USED SOLIDS TECHNOLOGY LTD 1M WIDE DOUBLE BELT FILTER TYPE S-103, SERIES 3/1000 MARK 2. APPROX. CAPACITY 5CUMT PER HOUR FROM 1.5% D.S. INPUT TO 16% D.S.OUTPUT. GALVANISED FRAME, STAINLESS STEEL ROLL...

USED PHOENIX EQUIPMENT COMPANY 1.2 METER WIDE SLUDGE PRESS EQUIPPED WITH 3 HP DRIVE MOTOR, 3 PHASE, 60 CYCLE, 230/460 VOLT CONTROL PANEL, 7.5 HP FEED PUMP, 1 HP AIR COMPRESSOR, 10 HP AURA C/S PUMP. ON...

Used belt press by AMOS type APEX 1600. Press has working width of belts 1500 mm. Reported output on fruits up to 14 tons/hour. Working speed of belt in range from 0-11 m/min. Shipping dimensions: wid...

USED ROEDIGER 1.5 M WIDE BELT PRESS.

USED SALTEC (SWEDEN) DEWATERING SYSTEM INCLUDING BELT PRESS MODEL HP 2.20 AND PRE-WATERING MODULE RF 9-2. PRE-WATERING MODULE IS MOUNTED ON PRESS. SLUDGE WATER IS MOVED TO TWO ROTATING SCREEN-DRUMS, E...

USED 2200MM WIDE ANDRITZ BELT PRESS MODEL CPF 2/1 SMXP. MILD STEEL FRAME, RUBBER COVERED ROLLERS IN DECENT CONDITION, GALVANISED BOTTOM TRAY. MAIN DRIVE IS VIA ELECTRIC MOTOR THROUGH A GEARBOX TO A CH...

REFURBISHED DRAVO 2.0 METER WIDE GRAVITY FILTER BELT PRESS. TRAILER MOUNTED, INCLUDES NEW TIRES, BEARINGS, HUBS, FLOCK SYSTEM WITH NEW MIXERS, NEW BELTS NEW CYLINDERS, SHAFTS, ROLLERS, NEW BELT WASHI...

Used ENSINK belt press for mechanical dewatering. Has two belts with working width 2 m. Press has stainless steel and polypropylene rolls. Driven by an electric motor with gear box. Pressing section o...

USED KOMLINE SANDERSON 2 METER WIDE UNIMAT BELT FILTER PRESS, 48 GPM, 75 PSIG. 21'-6 9/16" LONG. 586 SQ. FT. OF DEWATERING AREA. 304 STAINLESS STEEL AND CARBON STEEL CONSTRUCTION. WITH CONTROLS.

Used belt press by KLEIN model FP2 designed for work on fruits. Working width of belt 2000 mm. Reported output in range 8-20 tons per hour. Includes control panel. Polish translation: Używana prasa t...

REBUILT 2.0 M WIDE KLIEN SLUDGE (WIRE) PRESS 30 TPD. FULLY REBUILT TO ORIGINAL FACTORY SPECIFICATIONS AND OFFERED WITH A REBUILDER'S LIMITED WARRANTY.

USED 2.1 METER HYMAC/KVAERNER TWIN WIRE BELT PRESS. REPORTED NEW 1993. MODEL 80MSL WITH PRESSURIZED HEADBOX. BELT 316 STAINLESS STEEL DESIGN WITH STATIC FOILS, S-ROLLS, (2) SHOWERS, 75 HP, RATED AT 15...

USED ARUS ANDRITZ 2.2 METER S7 TRAILER MOUNTED BELT PRESS SYSTEM. EPOXY COATED STEEL FRAME. EXTRA HEAVY DUTY DESIGN FOR HIGH THRU-PUT AND HIGH CAKE SOLIDS. 460 VOLT, 3 PHASE MOTOR. HYDRADYNE HYDRAULIC...

USED ARUS ANDRITZ 2.2 METER S7 TRAILER MOUNTED BELT PRESS SYSTEM. EPOXY COATED STEEL FRAME. EXTRA HEAVY DUTY DESIGN FOR HIGH THRU-PUT AND HIGH CAKE SOLIDS. 460 VOLT, 3 PHASE MOTOR. HYDRADYNE HYDRAULIC...

Used belt dewatering belt system by BELLMER type WINKELPRESSE model WNP-I 3X. Working width of belt 2200 mm. Length of belt: top belt 22930 mm, bottom belt 19820 mm. Working belt speed range from 0.9 ...

USED VERTI-PRESS EF FILTER, 25 SQUARE FEET (2.3 SQUARE METER) FILTRA SYSTEM MODEL VP-25-1-(2). STAINLESS STEEL, AUTOMIZED PLC SMART PANEL, SEMI-BATCH OPERATION. DIAPHRAGM SQUEEZING 100 PSI CAN PRODUCE...

USED 2.5 METER ROEDIGER BELT PRESS. CARBON STEEL CONSTRUCTION. CHAIN DRIVEN BY 1.6/2 HP, 475/2275 VOLT DRIVE. OUTPUT 2.7/13.5 MM. 166:1 RATIO. TYPE SSP25.3. MODEL 25.324. BUILT 1985.

MANUFACTURED NEW, ANDRITZ DESIGN TWIN WIRE BELT PRESS AND DISCHARGE SCREW. TECHNICAL SPECIFICATIONS AS FOLLOWS: SIZE : 2800 WITH A DESIGN CAPACITY OF 300 BDT/D, AT A FREENESS OF 250–300 CSF (CANADI...

USED INFILCO DEGREMONT INC. 3 METER BELT PRESS. POLYPROPYLENE DRUM WITH A 8" DIA. STEEL MOYNO PUMP, TYPE CDQ, FRAME 1G0HS1, FORM MD, WITH 10 HP VARISPEED DRIVE.

USED 3.5 METER HYMAC MDL #SF-031MS TWIN WIRE BELT PRESS. NEW APPROXIMATELY 1980. LAST RUN IN 2003. REMOVED AND OUT OF SERVICE. REPORTED TO BE IN GOOD CONDITION.