UNUSED CALIFORNIA PELLET MILL MODEL 7000 PELLET DIE. HAS 3MM DIAMETER HOLES AND 60MM THICK. DIE SERIAL NUMBER 79994.

USED CALIFORNIA PELLET MILL CPM CENTURY WITH 150HP 1770RPM MOTOR AND DRIVE, VARIABLE SPEED FEEDER, CONDITIONER WITH INDEPENDENT DRIVE, (2) ROLLERS, DIE CLAMPS AND (1) 16" 3/32 DIE

REPORTEDLY NEW DIE FOR CALIFORNIA PELLET MILL MODEL 7000 PELLET MILL. APPROXIMATELY 152.4MM (6") FACE X 558MM (22") DIAMETER X 80MM THICK WITH 3MM DIAMETER HOLES.

REPORTEDLY NEW DIE FOR CALIFORNIA PELLET MILL MODEL 7000 PELLET MILL. APPROXIMATELY 152.4MM (6") FACE X 558MM (22") DIAMETER X 40MM THICK WITH 5MM DIAMETER HOLES.

DIE FOR CALIFORNIA PELLET MILL MODEL 7000 PELLET MILL. APPROXIMATELY 152.4MM (6") FACE X 558MM (22") DIAMETER X 100MM THICK WITH 3MM DIAMETER HOLES.

USED DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

USED DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

USED DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

USED DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

USED DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

DIE FOR CALIFORNIA PELLET MILL MODEL 7726 PELLET MILL. APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 60MM THICK WITH 3MM DIAMETER HOLES.

USED PELLET DIE CLAMP RING FOR CPM7000 MODEL PELLET MILL.

REPORTEDLY UNUSED STAINLESS STEEL DOOR FOR CALIFORNIA PELLET MILL MODEL 7000 PELET MILL.

USED VARIOUS ROLLERS FOR CPM 7000 PELLET MILL.

USED PELLET MILL PRESSA ESSICATRICE TYP 100MADE BY BS BOLLARETO IMPIANTI (ITALY). DRIVEN BY EL. MOTOR 45KW/50Hz/380V.INCLUDES HORIZONTAL SCREW FEEDER DRIVEN BY EL. MOTOR. KAPACITY 600KG/HOUR, CONTROL ...

USED PALADIN PELLET MILL TYPE 600B. DIE INSIDE DIAMETER 600MM. TWO ROLLS DIAMETER APPROX. 135MM, DRIVEN BY 2X EL. MOTOR AEG 55KW/1475RPM/50Hz/380V.INCLUDES HORIZONTAL SCREW FEEDER DRIVEN BY EL. MOTOR ...

LITTLE USED PALADIN PELLET MILL MODEL 600B. DIE INSIDE DIAMETER 600 MM. THREE PRESS ROLLS TYPE, EACH DIAMETER 248 MM. DRIVEN BY (2) EL. MOTOR AEG 55KW/1475RPM/50Hz/380V. INCLUDES HORIZONTAL PADDLE FEE...

USED TMS PELLET MILL TYPE TL 700 MADE BY TMS PERDUBICE (CZECH REPUBLIC). DIE INSIDE DIAMETER 700MM. FOUR ROLLS DIAMETER APPROX. 250MM, DRIVEN BY EL. MOTOR 75KW/985RPM/50Hz/380V.

USED CALIFORNIA PELLET MILL, BELT DRIVEN TO 90 KW SINGLE SPEED MOTOR. 1400 RPM 380 VOLT HAS 18" DIAMETER X 5" DIE WITH .24" DIAMETER POLLS.

USED BLISS INDUSTRIES PIONEER SERIES MODEL B-120A-141 PELLET MILL HAVING TWO(2) 75 HP MOTORS. DIE INSIDE DIAMETER IS 25-11/16". DIE SPEED IS 140-154 RPM. TRACK SPEED IS 943/1036 FEET PER MINUTE. UNIT ...

USED CPM 2-ROLL PELLET MILL WITH 2 HP VARISPEED STAINLESS STEEL FEEDER. 15 HP CARBON STEEL PADDLE MIXER. 3/8" HOLES ON DIE. 3 PHASE, 60 CYCLE, 460 VOLT, 200 HP MAIN DRIVE. 5/16" HOLES, 28" DIAMETER 6"...

USED CALIFORNIA PELLET MILL, MODEL 7000. TYPE 7122-2. UNIT HAS APPROXIMATELY 177.8MM (7") FACE X 558MM (22") DIAMETER DIE WITH APPROXIMATELY 5MM DIAMETER HOLES. HAS APPROXIMATELY 177.8MM (7") FACE X...

USED CALIFORNIA PELLET MILL, MODEL 7000. TYPE 7122-2. UNIT HAS APPROXIMATELY 177.8MM (7") FACE X 558MM (22") DIAMETER X 100MM (4") THICK DIE WITH APPROXIMATELY 3MM DIAMETER HOLES. HAS APPROXIMATELY 17...

USED CPM MODEL 8000-W TWO ROLL PELLET MILL. DIE DIAMETER 800 MM. ROLLS DRIVEN BY ABB EL. MOTOR 50Hz/3PH/500V/334A/250kW AT 1490RPM. INCLUDED ALL ACCESSORY LIKE A CONTROLS, SCREW FEEDER, CONDITIONING C...

USED CALIFORNIA PELLET MILL MODEL 7000 PELLET MILL. TYPE 7122-2. UNIT HAS APPROXIMATELY 177.8MM (7") FACE X 558MM (22") DIAMETER DIE WITH APPROXIMATELY 5MM DIAMETER HOLES. HAS APPROXIMATELY 177.8MM (7...

USED CALIFORNIA PELLET MILL MODEL 7700 PELLET MILL. TYPE 7726-7. UNIT HAS APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 50MM (2") THICK DIE WITH APPROXIMATELY 3MM DIAMETER HOLES. HAS APPROX...

USED CALIFORNIA PELLET MILL MODEL 7726-7 PELLET MILL. TYPE 26-7. UNIT HAS APPROXIMATELY 177.8MM (7") FACE X 660MM (26") DIAMETER X 50MM (2") THICK DIE WITH APPROXIMATELY 3MM DIAMETER HOLES. HAS APPROX...

Used Pellet presses, AMANDUS-Kahl make,type Z-45-1250, for 9 Ton/h capacity on beet pulp, driven by gear-motor.