USED DRAIS MODEL PM 5 TEX-H STAINLESS STEEL HORIZONTAL BEAD MILL. APPROXIMATELY 5 LITRE CAPACITY.STAINLESS STEEL JACKETED CHAMBER APPROXIMATELY 145 MM DIAMETER X 370 MM LONG. STAINLESS STEEL ROTOR DRI...

USED DRAIS MODEL PM1 STS STAINLESS STEEL VERTICAL BEAD MILL. 1.3 LITRE STAINLESS STEEL JACKETED VERTICAL CHAMBER. ROTOR DRIVEN BY 3.6 KW 415 VOLT 3/50 VARIABLE SPEED MOTOR. INCLUDES PUMP DRIVEN BY 0.1...

USED WILLY BACHOFEN MODEL KDL-EX STAINLESS STEEL HORIZONTAL DYNOMILL. HAS TWO STAINLESS STEEL JACKETED GRINDING CHAMBERS. SMALLER CHAMBER APPROXIMATELY 0.15 LITRE CAPACITY WITH DIMENSIONS 75MM DIAMETE...

USED WILLY BACHOFEN MODEL KDL HORIZONTAL LABORATORY DYNOMILL. HAS TWO GLASS GRINDING CHAMBERS, PLASTIC ROTOR, STAINLESS STEEL ROTOR AND VARIOUS GRIDING MEDIA.

USED VERTICAL CO-BALL MILL MANUFACTURED BY FRYMA MODEL MSM-50. CAPACITY 6 LITRES, HOUSING SIZE 520 MM (D) X 300 MM. INCLUDES MECHANICAL SEAL AND JACKET. ROTOR IS JACKETED AND COATED. DRIVEN BY A 37 KW...

USED FRYMA MODEL MODEL MS-50 TYPE 1.4034 (AISI 420F) STAINLESS STEEL CO-BALL MILL. GRINDING CHAMBER 8 LITRE CAPACITY RATED 2.5 BAR DESIGN PRESSURE AT 80 DEGC. JACKET 13.1 LITRE CAPACITY RATED 4 BAR DE...

USED DRAIS TYPE PMH-25-TEX/NF PERLMILL. 25 LITER CAPACITY. RATED 3 PSI/45 PSI @ 70°F/158°F INTERNAL. JACKET RATED 3 PSI/45 PSI @ 40°F/104°F. BUILT 2007.

USED NETZCH MODEL LMJ15 GRINDING MEDIA MILL HORIZONTAL. EQUIPPED WITH 25 HP VARI-SPEED BELT DRIVE. 3/60/230 VOLTS. START/STOP CONTROL BUTTONS. NEW 1980

USED NETZSCH MODEL LME05 HORIZONTAL LAB MEDIA MILL. 0.5 LITER CAPACITY.JACKETED CHAMBER.JOHN STYLE ROTOR(PEG). DRIVEN BY A 5 HP MOTOR.UNIT ON BASE WITH MECHANICAL SEAL LUBRICATOR AND PERISTALIC PUMP.

USED NETZSCH MODEL LME I/II HORIZONTAL STAINLESS STEEL MEDIA MILL. 4" DIAMETER X 9" LONG JACKETED CHAMBER. 1 LITER CAPACITY. DRIVEN BY MANUAL VARI-SPEED MOTOR.

USED PREMIER VERTICAL MEDIA MILL MODEL 30RS. 75 HP 3/60/460 VOLT EXPLOSION PROOF MOTOR AND STARTER. MECHANICAL SEALS FOR PRESSURIZED USE. INCLUDES 3 HP 2" VARIABLE SPEED FEED PUMP.

USED SCHOLD 10" SHOT MILL (SAND MILL) WITH 30 HP MOTOR; 1040 RPM. SERIAL #607077. LOOKS GOOD. 1982.

USED SCHOLD 12" SHOT MILL. 75 HP MOTOR, 2900 RPM.

USED SCHOLD 8" SHOT MILL (SAND MILL). SERIAL #5891-75. WITH 25 HP DRIVE.

USED 50L NAGEMA (GERMANY) MODEL 192B-TD-1 SAND BALL MILL FOR PAINTS AND VARNISHES. RATES UP TO 750 L/H. CONTINUOUS LOADING BY GEAR PUMP. MOTOR 18,3 KW. DIMENIONS 1600 MM L X 740 MM W X 2250 MM H. ...

USED EIGER MOTORMILL ABML-75 STAINLESS STEEL LABORATORY BEAD MILL. .75 LITER CHAMBER. BATCH OR RECICULATION GRINDING. WITH DRIVE IN SELF-CONTAINED HOUSING, FEED HOPPER, AND PUMP.

USED NETZSCH MODEL LME05/JOR WET GRINDING MILL. EQUIPPED WITH A 3 HP DRIVE. BUILT 1984. APPROXIMATELY .5 LITER TOTAL CAPACITY. PHOTOS IN FILE.

USED NETZSCH COMPANY WET GRINDING/FLUID ENERGY MILL, MODEL 576.26RM, VERTICAL JACKETED CHAMBER, 25 HP DRIVE MOTOR.

Used Drais Mill Ball & Pebble PML V+H, stainless steel ultrafine wet grinding laboratory model. Has 1,2 liter capacity, 3bar, 70°C, jacket 0,1 liter capacity, 3bar, 70°C, S/S product chamber, perforat...

USED CO-BALL MILL MADE BY FRYMA (SWITZERLAND) MODEL MSM-32. MILLING CHAMBER HAS 3.4 LITRES VOLUME. UNIT IS DRIVEN BY 22 KW/50HZ EX MOTOR. MILL IS EQUIPPED WITH SCREW NETZSCH FEEDING PUMP FOR HIGH DENS...

Used co-ball mill by FRYMA (SWITZERLAND) model MSM-32. Milling chamber has 3.4 l. working volume. Machine is driven by electric motor with power 22 kW/50 hZ/EX design. Mill is equipped with Netzsch fe...

USED NAGEMA, MODEL 192 AK, APPROXIMATELY 5 LITRE CAPACITY CARBON STEEL BEAD MILL. WITH JACKET CHAMBER WATER COOLED. INCLUDED 2X SPARE JACKETED CHAMBER AND 1X SPARE SHAFT. CZECH TRANSLATION: POUŽITÝ PE...

USED NETSZCH MODEL LME-4-DCMS STAINLESS STEEL HORIZONTAL MEDIA MILL, 4 LITER STAINLESS STEEL GRINDING CHAMBER WITH STAINLESS STEEL JACKET, TRINEX STYLE AGITATOR, MECHANICAL SEALS, WITH DYNAMIC CARTRID...

USED NETZSCH MODEL LME 4 HORIZONTAL STAINLESS STEEL BEAD MILL. 4 LITRE CAPACITY. STAINLESS STEEL JACKETED CHAMBER, WATER COOLED. MECHANICAL SEAL ON THE SHAFT. FEED PUMP INCLUDING.

USED NETZSCH MODEL LME 4 HORIZONTAL STAINLESS STEEL BEAD MILL. 4 LITRE CAPACITY. STAINLESS STEEL JACKETED CHAMBER, WATER COOLED. MECHANICAL SEAL ON THE SHAFT. EL. MOTOR 3,6KW/3PH/50Hz/400V/ EX PROOF, ...

ONE (1) USED PREMIER STAINLESS STEEL HORIZONTAL JACKETED BEAD MEDIA MILL. MODEL HM-5. 5 LITER CAPACITY. 8-40 GAL/HR PUMP OUTPUT. 20 HP MAIN DRIVE. 1-1/2 HP VARIABLE SPEED PUMP. INCLUDES CONTROL P...

USED DRAISWERKE 1 LITER CAPACITY STAINLESS STEEL CONTINUOUS MEDIA MILL, MODEL TS1000, USED VERY LITTLE, BUILT 1993, MOUNTED ON CART WITH CONTROLS, DRIVEN BY 5 HP MOTOR, HI INTENSITY EXPLOSION PROOF MI...

USED PREMIER MODEL QM10 10 LITER MEDIA MILL. 460 VOLT. BUILT 2001.

RECONDITIONED AND UNUSED 2 GAL. PREMIER MEDIA SAND MILL. STAINLESS STEEL CONTACT PARTS WITH CERAMIC BEADS. MODEL #2-RSS. WITH MECHANICAL SEAL. BELT DRIVEN WITH 10 HP 740 RPM 3/60/230-460V DRIVE.

USED EIGER MODEL 2L-M-VSE-EXP MOTORMILL LABORATORY BEAD MILL, 2 LITER JACKETED CHAMBER, STAINLESS STEEL CONSTRUCTION, CAN BE USED FOR BATCH OR RECIRCULATION GRINDING, WITH 3.75 KW, 3/60/230 VOLT, EXPL...

VERY LITTLE USED VERTICAL SAND MILL MADE BY TETRA PLUS (CZECH REPUBLIC) MODEL PM 10. 10 LITRE CAPACITY OF WATER COOLED CYLINDRICAL MIXING CHAMBER. CHAMBER MEASURES 190 MM DIAMETER X 460 MM HEIGHT, CAR...

USED NETSZCH MODEL LMC-20-EDCMS HORIZONTAL MEDIA MILL. 20 LITER JACKETED GRINDING CHAMBER. WITH MOLINEX GRINDING DISCS. DRIVEN BY A 25 HP VARI-SPEED DRIVE.

REFURBISHED VERTICAL STAINLESS STEEL SAND MILL MADE BY NETZSCH TYPE KE-20S. MILLING CHAMBER HAS WORKING VOLUME 20 LTR. MACHINE IS DRIVEN BY 18.5 KW ELECTRIC MOTOR.

USED DRAIS MODEL PMH 25 TEX HORIZONTAL AGITATED MEDIA PERL MILL. 25 LITER WORKING CAPACITY, 30 LITER TOTAL CAPACITY. 22 KW DRIVE, 3/60/460 VOLT.

USED PROCHEM (CZECH REPUBLIC) MODEL SPD 30-EX HORIZONTAL BEAD MILL. STAINLESS STEEL JACKETED WATER COOLED CHAMBER HAS CAPACITY 30 LITRE. MECHANICAL SEAL ON THE SHAFT. MACHINE IS DRIVEN BY 18,5 KW ELEC...

USED CHICAGO BOILER MODEL 8P RED HEAD SAND MILL. SERIAL #72-E-1232-1. DRIVEN BY A 15 HP 3/60/230-460 VOLT MOTOR. COMPLETE WITH STERLING SPEED - TROL AND PUMP. MOUNTED ON BASE.

USED EIGER TORRANCE MODEL 40L-SSE-TFV APPROXIMATELY 40 LITRE CAPACITY STAINLESS STEEL BEAD MILL. STAINLESS STEEL CHAMBER MEASURES APPROXIMATELY 650MM LONG X 400MM DIAMETER. UNIT IS DRIVEN BY 30KW, 415...

USED NETZSCH MODEL LME HORIZONTAL MOLINEX FINE GRINDING MILL. 50 LITER GRINDING CHAMBER CAPACITY.

Used horizontal sand mill manufactured by PROFARB (Poland) type EHP-50. Contact parts designed in stainless steel. Machine has milling chamber with volume 50 l. Mill is driven by motor 45 kW ex-proof ...

USED NETZSCH MODEL LMC60(E) GRINDING MEDIA MILL. 57 LITER CHAMBER CAPACITY. 50 HP MAIN DRIVE. BUILT 1994. S/N: 205-135

USED NETZSCH MODEL LMC60 (E) GRINDING MEDIA MILL. 57 LITER CHAMBER CAPACITY. 50 HP MAIN DRIVE. BUILT 1990. S/N: 205-143

USED VERTICAL SAND MILL BY KOFAMA, MODEL MK60S. MILLING CHAMBER HAS TOTAL VOLUME 60 LITRES. MACHINE HAS REPORTED CAPACITY PER HOUR DEPENDING ON PRODUCT 120-700 LITRES/HOUR. TEMPERATURE RANGE OF WORK -...

Used horizontal sand mill by Willy A. Bachofen AG – Maschinenfabrik (Switzerland) Typ KD-60. Milling chamber has working volume 60 l. Mill driven by 37 kW el. motor. Included control panel. Transport ...

USED VERTICAL CARBON STEEL SAND MILL MADE BY TETRA PLUS (CZECH REPUBLIC) MODEL PM 70. 70 LITRE CAPACITY OF GRINDING CYLINDRICAL CHAMBER. DRIVEN BY EL. MOTOR 22kW/3PH/380V/50Hz. CARBON STEEL STAND. INC...

Used horizontal sand mill manufactured by PROFARB (Poland) type EHP-100. Contact parts designed in stainless steel. Machine has milling chamber with volume 100 l. Mill is driven by motor 55 kW ex-proo...

USED VERTICAL CARBON STEEL SAND MILL MADE BY TETRA PLUS (CZECH REPUBLIC) MODEL PM 140. 140 LITRE CAPACITY OF GRINDING CYLINDRICAL CHAMBER. CARBON STEEL STAND. INCLUDES VARISPEED TEETH PUMP.

USED EIGER MODEL M50-MSE-EXP "MINI" MOTORMILL LABORATORY BEAD MILL, 50ML JACKETED CHAMBER, STAINLESS STEEL CONSTRUCTION. CAN BE USED FOR BATCH OR RECIRCULATION GRINDING. WITH .75KW, 3/60/2309 VOLT, ...

Used co-ball mill made by FRYMA (Switzerland) model MSZ-18. Milling chamber has volume 1.1 ltr. Machine is driven by electric motor with power 10 kW. Milling parts are designed in stainless steel. Po...