USED ALPINE MODEL B-160 UPZ STAINLESS STEEL MILL. 160MM DIAMETER ROTOR DRIVEN BY 5 KW 500 VOLT 3/50 VARIABLE SPEED MOTOR AT MAXIMUM 14500 RPM. INCLUDES PLATE BEATER AND SWING BEATER ROTORS. ALSO INCLU...

USED ALPINE MODEL 250-Y STAINLESS STEEL PIN MILL. HAS 250MM DIAMETER ROTOR DRIVEN BY 6.5 KW 380 VOLT 3/50 MOTOR AT MAXIMUM 3000 RPM. MOUNTED ON BASE AND INCLUDES FEED HOPPER.

RECONDITIONED ALPINE MODEL 250-Z STAINLESS STEEL KOLLOPLEX STUD MILL. HAS 250MM DIAMETER ROTOR DRIVEN BY 15 KW 400/690 3/50 MOTOR AT MAXIMUM APPROXIMATELY 12600 RPM. INCLUDES PRESSURE TIGHT STAINLESS ...

USED ALPINE TYPE 250CW CARBON STEEL CONTRAPLEX WIDE CHAMBER WIDE CHAMBER STUD MILL. HAS (2) 250MM DIAMETER CONTRA ROTATING DISCS. DRIVEN BY 7.5 KW & 15 KW 500 VOLT 3/50 MOTORS. BODY APPROXIMATELY 1130...

USED ALPINE TYPE 250CWS PIN DISC MILL. HAS 250MM DIAMETER CONTRA ROTATING DISCS WITH (1) ROW PINS. DOES NOT INCLUDE MOTORS. BODY APPROXIMATELY 1130MM DIAMETER X 180MM DEEP.

REFURBISHED ALPINE MODEL 315 UPZ UNIVERSAL MILL. HOUSING MADE OF CAST IRON. INCLUDES MILLING TOOLS, PLATE BEATER WITH SCREEN BASEKT. DRIVEN BY A 18.5KW MOTOR.

USED ALPINE MODEL 315 UPZ CARBON STEEL MILL. HAS APPROXIMATELY 315MM DIAMETER PLATE BEATER SYSTEM WITH STATIONARY RIBBED BAFFLE GRINDING TRACK. BEATER PLATE IS BELT DRIVEN BY 18.5 KW 220/380 VOLT 3/50...

USED ALPINE GRINDING FACILITY. COMPRISES ALPINE MODEL 500 UP MILL. HAS 500MM DIAMETER ROTOR DRIVEN BY 37KW MOTOR. INCLUDES ALPINE MODEL 40 MR REVERSE JET DUST COLLECTOR 32 SQMT FILTRATION AREA. ALPINE...

USED ALPINE MODEL 710 CW CARBON STEEL CONTRAPLEX MILL. WIDE CHAMBER HOUSING WITH 710MM DIAMETER ROTOR DRIVEN BY 75 KW 380 VOLT 3/50 MOTOR AT MAXIMUM 3150 RPM. DOOR MOUNTED 710MM DIAMETER ROTOR DRIVEN ...

USED ALPINE MODEL 400 CW CAST IRON CONTRAPLEX MILL. HAS (2) 400MM DIAMETER ROTORS. HOUSING ROTOR BELT DRIVEN BY 40 HP (30KW) 3/50/380/660 VOLT 2980 RPM MOTOR. DOOR ROTOR BELT DRIVEN BY 14HP (11KW) 3/5...

LITTLE USED CARBON STEEL CLASSIFIER MANUFACTURED BY ALPINE HOSOKAWA TYPE MPS 400. INCLUDES NEW 3-PHASE 15KW 400V 50HZ MOTOR WITH V-BELT PULLEY ON THE MOTOR, THE CLASSIFIER PADDELS ARE MANUFACTURED OUT...

USED ALPINE TYPE A100P COLLOIDAL MILL. S/N 144731. SINGLE 4" DIA. ROTOR WITH (6) BEATERS 2" DEEP. INCLUDES STAINLESS STEEL VIBRATING FEED TYPE ER1 3" WIDE X 16" LONG. DRIVEN BY A 0.37 KW, 2750 RPM...

RECONDITIONED ALPINE MODEL 63/50 HA OMNIPLEX STAINLESS STEEL HAMMER MILL. GRINDING CHAMBER 630 MM DIAMETER X 500 MM WIDE. HAS ROTOR APPROXIMATELY 610MM DIAMETER X 460MM WIDE. INCLUDES (2) ROWS OF (10)...

USED APV BAKER MILL. OUTSIDE DIAMETER APPROX 1.2 METRES. LINED IN CERAMIC BRICKS. AVERAGE USAGE APPROX 9 HOURS PER WEEK. LAST USED TO GRING PEPTONES, SODIUM CHLORIDE AND AGAR.

USED BAUERMEISTER MODEL HR 42 TURBO MILL. HAS APPROXIMATELY 800MM DIAMETER X 220MM DEEP TURBO ROTOR AND RING SIEVE. BELT DRIVEN BY 37 KW 380 VOLT 3/50 1460 RPM MOTOR AT APPROXIMATELY 2800 RPM. MOUNTED...

USED BAUERMEISTER MODEL UT 22 CARBON STEEL UNIVERSAL MILL. HAS 450MM DIAMETER TURBO MILL WITH SIEVE CAGE. DRIVEN BY 18.5 KW 400/690 VOLT 3/50 MOTOR. MAXIMUM ROTOR SPEED APPROXIMATELY 5150 RPM. HAS APP...

USED BAUERMEISTER MODEL UT 23 CARBON STEEL UNIVERSAL MILL. HAS 450MM DIAMETER TURBO MILL WITH (2) SIEVE CAGES. PRESSURE PROOF 3 BAR. DRIVEN BY 22KW 380/660 VOLT MOTOR. MAXIMUM ROTOR SPEED APPROXIMATEL...

REFURBISHED BAUERMEISTER TYPE UZU 13 IMPACT MILL. HAS AN APPROXIMATE THROUGHPUT RATE OF UP TO 1000 KG/HR DEPENDING ON PRODUCT AND INITIAL GRAIN SIZE. OUTPUT GRAIN SIZE 0.5MM. DRIVEN BY A 11KW MOTOR.

USED GRELBEX MODEL BOP 3 CARBON STEEL CENTRIFUGAL GRINDING MILL. HAS 480 MM DIAMETER ROTOR WITH (7) PERCUSSION HAMMERS AND (4) COLLECTING HAMMERS. BELT DRIVEN AT 3000 RPM BY 30 HP 380 VOLT 3/50 3000 R...

USED HOSOKAWA MICRON MODEL FM2 STAINLESS STEEL HAMMER MILL. GRINDING CHAMBER 280 MM DIAMETER X 300 MM WIDE. HAS (4) ROWS OF (8) HAMMERS. BELT DRIVEN BY APPROX. 5.5 KW MOTOR. INCLUDES STAINLESS STEEL H...

USED KEK MODEL 120 STAINLESS STEEL CONE MILL.INCLUDES NITROGEN PURGE SYSTEM AND ELECTRICAL PANEL. UNIT MOUNTED ON MOBILE STAINLESS STEEL TROLLEY.

Used Kek model 220 hastelloy cone mill. Has approximately 220mm diameter X 120mm deep conical screen. 2-blade rotor belt driven by approximately 4 kw 220/415 volt 3/50 motor shrouded with stainless st...

USED KEK MODEL 4H STAINLESS STEEL TURBO MILL. HAS APPROXIMATELY 250MM DIAMETER STAINLESS STEEL TURBO ROTOR WITH (16) HORIZONTAL BARS. HAS SIEVE RING WITH (3) GRINDING JAWS AND APPROXIMATELY 2MM SCREEN...

NEW MAC 400 DOUBLE DRIVEN CARBON STEEL PIN MILL. TWO COUNTER ROTATING WHEELS. THE WHEEL ON THE MACHINE SIDE IS DRIVEN BY INVERTER (NOT INCLUDED). THE ROTATING WHEEL ON THE MILL SIDE IS 304 STAINLESS S...

USED PALLMANN (GERMANY) MODEL PP6S STAINLESS STEEL PULVERIZING TURBO MILL. APPROXIMATELY 600MM DIAMETER STAINLESS STEEL ROTOR/PLATE. EQUIPED WITH A WATER COOLED SCREENLESS COUNTER-ROTATING PULVERIZING...

USED TURBO CONE MILL MANUFACTURED BY PALLMANN TYPE REF 6. HAS A ROTOR SIZE OF 600MM DIAMETER AND AN INLET OF 185MM X 185MM. DRIVEN BY A 30KW, 380 VOLT, 2850 RPM MOTOR. MOUNTED ON A FRAME AND INCLUDES ...

USED SILVERSON MODEL 275L STAINLESS STEEL IN-LINE MIXER. REMOVABLE FRONT FACE PLATE. DIRECT DRIVEN BY 1.5 KW, 3 PHASE, 220-440 VOLT MOTOR. MOUNTED ON PORTABLE STAINLESS STEEL TROLLEY WITH CASTERS. STO...

USED ALPINE MODEL 100 ATP TURBOPLEX ULTRAFINE CLASSIFYING SYSTEM. SYSTEM CONSISTS OF: 1) INLET FEEDER 2) ALPINE MODEL 100 ATP STAINLESS STEEL TURBOPLEX CLASSIFIER WITH CHANGEABLE RPM´S 900-9000 3) STA...

USED ALPINE MODEL D100LU UNIVERSAL GRINDING MILL. MAXIMUM THROUGHPUT APPROXIMATELY 30-40 KG/H. ALUMINIUM HOUSING WITH CAST IRON WEAR PROOF CHROME STEEL BEATER SYSTEMS. GRINDING CHAMBER 105 MM, BEATER...

Used SS (316TI) pin mill by Alpine model 160 UPZ. Machine has one moving milling plate, all contact parts are made of stainless steel. Machine is driven by a 5.5 kW, 2950 rpm,380 volts, 11 amp, 50 Hz....

USED ALPINE MODEL 160 UPZ STAINLESS STEEL MILLING SYSTEM. 160MM DIAMETER PLATE BEATER ROTOR DRIVEN BY 5,9/6,0kW 380 VOLT 3/50 EL. MOTOR AT MAXIMUM 14250 RPM. NITROGEN PURGED DESIGN. INCLUDES K-TRON MO...

USED ALPINE TYPE A 250 CW PIN DISC MILL WITH CONTRA ROTATING DISCS, STAINLESS STEEL INSIDE CLADED. HAS (2) 250 MM DIAMETER ROTATING DISCS DRIVEN BY 2 EL MOTOR,50HZ. HAS A FEEDER.

USED ALPINE CRYOGENIC GRINDING SYSTEM. ALPINE CONTRAPLEX MODEL 250CW MILL. 304 STAINLESS STEEL PRODUCT CONTACT SURFACES WITH CAST IRON FRACTURE RESISTANT HOUSING. 20 HP, 230/460 VOLT MAIN DRIVE, 15 HP...

USED ALPINE MODEL B 315 P CARBON STEEL IMPACT MILL. BEATER DISC ROTOR DIAMETER 315 MM WITH SOLID CAMS ROTATES WITH 5000 RPM MAX. HAS CARBON STEEL HOPPER WITH VIBRATORY FEEDER.

USED ALPINE MODEL 50 APT TURBOPLEX ULTRAFINE CLASSIFIER STAINLESS STEEL . FEEDER, CONVEYOR, CLASSIFIER, SLEEVE FILTER, CONTROL PANEL AND FAN. COMPLETE SYSTEM MOUNTED ON FRAMEWORK.

USED ALPINE CONTRAPLEX PIN MILL TYPE A250CW. MAXIMUM SPEEDS OF DRIVE SHAFTS-HOUSING 2800 RPM, DOOR 5600 RPM, 10 HP, 230/460 VOLT, 3 PHASE, 855 LBS

Used stainless steel pin mill by ALPINE model 250Z. Mill has stainless steel vibrating feeder with magnetic separator. Rotor belt driven works with rotation speed 2 500 rpm. Lack of pedestal with disc...

Used powder classifier by ALPINE (Germany) type A400 MP. Machine is carbon steel design. Rotor works with rotation speed 2300 rpm and is belt driven by electric motor with power 15 kW. Machine is equi...

USED STAINLESS STEEL CONTACTS ALPINE PIN MILL TYPE 250Z. MAX. 12000 RPM.

USED UNION PROCESS SIZE Q1 BATCH ATTRITOR STAINLESS STEEL, EQUIPPED WITH 11.2/5.6 KW 230/460/3 MOTOR.

USED UNION PROCESS SIZE Q50 BATCH ATTRITOR. STAINLESS STEEL. VARI- DRIVE MOTOR. MINIMUM RPM 600, MAXIMUM 1200. CONE DRIVE RATIO 5:1. MOTOR IS 60 HP 3/60/230-460V. 56 GALLON GRINDING TANK CAPACITY...

USED SZEGVARI ATTRITOR BLADES.

USED SZEGVARI ATTRITOR, MODEL 100S, STAINLESS STEEL CONSTRUCTION. 128 GALLON GRINDING CAPACITY. 60 TO 80 GALLONS DELIVERED CAPACITY, JACKETED BOWL. 20 HP EXPLOSION PROOF MOTOR. ON BASE.

USED UNION PROCESS SZEGVARI TYPE 1S, SIZE B STAINLESS STEEL ATTRITOR. 7.5" X 7.5" CARBON STEEL JACKETED GRINDING CHAMBER. CARBON STEEL SHAFT WITH PINS. DRIVEN BY 2 HP, 3 PHASE, 60 CYCLE, 230/460 VOLT,...

USED UNION PROCESS-SZEGVARI MODEL Q-50 ATTRITOR MILL. APPROXIMATELY 50 GALLON STAINLESS STEEL MIXING CHAMBER, CHAMBER IS APPROXIMATELY 24" X 27" DEEP. CARBON STEEL JACKET. AGITATOR ARM DRIVEN THROUG...

USED BAUERMEISTER UNIVERSAL LAB MILL MODEL ULD. 316 STAINLESS STEEL CONSTRUCTION. PIN MILL DESIGN. 1.5 HP, 18000 RPM, 3 PHASE, 60 HZ, 220 VOLT, 18000 RPM TEFC MOTOR. WITH VIBRATING FEEDER. 120 M/SECON...

USED BAUERMEISTER MODEL UT13 UNIVERSAL MILL. 20 HP, 3520 RPM. WITH FARR DUST COLLECTOR AND DISCHARGE CONVEYOR. SKID MOUNTED.

UNUSED BUHLER CALYPSO MODEL 1250 GRINDING MILL RATED FROM 1500-3300 KG PER HOUR OF FILTER GROUND WITH COMPACTING SCREW AND CONTROLS.

USED CARBON STEEL PIN MILL CONDUX, TYPE CST 250/G, ROTOR DIAMETER 250 MM. HAS A FEEDER WITH DRIVE UNIT. MAX. SPEED OF PINNED DISC 12 OO0PRM. MAX. CAPACITY UP TO 120 KG/HOUR DEPENDING ON INLET PRODUCT....

USED KEMUTEC KEK 220 CONE MILL. ON PORTABLE BASE. 5 HP, 460 VOLT, 1700 RPM. BELT DRIVE, WITH (2) SPARE BELTS.

USED MODEL 75 L.H. EXP GRINDING MILL MANUFACTURED BY EIGER MACHINERY. 75 LITER CHAMBER CAPACITY WITH VARIABLE SPEED 75 HP 3/60/230-460 VOLT MOTOR. SERIAL NUMBER 583.

USED FITZPATRICK HIGH SPEED GRINDING MILL MODEL DA50-6. ALL WETTED PARTS BEING STAINLESS STEEL. EQUIPPED WITH A 10 HP, V-BELT DRIVE, WATER COOLED OUTBOARD BEARINGS, AND MODEL 575 HALF MOON SHAPED BL...

USED GLEN MILLS LABORATORY GRANULATOR/PULVERIZER. TYPE SK1, SERIAL #60777. UNIT CONSISTS OF A 3-KNIFE ROTOR MOUNTED DIRECTLY ON A 1.1 KW 3440 RPM MOTOR. FIXED BLADES ARE MOUNTED ON THE FRONT OF THE...

USED TMS (CZECH REPUBLIC) GRINDER, TYP MK 15 KL, HAS 500MM DIAMETER ROTOR DRIVEN BY EL. MOTOR 11 KW/50 HZ/400V. MAX. ROTOR ROTATION SPEED 2910 RPM. UNIT IS MONTED ON CARBON STEEL CONSTRUCTION. NEW 199...

USED TMS (CZECH REPUBLIC) GRINDER, TYP MK 60 M, HAS ROTOR DRIVEN BY EL. MOTOR 75 KW/50 HZ/400V. MAX. ROTOR ROTATION SPEED 2920 RPM. UNIT IS MONTED ON CARBON STEEL CONSTRUCTION. NEW 1993.

USED TMS (CZECH REPUBLIC) GRINDER, TYP MK 60 M, HAS ROTOR DRIVEN BY EL. MOTOR 75 KW/50 HZ/400V. MAX. ROTOR ROTATION SPEED 2920 RPM. UNIT IS MONTED ON CARBON STEEL CONSTRUCTION. NEW 1993.

UNUSED HOSOKAWA MODEL FP-7 FINE PULVERIZING MILL, MECHANICAL AIR CLASSIFYING MILL WITH SEPARATE GRINDING AND SEPARATING FUNCTIONS. SWING STIRRUP GRINDING HAMMERS, MECH. AIR CLASSIFIER, DESIGNED FOR 60...

JACOBSON AIR-SWEPT PULVERIZER MODEL 28-HA. ALL STAINLESS STEEL CONTACT SURFACES WITH POLISHED FINISH. 31" DIAMETER GRINDING CHAMBER. BELT DRIVEN BY 75 HP "DUTY MASTER" MOTOR BY RELIANCE, 3 PHASE 230/4...

USED MAJAC MODEL 12-10 JET MILL. CERAMIC TILE AND URETHANE LINED. WITH LAMSON 1250 SERIES BLOWER, CLASSIFIER, 2600 SQ FT. MIKRO-PUL DUST COLLECTOR AND FEEDER. PREVIOUSLY USED ON FUSED SILICON.

USED MAJAC SIZE 4 JET MILL. WITH 1" NOZZLE. LAST PRODUCED APPROXIMATELY 5,000 - 8,500 #/HR. WITH (1) NOZZLE. WITH AIR SEPARATOR, FAN, NO. 15A DYNACLONE DUST COLLECTOR AND CYCLONE. WAS LAST USED W...

USED MAJAC SIZE 4 JET MILL. WITH 1" NOZZLE. LAST PRODUCED APPROXIMATELY 5,000 - 8,500 #/HR WITH AIR SEPARATOR, FAN, NO 15A DYNACLONE DUST COLLECTOR AND CYCLONE. WAS LAST USED WITH A 300 HP AIR COMP...

REPORTED UNUSED KEK MODEL 340, 316 STAINLESS STEEL CONE MILL. BELT DRIVEN BY 7.5KW 380-420/660-690 VOLT 3/50 WITH 1450RPM MOTOR. HAS DISCHARGE CHUTE FOR WET GRINDING. MOUNTED ON STAINLESS STEEL FRAME ...

USED WATER COOLED STONE DISC MILL MADE IN GERMANY BY KORUMA TYPE 2 A/G. UNIT DRIVEN DIRECTLY BY ELECTRIC MOTOR 11 KW/ 2910 RPM/ 380 VOLTS/ 50 HZ MAIN DRIVE. INCLUDES STAINLESS STEEL HOPPER WITH SCREW ...

USED LB BOHLE MODEL BTS100 STAINLESS STEEL CONE MILL. VARIABLE SPEED DRIVE, 230 VOLT. NEW 2002. PRICE INCLUDES 15% BUYERS PREMIUM.

USED MIKROJET JET MILL SYSTEM CONSISTING OF: PALLET FEED HOPPER WITH SURGE BIN. STAINLESS STEEL ACRISON FEEDER. FLUID ENERGY JET MILL 24". DESIGNED FOR SUBMICRON GRINDING. MILD STEEL. RATED 1500 ...

Used mill by SPOMASZ (POLAND). Output depends on material and can reach 30-50 kg/h. Mill is driven by electric motor with power 5 kW. Milling elements are designed for work on spices and herbs (cuttin...

Little used universal turbo mill by NETZSCH-CONDUX type CUM 680. Designed in carbon still. Working diamter of rotor 680 mm. Working rotation speed up to 3100 rpm. Machine is driven by electric motor 7...

USED NETZSCH HORIZONTAL SHOT (PIN) MILL. 50 HP EXPLOSION PROOF MOTOR, 230/460 VOLT. 33 LITER CAPACITY. MODEL LMJ33.

USED PALLMAN DUAL DRIVE PELLETIZER WITH APPROXIMATELY 50 HP AND 20 HP MOTORS. EACH MOTOR IS BELT DRIVEN.

USED PALLMAN MODEL PFV250/20S AGGLOMERATOR. USED FOR RECYCLING LIGHT WEIGHT MATERIAL SUCH AS FILM OR FOAM.BUILT IN GERMANY 1994.

USED PALLMANN MODEL PP8 MILD STEEL TURBO MILL. 800 MM DIAMETER OF TURBO ROTOR. CASING IS WATER COOLED. INCLUDES CYCLONE AND FAN. PREVIOUSLY USED ON PE GRANULES.

Used CS pin mill model MUT 250 made by "Zaklady Urzadzen Chemicznych Rudki k/Kielc". Capacity about 600 kg/hour. High speed plate: 10 kw, 2930 rpm; low speed plate 5,5 kw 2900 rpm. New 1986. Tranwsla...

USED STAINLESS STEEL PIN MILL MADE BY PREROVSKE STROJIRNY (CZECH REPUBLIC) TYPE MMO 280. STAINLESS STEEL ROTOR DIAMETER 280 MM DRIVEN BY EL. MOTOR 3PH/380V/50Hz/4kW WITH 4450 RPM. MAX. CAPACITY UP TO ...

UNUSED STAINLESS STEEL PIN MILL MADE BY PREROVSKE STROJIRNY (CZECH REPUBLIC) TYPE MMO 280. STAINLESS STEEL ROTOR DIAMETER 280 MM DRIVEN BY EL. MOTOR 3PH/380V/50Hz/4kW WITH 4450 RPM. MAX. CAPACITY UP T...

LITTLE USED STAINLESS STEEL PIN MILL MADE BY PREROVSKE STROJIRNY (CZECH REPUBLIC) TYPE MMO 280. STAINLESS STEEL ROTOR DIAMETER 280 MM DRIVEN BY EL. MOTOR 3PH/380V/50Hz/4kW WITH 4450 RPM. HAS A FEEDER ...

USED REIMELT MODEL P ZUCKER/BEH SUGAR GRIND SYSTEM. 6000# PER HOUR. INCLUDING MILL; (1) STAINLESS CONE BOTTOM HOPPER, 6' DIAMETER X 10' STRAIGHT SIDE + 3' CONE; (1) STAINLESS CONE BOTTOM HOPPER, 5' DI...

USED ROBBINS & MEYERS VERTICAL MAZ-O-RATOR MODEL 10VPX. RATED 190 GPM FLOW WITH 5% SLUDGE OR 300 GPM RAW SEWAGE. 10 HP MOYNO PUMP, TYPE CDQ10. ON COMMON BASE.

USED ROSS HORIZONTAL SHOT MILL. 40 HP EXPLOSION PROOF MOTOR. 40 LITER CAPACITY. MODEL UM-45. USED LESS THAN 100 HOURS. BUILT 1993.

USED FULLER TRAYLOR 23.3 DIAMETER X 8'10.5" LONG SAG MILL. GENERAL ELECTRIC 1509 KW, 3 PHASE, 50 HERTZ, 230 RPM MOTOR. 12.13 RPM MILL SPEED. INCLUDES NEW SPARE PINION, AIR CLUTCH, GEAR GUARD, FARVAL G...

USED SHULTZ O'NEIL MODEL 16WJ AIR SWEPT PULVERIZER, NEW 30 HP MOTOR. 1 HP VARI SPEED SCREW FEEDER, NEW MOTOR AND CONTROLLER. STAINLESS STEEL HOPPER.

REPORTEDLY UNUSED SINGLE TRACK JET MILL MADE BY "SEISHIN ENTERPRISE CORP.LTD" JAPAN, MOD. STJ-315-W WITH TUNGSTEN CARBIDE LINER EQUIPPED WITH SCREW COMPRESSOR, MOD.KST37AC, MICRON CLASSIFIER MODEL SPE...

UNUSED CARBON STEEL UNIVERSAL MILL MADE BY PREROVSKE STROJIRNY (CZECH REPUBLIC) TYPE MMU 450.CARBON STEEL ROTOR DIAMETER 450 MM. HAS A FEEDER WITH DRIVE UNIT. MAX. CAPACITY UP TO 450 KG/HOUR DEPENDING...

USED WEDCO GRINDING SYSTEM. MODEL SE-12-TC 2525, SERIAL #6110-0791. UNIT CONSISTS OF (2) MODEL SE-12 PULVERIZERS MOUNTED ON A SINGLE STAND, EACH WITH A 25 HP MOTOR. PACKAGE INCLUDES BLOWER, CYCLONE,...