USED 75 TON SAMCO UP ACTING HYDRAULIC DIE CUTTING PRESS. HAS APPROXIMATELY 20" X 64" PLATEN DIMENSION.

USED 30" X 60" ORMONT MODEL DK, SIZE 17 DIE CUT PRESS. DRIVEN BY 8.5 H.P. 1800 RPM MOTOR TO CHAIN DRIVEN DRIVE SHAFT WITH DOWN ACTING TOP PLATEN. PREVIOUSLY USED ON APPROX. 3" TALL PAPER STACK. TOP...

USED 20 TON SCHON HYDRAULIC, TRAVELING HEAD DIE CUTTING PRESS. HAS 36" X 18" BED SIZE, 14" WIDE HEAD, 2-HAND SAFETY TRIP OPERATOR STATION. 220 VOLT AC INPUT, HEAD AND BED ARE COVERED BY 2" THICK PLANA...

USED 4 POST DIE CUTTING PRESS 44" X 44" TIE BARS, 42" X 72" PLATENS, 10" STROKE, 12" DAYLIGHT WITHOUT PLATENS. DAYLIGHT WITH PLATENS 5 1/2". 50 TON CAPACITY.

USED SHERWOOD MODEL 42IN TYP HSB HORIZONTAL DIE CUTTER. APPROXIMATELY 21.5" X 43" CUTTING WINDOW. 4-POST DESIGN PLATEN. HAS BCS MOTION CONTROLS AND MAGPOWER CYGNUS WEB TENSION. SERVO DRIVEN.

USED IIJIMA MODEL BF-1270 CUTTER/CREASER. MAXIMUM SHEET SIZE 940MM X 1270MM. MINIMUM SHEET SIZE 465MM X 728MM. MAXIMUM CUTTING SIZE 920MM X 1250MM. MAXIMUM THICKNESS OF CARDBOARD B-FLUTE 2MM. REPORTED...

USED HERMAN SCHWABE MODEL SR-230 HYDRAULIC DIE CUTTING PRESS. PLATENS MEASURE 40" WIDE X 80" LONG. DOWNACTING PRESS IS RATED AT 230 TONS. 20" DIAMETER MAIN RAM WITH FOUR APPROXIMATE 8" DIAMETER GUIDE...

USED HUDSON 4-POST DIE CUTTING PRESS RATED AT 75 TON OF FORCE. 50" X 100" PLATENS. DOWNACTING TYPE WITH CONTROL PANEL. NO HYDRAULIC PUMP. SERIAL NUMBER 31873. 480/3/60.