We have just refurbished this Anhydro spray dryerwhich is immediately available from our UK warehouse. If you would like to receive a quote or arrange an inspection, please call us on +44(0) 1325 315 111 or send us an email.
Used Refurbished Anhydro Stainless Steel Spray Dryer
Model LAB S1r. Stainless steel chamber measures 1000mm diameter x 700mm straight side x 1100mm high cone bottom. Chamber was previously insulated with mild steel cladding but this has been removed. Includes stainless steel spinning disc atomiser driven by a 0.3kw 220volt 26000 rpm motor. In the height of the drying chamber, where cone starts, there is mounted a spraying nozzle. Unit is mounted on a mild steel frame.
Our in-house engineers carried out the following work:
Removed all cladding and had asbestos professionally removed and decontaminated.
Measured, modeled and re clad unit in 304 Stainless Steel with SL930 50mm thick slabs of thermal insulation rated up to 350OC. (Drawings available)
Supplied and fit new Tetrotemp gauge. (CE Conformity certificate available).
Had control panel professionally re-wired and electrical drawing updated.
Fabricated 8mm thick pads on the frame and welded to unit as well as supplying and mounting new caster wheels.
Supplied OEM consumables such as gaskets, filters and powder bucket outlet.
Re-assembled and fully test ran (see below video).
Please see below some refurbished units we have in stock, immediately available for sale from our UK site.
As part of our service we can refurbish our stock to a high standard to ensure the equipment you buy meets your exact requirements. This is generally carried out at our site in Newton Aycliffe by our team of experienced and qualified process equipment technicians.
To discuss these items or any other equipment requirements, please call us on +44 (0) 1325 315111.
Refurbished Niro Mobile Minor Stainless Steel Laboratory Spray Dryer
Has stainless steel chamber approximately 800mm diameter X 620mm straight side X 700mm Cone bottom. Chamber is lagged and clad. Includes Niro pneumatically operated spinning disc atomizer. Has electrical heater. Maximum inlet temperature approximately 350 degrees Celsius and outlet temperature approximately 120 degrees Celsius. Evaporation rate 1-7 kg/hr depending on product. Mounted on portable stainless steel frame.
Our in-house engineering team carried out the following work:
Electrical rewire.
New light.
New gaskets.
Frame work repaired.
New gauge and other gauges re-calibrated.
New rubber seals for air actuator.
New caster wheels for frame.
Mild steel parts painted.
Motors checked and test ran.
Heating elements rewired.
Re-clad in stainless steel.
New insulation.
Perry can offer a full mechanical refurbishment service on our used process equipment, to ensure the equipment meets your exact specification requirements. We have a team of experienced engineers and workshop facilities at our site in the UK, and where necessary we can send the unit back to the original equipment manufacturer. See some examples of our refurbishment work.
Used Morton Model FM3000 Stainless Steel Jacketed Ploughshare Mixer
Approximately 3000 litre total capacity with an approximate 1400-2100 litre working capacity. Mixing chamber measures approximately 1454mm diameter x 2960mm long. Unit has carbon steel jacket rated 3 bar working pressure. Ploughshare mixing blades belt driven by a 75/55 kW 415 volt 3/50 1460/735 rpm motor via a gearbox. Centre bottom pneumatically operated discharge valve.
Perry can offer a full mechanical refurbishment service on our used process equipment, to ensure the equipment meets your exact specification requirements. We have a team of experienced engineers and workshop facilities at our site in the UK, and where necessary we can send the unit back to the original equipment manufacturer. See some examples of our refurbishment work on our webite.
1,000 litre working capacity based on swept volume of the trough and 1,280 litre total capacity. Mixing trough approximately 798mm wide x 899mm deep x 2000mm long. Single interrupted ribbon direct driven by approximately 15 kW 415 volt 3/50 motor and gearbox. Cantilever design and mounted on stand. Has 2-section hinged lid with counter balance weights. Also has bottom outlet.
Our in-house engineering team carried out the following work:
Strip down
Clean
Paint
Change packing
Change one bearing
Rewire into a direct online starter
View Test Run
Perry can offer a full mechanical refurbishment service on our used process equipment, to ensure the equipment meets your exact specification requirements. We have a team of experienced engineers and workshop facilities at our site in the UK, and where necessary we can send the unit back to the original equipment manufacturer. See some examples of our refurbishment work.
English 
German 
French 
Spanish 
