTR, approximate 24:1 L/D ratio, electrically heated, water cooled non-vented approximate 5 zone barrel with pump, tank and heat exchanger. Water cooled feed....

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

48″ Wide Davis Standard Sheet Take-Off Unit

Stock #9323-07

48″ Wide Davis Standard Sheet Take-Off Unit

Stock #9323-07

Used Davis Standard sheet take-off unit consisting of (3) 48″ face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16″ in diameter. Top roll is tungsten and the middle and bottom are chrome. Top...

Location: Midwest USA

Get a Quote View Details

50″ Wide Processing Technologies Inc 3-Roll Down Stack

Stock #ZP61834

50″ Wide Processing Technologies Inc 3-Roll Down Stack

Stock #ZP61834

Used Processing Technologies Inc. 3-roll downstack model 5024 serial no. 297-CRS manufactured 2/2000 24″ diameter X 50″ wide lower 2 chrome rolls upper roll is 12″ X 50″ all chrome rolls cored for cooling rolls are hydraulically operated and powered...

Location: Midwest USA

Get a Quote View Details

54″ Wide Davis Standard/Black Clawson Sheet Line

Stock #21356-1

54″ Wide Davis Standard/Black Clawson Sheet Line

Stock #21356-1

Used 54″ Wide Sheet Line Consisting Of: (1) Black Clawson 6″ diameter single screw extruder, model 109011460, approximate 24:1 L/D ratio, electrically heated, water cooled non-vented approximate 5 zone barrel with pump, tank and heat exchanger. Water cooled feed. Driven...

Location: Midwest USA

Get a Quote View Details

54″ Wide Marshall and Williams Sheet Take-Off Unit

Stock #9323-10

54″ Wide Marshall and Williams Sheet Take-Off Unit

Stock #9323-10

Used Marshall and Williams sheet take-off unit consisting of (3) 54″ face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16″ in diameter and are ceramic coated. Top and bottom rolls are air actuated....

Location: Midwest USA

Get a Quote View Details

62″ Wide Gloucester Engineering Sheet Extrusion Line w/6″ Gloucester Vented Extruder

Stock #ZP62577

62″ Wide Gloucester Engineering Sheet Extrusion Line w/6″ Gloucester Vented Extruder

Stock #ZP62577

Used 62″ wide Gloucester Engineering sheet extrusion line previously used on styrene. Line includes the following: 6″ Gloucester 32/1 L/D vented extruder with Gloucester screen changer 90/90 gear pump with Thermo profiler Co-ex block 60″ Ultraflex H-75 EDI die Gloucester...

Location: Northeast USA

Get a Quote View Details

66″ Wide Sterling Sheet Extrusion Line

Stock #ZP60422

66″ Wide Sterling Sheet Extrusion Line

Stock #ZP60422

Used Sterling sheet extrusion line consisting of the following: 4.5″ Sterling 36:1 L/D single screw extruder driven by a 200 HP DC motor with SCR control. Extruder has 78″ centerline. Previously used extruding horizontally into chill roll chrome nip roll....

Location: Canada

Get a Quote View Details

72″ Wide Davis Standard PET Sheet Downstream

Stock #840-55

72″ Wide Davis Standard PET Sheet Downstream

Stock #840-55

Used 72″ wide Davis Standard PET sheet extrusion downstream, new 2015. Equipment consists of the following: – Maag 20 hp melt pump – Allied Die “Duraflow” 3 layer feed block – 72″ wide Allied “Duraflow” AHM-100 flex lip sheet extrusion...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

78″ Wide PTI Sheet Line

Stock #ZP63136

78″ Wide PTI Sheet Line

Stock #ZP63136

Used PTI 78″ wide sheet line (2003) last used on PET sheet consisting of the following: A) PTI Model 6000 6″ 36:1 L/D extruder having an 8-zone electrically heated, water cooled (closed loop) and vented barrel at a 64″ center-line...

Location: Midwest USA

Get a Quote View Details

1200mm Wide Toshiba Multi-Layer Sheet Extrusion Line

Stock #ZP54282-2

1200mm Wide Toshiba Multi-Layer Sheet Extrusion Line

Stock #ZP54282-2

Used 1200mm wide Toshiba multi-layer sheet extrusion line previously used for PP/PS, 1200mm maximum width, .2-1.0mm maximum thickness. Line consists of (2) Toshiba 90mm extruders, 32:1 L/D, model SW120 screen changer, 1600mm sheet extrusion die (63″), polishing roll stand 1800mm...

Location: Japan

Get a Quote View Details