USED LAWSON MODEL 3040 MUSTANG SCREEN PRODUCTS FLAT BED PRESS. APPROXIMATELY 48" WIDE X 33" DEEP TABLE. HAS FOOT PEDAL CONTROL.120 VOLT. PRICE INCLUDES A 15% BUYER PREMIUM.

USED 30 TON PHI LABORATORY HYDRAULIC PRESS. HAS 12" X 12" ELECTRICALLY HEATED PLATENS, WATER COOLED. INCLUDES HYDRAULIC PUMP, 480 VOLT, (2) EUROTHERM 808 INSTRUMENTS. 8" OF DAYLIGHT BETWEEN PLATENS...

USED 30 TON PHI PRESS, MODEL O-24011. UP ACTING, 12.5" X 10.5" PLATENS. ELECTRICALLY HEATED, 6KW HEATERS, 240 VOLT. HAND PUMP. SERIAL #7600.

Little used press for work with dissolver made by PROFARB. Press is hydraulic driven with working with power 37 tons. Designed for work with mixing cans with volume 500 litres and dimensions - diamete...

USED PHI MODEL 50-333-C-X-MS-Y24 SLAB SIDE LAB PRESS RATED AT 50 TONS CAPACITY. UP ACTING RAM. THREE 12.5" X 12.5" ELECTRICALLY HEATED, WATER COOLED PLATENS. TWO OPENINGS. 1.5 HP HYDRAULIC PUMP. UPDAT...

USED WABASH 75 TON UPSTROKE SELF-CONTAINED HYDRAULIC MOLDING PRESS, MODEL 75-1818-5STM. 4-POST TYPE, FLOOR STANDING. DISTANCE BETWEEN 2" DIAMETER POST 22-1/2" LEFT TO RIGHT X 12" FRONT TO BACK. PLATEN...

USED WABASH PRESS MODEL 75-2026-SM. 75 TON COMPRESSION MOLDING PRESS. 8" CYLINDER WITH 20" STROKE. 20" LR X 26" FB TIE BAR. 29" X 31" PLATENS, 5 DAYLIGHTS, APPROX. 4 1/2". SELF CONTAINED HYDRAULIC...

USED 80 TON FEDERAL STRAIGHT SIDE SINGLE CRANK PRESS HAVING AN AIR CLUTCH AND BRAKE WITH AIR COUNTER BALANCES. BACK GEARED TYPE PRESS WITH CAM BOTTOM EJECTION SYSTEM. UNIT HAS 6" STROKE, 15" SHUT HEIG...

UNUSED HYDRAULIC PRESSER YUKEN TYPE YUPEC 100 MADE BY YUKEN (ENGLAND). MODEL YUPEC 100 HYDRAULIC PRESS RATED AT 100 TONS CAPACITY HAVING AN UPACTING RAM. POWER OF THE TOP ROLLER 7 - 100 TONS. REVERSE...

Used hydraulic press for plastic materials, type PH-M 100c. Manufactured by "TARNOBRZESKA FABRYKA OBRABIAREK" (Poland). Working force of pressing 100 tons. Working return force 43 tons. Piston stroke ...

USED PAIR OF PHI 100 TON CAPACITY HOT/COOL PRESSES. MODEL 2100R-1818S-2HCS-L-X-X, SERIAL NUMBER 89-11-009. MFD. 1989. EACH PRESS HAS TWO(2) 18" X 18" ELECTRICALLY HEATED, WATER COOLED PLATENS. FOU...

USED FRENCH OIL MODEL Q-100 HYDRAULIC PRESS. UNIT HAS (10) OPENINGS, PLATENS MEASURE 28" FRONT TO BACK X 48" DEEP. PLATENS ARE ELECRICALLY HEATED WATER COOLED. UNIT IS MOUNTED IN A PIT WHICH IS APPR...

USED 100 TON LAWERENCE UP ACTING HYDRAULIC PRESS. 5" DIAMETER TIE RODS WITH 68" X 29" PLATEN. APPROXIMATELY 35" DAYLIGHT. 16" X 70" BETWEEN THE TIE RODS. SERIAL NUMBER 3385. LAST USED AS DIE CUTTE...

USED 170 TON BALDWIN 4 POST UPACTING HYDRAULIC PRESS. HAS 45" DAY- LIGHT, 24" STROKE. HAS SLOTTED BOLSTERS, 30" X 24" WITH 35" X 14" BETWEEN TIE BARS. 12" DIA. RAM AND HYDRAULIC PUMPING SYSTEM RATE...

USED 350 TON ERIE TON HYDRAULIC LAMINATING PRESS. PRESS CONSISTS OF 35" LR X 36" NOMINAL PLATEN AREA, 35" LR X 22" FB BETWEEN 5" DIAMETER POSTS. PLATEN ELECTRICALLY HEATED, UP ACTING DESIGN WITH 16"...

USED 400 TON FRENCH OIL UPSTROKE HYDRAULIC MOLDING PRESS. HAS 44" LEFT TO RIGHT BETWEEN THE SLABS, 44" LEFT TO RIGHT X 36" PLATEN AREA (NOMINAL). 0-16" STROKE, 36" MAXIMUM DAYLIGHT (TOTAL). 24" MAI...

USED 650 TON ERIE SLAB SIDE UPSTROKE HYDRAULIC PRESS. NEW 1991. DISTANCE BETWEEN SLAB SIDES 40" LEFT TO RIGHT. PLATEN AREA IS 36" LEFT TO RIGHT X 32" FRONT TO BACK. STROKE OF GIB GUIDED PLATEN 0-16.5"...

USED 1500 TON SIMPLEKAMP 4 POST, UPACTING LAMINATING PRESS. HAS 32" X 64" PLATENS, 80MM DAYLIGHT BETWEEN EACH PLATEN (3.1"), WITH EACH PLATEN 40MM THICK (1.57"). HAS 800MM RAM DIA. (31").

USED 5000 TONS HYDRAULIC PRESS. HAS A 65” X 121” PLATEN DIMENSIONS (17) WITH 100 M DAYLIGHT. HEATING TEMPERATURE UP TO 180 DEG.C AND COOLING TEMPERATURE 20 DEG.C. MAXIMUM EXPOSURE TIME UNDER PRESSURE ...