 | USED APPROXIMATELY 15 TON VANDORN INJECTION MOLDER. NO TEMPERATURE PANEL INCLUDED. HAS 10" X 6.5" TIE BAR CLEARANCE, HORIZONTAL CLAMP INCLUDING HYDRAULIC PUMPING SYSTEM. |
|---|
 | USED 17 TON BATTENFELD HYDRAULIC INJECTION MOLDER, NEW 1991. MODEL BA150CDC PLUS. HAS 13" X 12.75" PLATENS, 7.25" X 6" TIE BAR CLEARANCE. HAS 1.2 OUNCE SHOT SIZE AND INCLUDES BATTENFELD UNILOG 4000 SO... |
|---|
 | USED BOY MODEL 22A INJECTION MOLDING MACHINE HAVING A 22 TON CLAMPING FORCE WITH APPROXIMATELY A 1 OUNCE INJECTION CAPACITY. NO PROGRAMMER INCLUDED. 230 VOLT. MANUFACTURED IN 2000. SERIAL #39054. ... |
|---|
 | USED BOY MODEL 22S INJECTION MOLDING MACHINE HAVING A 22 TON CLAMP FORCE AND APPROXIMATELY A 1 OUNCE SHOT CAPACITY. UNIT HAS A HORIZONTAL INJECT WITH A VERTICAL CLAMP. SERIAL #22269. 220 VOLT, 3 PH... |
|---|
 | Used injection molder by ENGEL model ES 80/25 HLS. Clamping force 25 tons, injection weight 41 gram. Machine has a table without a bars. Computer control type EC88. Power consumption 11.4 kW. Machine ... |
|---|
 | USED INJECTION MOLDER BY BATTENFELD MODEL 300/100, CLAMPING FORCE 30TONS, MAX OPENING 400MM, TIE BAR DISTANCE 254MM X 254MM AND PLATES DIMENSIONS 400MM X 400MM. MACHINE NEW 1985, CONTROL PANEL UNILOG ... |
|---|
 | USED INJECTION MOLDER BY KUASY, MODEL 105/32; CLOSING FORCE 32 TONS; INJECTION SIZE 105 CM3;
DISTANCE BETWEEN TIE BAR 280MM X 280MM; MAX OPENING STROKE 220MM; MACHINE DIMESSIONS 3.63X1.05X1.8M;
POWE... |
|---|
 | Used injection molder by ARBURG type 221-75-350 with clamping force 35 tons and injection weight 59 grams. Tie bar distance 221 mm x 221 mm. Mechanical closure. Electronic controls Polytronica. Machin... |
|---|
 | USED 40 TON ARBURG MODEL 221M ALL ROUNDER. HAS 2.08 OUNCE SHOT SIZE, 8.7" X 10" MAXIMUM MOLD SIZE, MAXIMUM MOLD HEIGHT 5.9", EJECTOR STROKE 2.36". 230 VOLT AC INPUT (CONVERTED TO 600 VOLT FOR USE OF T... |
|---|
 | Used injection molder by KLOCKNER FERROMATIK type FX40 with clamping force 40 tons and injection weight 60 grams. Tie bar distance 320 mm x 320 mm. Hydraulic closure. Computer control. Machine new 199... |
|---|
| USED 44 TON BATTENFELD HYDRAULIC INJECTION MOLDER. NEW 1995. HAS 1.9 OUNCE SHOT, 19.25" X 19.25" PLATENS, 12.5" X 12.5" TIE BAR CLEARANCE. INJECTION MOLDER MODEL BA400CDC, INCLUDES BATTENFELD UNILOG 4... |
|---|
 | USED 44 TON BATTENFELD HYDRAULIC INJECTION MOLDER. NEW 1999. HAS 1.9 OUNCE SHOT, 19.25" X 19.25" PLATENS, 12.5" X 12.5" TIE BAR CLEARANCE. INJECTION MOLDER MODEL BA400/125CDC. INCLUDES BATTENFELD UNIL... |
|---|
 | USED 50 TON BATTENFELD INJECTION MOLDER, NEW 1992. MODEL BA500CDPLUS. 3.2 OUNCE (90 GRAM) SHOT SIZE. HAS HYDRAULIC CLAMP, UNILOG 4000 CONTROL, SERIAL #A50105/09/2119 14737. 230/460 VOLT, 3 PHASE, 60 ... |
|---|
| USED 55 TON VAN DORN INJECTION MOLDING MACHINE. 3.5 OZ. SHOT CAPACITY. 18" X 17" PLATEN, 12 1/8" X 10 1/8" TIE BAR CLEARANCE, 7" MINIMUM DAYLIGHT, 20" MAXIMUM DAYLIGHT, HYDRAULIC CLAMP. HAS HYDRAULIC ... |
|---|
| USED INJECTION MOLDER BY KUASY, MODEL 170/55; CLOSING FORCE 55 TONS;
INJECTION SIZE 170 CM3; DISTANCE BETWEEN TIE BAR 320X320MM;MAX OPENING STROKE 250MM;
MACHINE DIMESSIONS 3980 X 1100 X 2050; POWER 1... |
|---|
 | USED INJECTION MOLDER BY BATTENFELD MODEL 750/300, INJECTION SIZE 245CM3, CLAMPING FORCE 75TON, SCREW DIAMETER 50MM, LD RATIO 14.4. INJECTION PRESSURE 1212BAR, INJECTION SIZE (ON PS/PE) 223G/174G MAX ... |
|---|
 | USED 77 TON ARBURG ALL ROUNDER INJECTION MOLDING MACHINE. MODEL 305-210-700. HAS APPROXIMATELY 5 OUNCE SHOT CAPACITY, 5.5" X 12" TIE BAR CLEARANCE. NEW 1983. |
|---|
| Used injection molder by MIR model RMP 90. Machine new 1996. Power installed 20 kW. Closing force 90 tons, with maximal injection volume 192 cm3. Machine has screw with diameter 45 mm. Tie bar distanc... |
|---|
 | Used injection molder by ENGEL model ES 600/100. Machine is equipped with screw diameter 40 mm. Injection volume 251 cm3 at pressure 1800 bar. Tie bar distance 420 mm x 420 mm. Maximal distance betwee... |
|---|
