12" WIDE CUSTOM SINGLE POSITION WINDER. PREV. USED ON BLOWN FILM. 1/4 HP MOTOR 115 VOLTS 3" CORES 20" O.D.

USED 24" WIDE PLACO SINGLE POSITION SURFACE WINDER FOR MAXIMUM 60" DIAMETER ROLLS. PREVIOUSLY USED ON HDPE FILM. INCLUDES DRIVE, DRIVE CONTROL, AND GEARBOX.

USED GLOUCESTER MODEL #163, 3-SPINDLE ROTARY WINDER, SERIAL #18770-31-1975.

USED 32" WORLD WIDE SURFACE WINDER. SERIAL #1256-W. RATED AT APPROXIMATELY 30" DIAMETER REWIND ROLL. 1 HP, 230/460 VOLT GEARHEAD MOTOR.

USED 36" PARKINSON/STERLING 4-SHAFT CANTILEVER WINDER. EACH WINDING STATION IS DRIVEN BY A TORQUE MOTOR RATED AT 140 INCH LBS. WITH NIPS AND INLINE RAZOR SLITTING PROVISION. GOOD FOR UP TO 18" DIAMETE...

USED 39" WIDE LUNGMING MODEL LSVNSWA-1000H SURFACE WINDER WITH AUTO-ROLL CHANGER. WILL ACCOMADATE APPROX 24" OD ROLLS.

USED HELIX SINGLE POSITION 42" WIDE REWIND, GOOD FOR APPROXIMATELY 24" DIAMETER ROLLS. HAS (2) 12" DIAMETER WALDRON HARTIG COOLING ROLLS, 40" WIDE, (1) 3" DIAMETER SHAFT FOR REWINDING, EDGE GUIDE WI...

USED 46" EGAN SINGLE POSITION SURFACE REWIND. GOOD FOR APPROX. 44" DIA. ROLLS. SERIAL #20486. HAS APPROX. 7.5 HP DC DRIVE.

USED 48" WIDE WORLDWIDE 2-POSITION TURRET WINDER, NEW 1990. WILL ACCOMMODATE 42" DIAMETER ROLLS, INCLUDES PANEL MATE, MODICON CONTROL SYSTEM FOR OPERATOR CONTROL, HAS RELIANCE MAX PACK DRIVE CONTROL P...

USED 52" PARKINSON SINGLE TURRET WINDER ABLE TO HANDLE UP TO 24" DIAMETER PACKAGES. UNIT HAS LAY-ON AND AUTO CUT. SERIAL #84-220.

USED 54" WIDE GLOUCESTER MODEL 126 SINGLE TURRET WINDER, SERIAL NUMBER 18009-01. SHAFTLESS DESIGN, WILL ACCOMMODATE 18" DIAMETER ROLLS. BOTH WINDING STATIONS ARE DRIVEN BY A SINGLE DC MOTOR WITH CONT...

USED 54" WIDE PARKINSON 2-POSITION CANTILEVER FOAM SHEET WINDERS. PACKAGE INCLUDES COMMON BASE FOR (2) 54" WIDE CANTILEVER WINDERS UTILIZING 10" CORES FOR MAXIMUM 60"O.D. ROLLS. INCLUDES PULL ROLL S...

USED 66" MAF SINGLE TURRET WINDER FOR MAXIMUM 36" DIAMETER ROLLS. INLCUDES LAY-ON ROLL ASSEMBLY, AUTO-KNIFE CUTOFF, 3" AIR SHAFTS, INCOMING DANCER, SCREW JACK ROLL UNLOADING.

UNUSED 66" WIDE WORLDWIDE TURRET UNWIND, FIXED POSITION REWIND COMBINATION. UNWIND WILL ACCOMMODATE MAXIMUM 36" O.D. ROLLS, 3000 POUND CAPACITY WITH 7-132 POUNDS TENSION. WEB SPEEDS .3-50 FEET PER M...

USED 71" GLOUCESTER MODEL 124 DUAL TURRET WINDER. UNIT HAS SECONDARY NIPS, LAY-ON, DANCER AND SLITTING PROVISION. LAY-ON MEASURES 71", HOWEVER WINDING CAPACITY AND NIPS MEASURE 78". NO AIR SHAFTS I...

USED 72" WIDE APV SINGLE TURRET WINDER. WILL ACCOMMODATE 24" DIAMETER ROLL, HAS FLYING KNIFE CUT OFF HYDRAULICALLY ACTUATED WITH HYDRAULIC PUMPING SYSTEM INCLUDED. HAS LOAD CELL TENSION CONTROL, LAY O...

USED 72" WIDE JOHNSON DUAL TURRET WINDER FOR 18" DIA. ROLLS. HAS DANCER AND LAYON ROLLS, DC DRIVE, (4) 1 1/2" DIA. SHAFTS FOR WINDING BUT WILL RUN SHAFTLESS FOR 3" CORES. REPORTED PREV. USED FOR STR...

USED 82" EGAN SINGLE TURRET WINDER ABLE TO HANDLE UP TO 24" DIAMETER ROLLS ON 3" AIR SHAFTS. UNIT HAS LAY-ON, DANCER, POWER INDEXING AND AUTO CUT. EACH WINDING STATION HAS A 5 HP DC MOTOR.

USED 85" WIDE GLOUCESTER MODEL 106 SINGLE TURRET WINDER. NEW 1975. 460 VOLT AC INPUT. WILL ACCOMMODATE MAXIMUM 60" DIAMETER ROLL.

SET OF 94" GLOUCESTER BACK-TO-BACK SINGLE TURRET WINDERS. WINDERS ARE MODEL 131 AND ARE ABLE TO HANDLE UP TO 24" DIAMETER PACKAGES ON 3" AIR SHAFTS. WITH DANCER AND LAY-ON. ALSO INCLUDED IS A 94" SECO...

USED 96" EGAN SINGLE TURRET DOUBLE DIRECTION WINDER ABLE TO HANDLE UP TO 36" DIAMETER PACKAGES ON EITHER 3" OR 6" AIR SHAFTS. UNIT WAS DESIGNED TO RUN A 92" WIDE WEB, 4.5 TO 45 MILS THICK AT SPEEDS F...

USED 105" PARKINSON MARK II HORIZONTAL SURFACE WINDER FOR 2-PLY, EMBOSSED, LAMINATED TISSUE PAPER. MATERIAL THICKNESS (DRY): 0.5MM (NOMINAL) MATERIAL WIDTH RANGE: 105" MAX./80" MIN. MATERIAL DIAME...

USED 105" PARKINSON SINGLE TURRET WINDER ABLE TO HANDLE UP TO 28" DIAMETER PACKAGES. WINDER OSCILLATES AND HAS LAY-ON AND AUTOCUT. PARKINSON SERIAL #84-224.

USED 120" WIDE BATTENFELD GLOUCESTER "PHANTOM" AXIS SINGLE TURRET WINDER. MODEL 1028S, SERIAL #38000-01. WILL ACCOMODATE UO TO 72" DIAMETER ROLLS. DEIGNED FOR USE ON LOW DENSITY LIGHT GUAGE POLYETHEL...