USED APPROXIMATELY 4" DIAMETER X 36" LONG STAINLESS STEEL TWIN SCREW DEWATERING PRESS. SCREWS OVER AND UNDER DESIGN. BELT DRIVEN BY 7.5 KW 410 VOLT 3/50 960 RPM MOTOR VIA RENOLD GEARBOX. HAS STAINLESS...

USED ANDRITZ-DUPPS MODEL 3620 DEWATERING SCREW PRESS WITH FALK GEAR BOX, MOTOR, CONTROL PANEL. PRODUCTION 205 ADMPTD OR 184.5 BDMPTO, PER PRESS OR 410 ADMTPD FOR TWO PRESSES. INLET CONSISTENCY 4.0% BD...

USED ANDRITZ-DUPPS MODEL 3620 DEWATERING SCREW PRESS WITH FALK GEAR BOX, MOTOR, CONTROL PANEL. PRODUCTION 205 ADMPTD OR 184.5 BDMPTO, PER PRESS OR 410 ADMTPD FOR TWO PRESSES. INLET CONSISTENCY 4.0% BD...

USED ANDRITZ DUPPS MODEL 3624 SLUDGE PRESS. REPORTED NEW IN 2000. EXCELLENT CONDITION WITH FALK MODEL 2177YN4-S GEARBOX. RATIO 772-1 WITH 50 HP MOTOR. DESIGN CRITERIA SLUDGE TYPE NEWSPRINT BL...

RECONDITIONED BELOIT JONES MDL P-100 PRESSMASTER, TYPE 2510. PRESS COMPLETE WITH VIBRATORY SHAKER DISCHARGE. UNIT HAS T316 STAINLESS STEEL CONTACT PARTS. WITH NEW LINER SCREENS, NEW MAIN DRIVE BEAR...

USED BELOIT JONES MODEL P-325 STAINLESS STEEL VERTICAL SCREW PRESS.

USED BLACK-CLAWSON SINGLE SCREW HYDRADENSER EXTRACTOR. 16" DIAMETER X 6' LONG. 20 HP V-BELT DRIVE. 3/60/230-460 VOLT, 1775 RPM MOTOR. CONNECTED TO A FALK REDUCER, 25.7:1 RATIO.

USED BLACK-CLAWSON SINGLE SCREW HYDRADENSER EXTRACTOR. (1) 16" DIAMETER X 6' LONG SCREW. WITH A FALK REDUCER.

USED BLACK CLAWSON MODEL 1-B-16 INCLINED SCREW HYDRADENSER. HAS (1) 16" DIAMETER INCLINED SCREW. STAINLESS STEEL CONSTRUCTION. THICKENS UP TO APPROXIMATELY 12% - 15% DEPENDING ON USE. PREVIOUSLY U...

USED MODEL 1-B-16 SINGLE SCREW HYDRADENSER MANUFACTURED BY IHI UNDER LICENSE BY BLACK CLAWSON. 56 ADTPD, 1.6% INLET CONSISTENCY, 12-14% OUTLET CONSISTENCY.304 STAINLESS STEEL CONSTRUCTION. S/N HD-68. ...

NEW CHRISTINA SCREW PRESS. (1) 10" DIAMETER SCREW X 16' LONG. STAINLESS STEEL CONSTRUCTION, SCREW, INLET BASKET, BAR FILTER, DRAIN PAN, DISCHARGE CHUTE, AND COVERS. HYDRAULIC DRIVE FOR SCREW. MA...

USED CHISHOLML-RYDER STAINLESS STEEL SINGLE SCREW DEWATERING PRESS. 5" DIA. X 12" LONG SCREW WITH TAPERED SHAFT, FLIGHTS ON 3" PITCH, POLISHED SURFACES. REINFORCED SCREEN CYLINDER WITH APPROX. 1/32" ...

USED ERWEPA 9" INCLINED SCREW THICKENER. STAINLESS STEEL. WITH MOTOR.

USED ERWEPA 9" INCLINED SCREW THICKENER. STAINLESS STEEL. WITH MOTOR.

USED 14" DIAMETER FRENCH OIL DEWATERING PRESS PREVIOUSLY USED FOR LDPE PULPED MILK CARTON STOCK DEWATERING. 14" O.D. SCREW, 110" LONG. NEW APPROXIMATELY 1978. BELT DRIVEN BY A 400 HP AC MOTOR SUPPLYIN...

USED GULF MACHINERY CO CARBON STEEL VERTICAL SCREW PRESS. 30" DIAMETER. EQUIPPED WITH 30 HP HYDRAULIC DRIVE.

USED GULF MACHINERY CO. CARBON STEEL VERTICAL SCREW PRESS. 30" DIAMETER. EQUIPPED WITH 30 HP HYDRAULIC DRIVES

USED GULF MACHINERY CO CARBON STEEL VERTICAL SCREW PRESS. 30" DIAMETER. EQUIPPED WITH 30 HP HYDRAULIC DRIVES

USED GULF MACHINERY CO CARBON STEEL VERTICAL SCREW PRESS. 30" DIAMETER. EQUIPPED WITH 30 HP HYDRAULIC DRIVE.

USED HOOPER HYDRAINER PULP WATER EXTRACTOR. 304 S/S. SCREW 9" DIAMETER X 5'6" LONG. RATED FOR 57 ADT/D @ 700 C.S.F. USED TO DEWATER REJECTS FROM JONNSEN SCREEN. ALSO TO THICKEN STOCK AHEAD DISC R...

USED HOOPER HYDRAINER PULP WATER EXTRACTOR. 304 STAINLESS STEEL. 9" DIAMETER X 5'6" LONG SCREW. RATED FOR 57 ADT/D @ 700 C.S.F. USED TO DEWATER REJECTS FROM JONSSON SCREEN. ALSO TO THICKEN STOCK AHEAD...

USED LAMORT-BAKER M-16, 16" INCLINED SCREW THICKENER. HAS 16" OD X 86" LENGTH. 14" X 25" FEED AND DISCHARGE OPENING. STAINLESS STEEL CONTACT PARTS. WITH 18.5KW, 380 VOLT, 50HZ MOTOR.

USED LAMORT-BAKER M-16, 16" INCLINED SCREW THICKENER. HAS 16" OD X 86" LENGTH. 14" X 25" FEED AND DISCHARGE OPENING. STAINLESS STEEL CONTACT PARTS. WITH 18.5KW, 380 VOLT, 50HZ MOTOR.

USED LAMORT-BAKER M-16, 16" INCLINED SCREW THICKENER. HAS 16" OD X 86" LENGTH. 14" X 25" FEED AND DISCHARGE OPENING. STAINLESS STEEL CONTACT PARTS. WITH 18.5KW, 380 VOLT, 50HZ MOTOR.

USED PULP PRESS MADE BY LEONHERDT (GERMANY), MODEL L 500 S DESIGNED TO PROCESS FRUIT. ALL CONTACT PARTS ARE SS.

USED NEYRTEC SCREW PRESS.

USED RIETZ RSP-16-K2 STAINLESS STEEL SCREW PRESS. WITH 20 HP DRIVE THROUGH GEARBOX. PREVIOUSLY USED IN FRUIT PROCESSING OPERATION.

USED RICE BARTON TRIPLE SCREW STAINLESS STEEL WATER EXTRACTOR/THICKENER. 7.5 HP, 3/60. 575 VOLT TOSHIBA MOTOR. THREE (3) 9" SCREWS. NO TOP COVER.

USED RICE BARTON MODEL 616503-A TRIPLE SCREW EXTRACTOR. DRIVEN BY THREE 7 1/2 HP, 1800 RPM MOTORS. ALSO AVAILABLE SEPERATELY IS A SINGLE SCREW UNIT. WITH HOPPERS AND PIPING. EACH SCREW DRIVEN BY A...

USED RIETZ MODEL RSP-16-K2 16" HORIZONTAL SCREW PRESS. STAINLESS STEEL PRODUCT CONTACT. THE PRESS IS EQUIPPED WITH A 20 HP VARI-SPEED MAIN DRIVE.

USED RIETZ TYPE HORIZONTAL STAINLESS STEEL SINGLE SCREW DEWATERING PRESS. 16" DIAMETER X 9' LONG. 6-1/1" X 16" INLET. 6" CENTER BOTTOM OUTLET. LINK BELT PARALLEL SHAFT REDUCER AND 40 HP 3/60/220 V...

USED STORD MODEL RS49 DEWATERING PRESS. DRIVEN BY 60 HP, 3 PHASE, 60 CYCLE, 480 VOLT MOTOR.

USED STORD MODEL BS41FK TWIN SCREW PRESS. 12" DIAMETER X 10' LONG SCREWS. CARBON STEEL CONSTRUCTION. WITH HEAVY DUTY MAIN CAGE AND BACK UP SCREEN. DRIVEN BY 40 HP DRIVE THROUGH REDUCER. SCREW ROTATE C...

USED STORD MODEL BS-64S DOUBLE SPINDLE DEWATERING PRESS. STAINLESS STEEL CLAD SPINDLES. STAINLESS STEEL BACKING PLATES AND SCREENS.

USED STORD TYPE BS64S DOUBLE SPINDLE HORIZONTAL DEWATERING PRESS. SPINDLES, BACKING PLATES, COVER AND SCREENS ARE STAINLESS STEEL. WITH 108:1 RATIO GEARBOS. LAST USED ON SUGAR BEETS.

USED PULP PRESS STORD RS64SW

USED STORD RS68 PULP PRESS. SUBJECT TO FINAL RELEASE BY THE OWNER.

USED THUNE MODEL SP45L SCREW PRESS.

USED THUNE MODEL SP45L SCREW PRESS. WITH 75 HP 575 VOLT MOTOR AND FALK 10.96:1 RATIO GEARBOX.

USED THUNE MODEL SP70L ELECTRICALLY DRIVEN SCREW PRESS.

USED THUNE MODEL SP70L HYDRAULIC DRIVEN SCREW PRESS.

REPORTEDLY UNUSED VERTICAL PRESS DEWATERING SCREW TYPE, 500 T/DAY MADE BY MACHINOFABRIK ZANGERHAUSEN (GERMANY). SCREW 0 800 MM, 30,4 KW.

USED VINCENT MODEL PR-16K2 STAINLESS STEEL SCREW PRESS. WITH MAIN DRIVE THRU GEARBOX. ALSO INCLUDES CONE DRIVE THRU GEARBOX. PREVIOUSLY USED IN FRUIT PROCESSING OPERATION.

USED ZENITH CO. VERTICAL SCREW DEWATERING PRESS. STAINLESS STEEL PRODUCT CONTACTS. 24" DIA. X 75" HIGH (DEWATERING AREA) SCREW. DRIVEN BY 40 HP MOTOR.