Extruders 1.00" - 1.99"

Expanded View

1″ Wayne Extruder 24/1 Air Cooled Barrel

Stock #820-95

1″ Wayne Extruder 24/1 Air Cooled Barrel

1″ Wayne Extruder 24/1 Air Cooled Barrel

Stock #820-95

Used 1″ 24/1 L/D Wayne non-vented laboratory Extruder, new 1984. Includes temperature control panel, air cooled barrel, and hopper. S/N 1889-884. No motor.

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.5″ Davis Standard Extruder Mdl DS-15-HM Single Screw

Stock #ZP63147

1.5″ Davis Standard Extruder Mdl DS-15-HM Single Screw

1.5″ Davis Standard Extruder Mdl DS-15-HM Single Screw

Stock #ZP63147

Used 1.5″ Single Screw Davis Standard Extruder, Model DS-15-HM, 24:1 LD, 10hp AC Motor 12.80 Gearratio, Belt Driven, 4 Barrel Zones, Air Cooled, Comes With Barrel Clamp, Hopper, and 2 Conair Screw Material Feeders New In 2005 S/N BE642 No...

Location: Midwest USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-03

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-03

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-06

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-06

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-07

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-07

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-01

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-01

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-10

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-10

Used 1.5″ Davis Standard low boy extruder Model HPE-150A, serial #BN058, new 2007. Driven by a 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-09

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-09

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-08

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-08

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-05

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-05

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-04

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-04

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Davis Standard Low Boy Extruder

Stock #21302-02

1.5″ Davis Standard Low Boy Extruder

1.5″ Davis Standard Low Boy Extruder

Stock #21302-02

Used 1.5″ Davis Standard low boy extruder with 15HP AC motor and VFD motor control. Has electric heated and air cooled barrel, and C clamp for a die. Includes temperature control panel (will accomodate 3 extruders). Includes an Approx 18″...

Location: South USA

Get a Quote View Details

1.5″ Killion Air Cooled Laboratory Extruder 24/1 L/D

Stock #836-22

1.5″ Killion Air Cooled Laboratory Extruder 24/1 L/D

1.5″ Killion Air Cooled Laboratory Extruder 24/1 L/D

Stock #836-22

Used 1.5″ Killion 24/1 L/D vented/plugged, air cooled laboratory extruder. Has standard 42″ centerline height, driven by 7.5 hp DC motor and includes Reliance SCR controller. Has 11.2/1 Coleman gearbox, includes temperature control panel. Barrel Temp ran at max

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.5″ Merritt Davis Pedestal Extruder 24:1 L/D

Stock #20869-5403

1.5″ Merritt Davis Pedestal Extruder 24:1 L/D

1.5″ Merritt Davis Pedestal Extruder 24:1 L/D

Stock #20869-5403

Used 1.5″ 24/1 L/D Merritt Davis noon-vented pedestal Extruder. Serial #04415-08. Has electrically heated, air cooled barrel. Driven by 20 HP AC motor, 230/460 volts, 1175 rpm, 3 phase, 60 hertz with control Technics variable frequency drive. Has 14/1 gearbox...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.5″ Sterling Extruder 30:1 Vented

Stock #8367-2

1.5″ Sterling Extruder 30:1 Vented

1.5″ Sterling Extruder 30:1 Vented

Stock #8367-2

Used 1.5″ 30/1 Sterling extruder having a 4-zone electrically heated water cooled (closed loop) vented and plugged barrel at approximately a 42″ centerline height. Gearbox has a ratio of 13.95:1 and is belt driven by a 10 HP power TEC...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.25″ Davis Standard Extruder, 24/1 L/D 3-Zone Air Cooled

Stock #21010-1397

1.25″ Davis Standard Extruder, 24/1 L/D 3-Zone Air Cooled

1.25″ Davis Standard Extruder, 24/1 L/D 3-Zone Air Cooled

Stock #21010-1397

Used 1.25 24/1 L/D Davis Standard pedestal mounted extruder. Model DS-125, serial K-3031. Driven by a 5 hp DC motor and scr drive. Includes 3-zone air cooled temperature control panel, electrically heated aircooled barrel. Gearbox has 15:1 ratio, 7 hp...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.25″ Davis Standard Low Boy Extruder

Stock #21302-13

1.25″ Davis Standard Low Boy Extruder

1.25″ Davis Standard Low Boy Extruder

Stock #21302-13

Used 1.25″ 24/1 L/D Davis Standard low boy extruder. New 2009. Has electric heated and air cooled barrel. Driven by 7.5 hp AC motor with VFD control. Includes temperature panel. NO base plate currently which allows for base to be...

Location: South USA

Get a Quote View Details

1.25″ Davis Standard Low Boy Extruder

Stock #21302-14

1.25″ Davis Standard Low Boy Extruder

1.25″ Davis Standard Low Boy Extruder

Stock #21302-14

Used 1.25″ 24/1 L/D Davis Standard low boy extruder. New 2009. Has electric heated and air cooled barrel. Driven by 7.5 hp AC motor with VFD control. Includes temperature panel. NO base plate currently which allows for base to be...

Location: South USA

Get a Quote View Details

1.25″ Davis Standard Low Boy Extruder

Stock #21302-11

1.25″ Davis Standard Low Boy Extruder

1.25″ Davis Standard Low Boy Extruder

Stock #21302-11

Used 1.25″ 24/1 L/D Davis Standard low boy extruder. New 2009. Has electric heated and air cooled barrel. Driven by 7.5 hp AC motor with VFD control. Includes temperature panel. NO base plate currently which allows for base to be...

Location: South USA

Get a Quote View Details

1.25″ Davis Standard Low Boy Extruder

Stock #21302-12

1.25″ Davis Standard Low Boy Extruder

1.25″ Davis Standard Low Boy Extruder

Stock #21302-12

Used 1.25″ 24/1 L/D Davis Standard low boy extruder. New 2009. Has electric heated and air cooled barrel. Driven by 7.5 hp AC motor with VFD control. Includes temperature panel. NO base plate currently which allows for base to be...

Location: South USA

Get a Quote View Details

1.25″ Killion Pedestal Co-Extruder Portable Design

Stock #21166-322

1.25″ Killion Pedestal Co-Extruder Portable Design

1.25″ Killion Pedestal Co-Extruder Portable Design

Stock #21166-322

Used 1.25″ Killion 24/1 L/D non vented Pedestal co-extruder. Driven by a 7.5HP 240 volt AC motor with Mitsubishi A700 motor control. Includes temperature control panel with 5 Eurotherm temperature controllers, melt temperature, Tach, Drive amps. Electrically heated air cooled...

Location: Northeast USA

Get a Quote View Details

1.25″ Wayne Extruder 30:1 L/D Vented Extruder

Stock #820-70

1.25″ Wayne Extruder 30:1 L/D Vented Extruder

1.25″ Wayne Extruder 30:1 L/D Vented Extruder

Stock #820-70

Used 1.25″ Wayne 30:1 L/D vented (plugged) Extruder. Serial #9414-832, new 1982. Has electrically heated air cooled barrel. Driven by a 7.5 HP DC motor with SCR control, 230 volt AC input. Includes temperature control panel, track wheels, and spare...

Location: On Site at Perry (Hainesport, NJ - USA)

Get a Quote View Details

1.75″ Davis Standard Low Boy Extruder

Stock #21302-15

1.75″ Davis Standard Low Boy Extruder

1.75″ Davis Standard Low Boy Extruder

Stock #21302-15

Used 1.75″ Davis Standard 24/1 L/D low boy extruder. Model HPE-170A, new 2006. Has electrically heated air cooled barrel. Driven by 15 hp AC motor and VFD control. Includes a temperature panel, approximately 18″ x 18″ stainless steel hopper, and...

Location: South USA

Get a Quote View Details

1.77″ Pagani Extruder 25:1 Single Screw

Stock #UG6171

1.77″ Pagani Extruder 25:1 Single Screw

1.77″ Pagani Extruder 25:1 Single Screw

Stock #UG6171

Used single screw extruder by Pagani (Italy) type MP 45-25D. Machine has single screw with diameter 45 mm. Machine had been running on PVC. Working rotation of screw in range from 0 to 46 rpm. Machine is driven by 15...

Location: Europe

Get a Quote View Details