Home » Extruders 2.00" - 2.99"

Extruders 2.00" - 2.99"

2″ Hartig Extruder 30/1 L/D With Spare Screws

Stock #21058-02

2″ Hartig Extruder 30/1 L/D With Spare Screws

Stock #21058-02

Used 2″ Hartig extruder with approximately 30/1 L/D. Electrically heated and water cooled vented/plugged barrel. Driven by approximately 25 hp DC motor and SCR control. Includes temperature control panel and 6 spare screws.

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2″ Prodex Single Screw Extruder 24/1 L/D

Stock #21099-06

2″ Prodex Single Screw Extruder 24/1 L/D

Stock #21099-06

Used 2″ Prodex 24/1 L/D single screw extruder. Driven by 15 hp DC motor, includes temperature control panel, SCR controller and individual instruments for each zone. With electrically heated and water cooled barrel. Includes 2-component hopper (agitation in primary hopper),...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2″ PTI Single Screw Extruder 24/1 L/D

Stock #21099-03

2″ PTI Single Screw Extruder 24/1 L/D

Stock #21099-03

Used 2″ 24/1 L/D PTI single screw Extruder. Model 2000, Serial #2565EXT, new 1998. Has electrically heated water cooled barrel, includes pump, heat exchanger and water reservoir. Belt driven by 25 hp AC motor, 460 volt AC input, with variable...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2″ Welex Extruder L/D 24:1 3-Zone Electrically Heated Water Cooled Barrel

Stock #ZP52855

2″ Welex Extruder L/D 24:1 3-Zone Electrically Heated Water Cooled Barrel

Stock #ZP52855

Used 2″ 24:1 Welex extruder having a 3-zone electrically heated, water cooled barrel at a 42″ centerline height. Gearbox is belt driven by a 20 HP DC motor with Southcon SCR control. Panel is unitized on same base and has...

Location: Midwest USA

Add to Cart View Details

2.5″ American Kuhne 30:1 L/D Loboy Extruder

Stock #20844-55

2.5″ American Kuhne 30:1 L/D Loboy Extruder

Stock #20844-55

Used 2.5″ American Kuhne, 1999, 30:1 L/D loboy extruder, model AK250-AC ext, serial #1954, including the following: Koellmann gearbox, belt driven to 125 HP AC motor, 460 volt AC input. gearbox rated at 14:1 ratio, 150HP, 1.6 sf, at 1750...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.5″ Davis Standard Extruder 24/1 L/D

Stock #21127-01

2.5″ Davis Standard Extruder 24/1 L/D

Stock #21127-01

Used 2.5″ Davis Standard 24/1 L/D vented/plugged extruder. Model #25IN25, serial #J7012, SO #98057. New 1985, but rebuilt by Davis Standard in 2003. Has electrically heated water cooled barrel with closed loop water cooling system. Driven by a 50 hp...

Location: Midwest USA

Add to Cart View Details

2.5″ Davis Standard Extruder 24/1 L/D

Stock #21127-02

2.5″ Davis Standard Extruder 24/1 L/D

Stock #21127-02

Used 2.5″ Davis Standard 24/1 L/D extruder. Model #25IN25, serial #J7013, SO #98057. New 1985, but rebuilt by Davis Standard in 2003. Has electrically heated water cooled barrel and includes closed loop water cooling system. Driven by a 50 hp...

Location: Midwest USA

Add to Cart View Details

2.5″ Gloucester Extruder 30:1 Air-Cooled

Stock #9545

2.5″ Gloucester Extruder 30:1 Air-Cooled

Stock #9545

Used 2.5″ Gloucester model 25225R-2 extruder. Has electrically heated, air cooled barrel. Set up for contra cool, but does not include blower. Gearbox has a ratio of 9.6:1 and is direct driven by 60 HP DC motor with SCR. No...

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.5″ Killion Extruder 24:1 L/D Non-Vented Air Cooled

Stock #ZP62585

2.5″ Killion Extruder 24:1 L/D Non-Vented Air Cooled

Stock #ZP62585

Used 2.5″ 24/1 L/D Killion non-vented Extruder. Has electrically heated, air cooled barrel. Driven by a 40 HP DC motor with SCR controller. Gearbox ratio 9.3:1. Includes temperature control panel. 240 volt.

Location: Midwest USA

Add to Cart View Details

2.5″ PTI Extruder L/D 32:1 5-Zone Electrically Heated

Stock #638-610-06

2.5″ PTI Extruder L/D 32:1 5-Zone Electrically Heated

Stock #638-610-06

Used PTI Processing Technologies Model 2500 Trident Series 2-1/2″ 32:1 extruder having a 5-zone electrically heated air cooled barrel at approximately 89″ centerline height. Unit has a Koellmann Model UNEX 4.1 gearbox having a 17.533:1 reduction ratio, has a service...

Location: Midwest USA

Add to Cart View Details

2.5″ Sterling Extruder With Temp Panel

Stock #21202-2

2.5″ Sterling Extruder With Temp Panel

Stock #21202-2

Used 2.5″ Sterling 24/1 L/D extruder air cooled extruder. Includes base mounted temperature control panel w with Barber Colman AT Plus instruments, belt driven 40 hp DC motor with Reliance SCR control. 13.95/1 gear reduction. Extruder has standard centerline height....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

2.5″ Welex Extruder L/D 30:1 Vented

Stock #9547-2

2.5″ Welex Extruder L/D 30:1 Vented

Stock #9547-2

Used 2.5″ Welex model 250-30/1-RHSV 30:1 L/D extruder. Has electrically heated, air cooled, vented, and plugged barrel. Includes manual screen changer and melt pump. Gearbox driven by 50 HP DC motor with SCR control. Includes temperature control panel. Serial #2064....

Location: On Site at Perry (Hainesport, NJ - USA)

Add to Cart View Details

60mm Berstorff Single Screw Extruder 28:1 Air-Cooled

Stock #ZP60152

60mm Berstorff Single Screw Extruder 28:1 Air-Cooled

Stock #ZP60152

Used 60mm 28:1 Berstorff single screw extruder having three electrically heated, air cooled barrel zones and two oil heated zones, at a 42″ centerline height. Gearbox has a ratio of 11.2 and is driven by a 25 HP DC motor....

Location: Midwest USA

Add to Cart View Details

60mm Reifenhauser Single Screw Extruder L/D 32:1

Stock #ZP60562

60mm Reifenhauser Single Screw Extruder L/D 32:1

Stock #ZP60562

Used 60mm Reifenhauser model EH350-1-60-60 32:1 L/D single screw extruder. New 1971. Driven by 40 kW motor. Previously used at 80 kilograms per hour on polyethylene and polypropylene. Has vented barrel, candle type filter, and water cooling system. Separately available...

Location: UN

Add to Cart View Details