USED KILLION LABORATORY CAST UNIT HAVING AN 8" X 8" DIAMETER CHROME PLATED ROLL. MOUNTED ON SAME FRAME IS A PULL ROLL STAND CONSISTING OF (2) 8" FACE X NOMINAL 5" DIAMETER PULL ROLLS. TOP ROLL IS RUBB...

USED APPROXIMATELY 27" WIDE FOAM SHEET EXTRUSION LINE PREVIOUSLY USED FOR DECORATIVE RIBBONS, PACKAGING, CABLE AND LABELING INDUSTRY. INCLUDES 60MM SINGLE SCREW EXTRUDER, 30/1 L/D, DRIVEN BY 60HP DC ...

USED EGAN CAST FILM TAKE OFF UNIT HAVING A 28" FACE X 12" DIAMETER CHROME ROLL. PROVISION FOR A SECOND ROLL. ROLL IS DRIVEN BY AN AC MOTOR WITH INVERTER. PULL ROLL STAND HAS (3) METAL ROLLS ND (1) SET...

USED CINCINNATI MILACRON EXTRUSION COATING LINE CONSISTING OF THE FOLLOWING: - (1) 30" 2-SHAFT UNWIND STAND ABLE TO HANDLE UP TO 60" DIAMETER ROLLS. SET UP FOR APPROXIMATELY 12" ID CORES. SERIAL #2470...

USED 40" WIDE EGAN PILOT PLANT CAST FILM LINE, NEW 1989. LINE IS 5-LAYER DESIGN. RATED AT 200 FEET PER MINUTE. LINE CONSISTS OF THE FOLLOWING: - 3.5" EGAN 32/1 L/D EXTRUDER DRIVEN BY 150 HP DC MOT...

USED 45" WIDE (1143MM) 5-LAYER EGAN EXTRUSION COATER LAMINATOR. LINE IS EQUIPPED WITH 50" MAXIMUM O.D. TURRET UNWIND WITH SPLICER AND 40 HP RELIANCE DRIVE MOTOR WITH ALLEN BRADLEY PANELVIEW 900 CONTRO...

USED 45" WIDE MARSHALL & WILLIAMS BOPP 3-ROLL CASTING STATION. ROLL SIZES ARE AS FOLLOWS: ROLL #1 = 45" FACE X 40" DIA ROLL #2 = 45" FACE X 60" DIA ROLL #3 = 45" FACE X 50" DIA ROLLS MOUNTED IN 4" S...

USED EGAN/BLACK CLAWSON 50" WIDE TANDEM CO-EXTRUSION, EXTRUSION COATING LINE. LINE CONSISTS OF THE FOLLOWING: 50" WIDE BLACK CLAWSON SINGLE TURRET PRIMARY UNWIND FOR 40" DIAMETER ROLLS WITH AUTO-CUT...

USED 52" WIDE SCHIAVI/NRM EXTRUSION COATING LINE. LINE ALSO IS CAPABLE OF BEING UTILIZED AS ADHESIVE COATER WITH ROTOGRAVURE COATING. LINE CONSISTS OF 31" O.D. PRIMARY UNWIND, SINGLE SIDED ENERCON ...

USED 54" WIDE CASTING STATION. INCLUDES 16" DIAMETER CASTING ROLL WITH TRAVERSING BRUSH ASSEMBLY MOUNTED ADJACENT TO CASTING ROLL. INCLUDES EDGE TRIM SLITTING STATION, (3) 12" DIAMETER COOLING ROLLS W...

USED 54" MARSHALL & WILLIAMS CAST EMBOSSED UNIT HAVING A 30" DIAMETER MAIN ROLL. UNIT INCLUDES 12" DIAMETER SILICONE ROLL WITH 6" CHROME ROLL AS WELL AS PINCHING STRIPPER ASSEMBLY WITH ADDITIONAL ROLL...

USED MARSHALL & WILLIAMS TENTER FRAME FOR TRANSVERSE DIRECTION ORIENTATION OF FLEXIBLE AND SOME RIGID WEBS. APPROXIMATELY 30' IN LENGTH AND 60" WIDE WEB AT EXIT. TWO SHAFT UNWIND WITH BOSCHERT TYPE SA...

USED 62" WIDE EGAN CAST FILM STATION CONSISTING OF AN 18" DIA. CAST ROLL, 12" DIA. COOLING AND 12" DIA. HEAT SET ROLLS. WITH DRIVE. PREV. USED FOR NYLON FILM.

USED 65" WIDE CAST FILM TYPE TAKE OFF CONSISTING OF 3-8" DIA. CHILL ROLLS, EDGE TRIM STATION AND TURRET WINDER FOR 18" DIA. ROLLS. INCLUDES END FED DIE 48" WIDE PREV. USED 0-20 MILL VINYL.

USED EGAN CO-EX CAST FILM LINE COSISTING OF THE FOLLOWING: - (1) 2.5" 24:1 L/D AIR COOLD EXTRUDER, WITH 50 HP DC DRIVE PACKAGE, VACUUM RECEIVER WITH CONAIR BLENDING SYSTEM, HYDRAULIC SCREEN CHANGER ...

USED CAST LINE CONSISTING OF THE FOLLOWING: - 4.5" EGAN EXTRUDER WITH 150 HP DRIVE AND SCREEN CHANGER - 80" EGAN CAST DIE - 84" CASTING STATION WITH CHILL ROLLS AND RUBBER ROLLS - 84" SANO SINGLE TUR...

USED 82" WIDE WEBEX CAST FILM STATION CONSISTING OF 18" OUTER DIAMETER. CASTING ROLL WITH 82" FACE AND 24" OUTER DIAMETER. SECONDARY COOLING ROLL WITH 82" FACE. DESIGNED FOR 80" WIDE FINISHED PRODUCT...

(1) SET OF CAST FILM DOWNSTREAM LAST USED IN THE EXTRUSION OF LDPE, LLDPE AND PP CAST FILM. PACKAGE INCLUDES: A) ONE(1) USED EDI 86" WIDE EDI AUTOFLEX H-40 CAST FILM DIE WITH MECHANICALLY ADJUSTED DEC...

USED DAVIS STANDARD EXTRUSION COATING PACKAGE DESIGNED TO MAKE 40" TO 85" FINISHED WEB WIDTH. LINE RATED AT 400 FEET PER MINUTE MECHANICAL LINE SPEED. UNIT WAS LAST USED FOR .01" OF LOW DENSITY OF P...

USED 2700MM BATTENFELD GLOENCO CAST FILM LINE CONSISTING OF: A) 150MM BATTENFELD/GLOENCO EXTRUDER, 32/1 L/D, ELECTRICALLY HEATED AIR COOLED BARREL, DRIVEN BY 300KWl DC MOTOR B) 150MM SCREEN CHANG...

USED 116" WIDE BLACK CLAWSON FILM CAST EMBOSSED STATION WITH 24" DIAMETER MATTE PRIMARY CASTING ROLL, 12" CHROME BACK UP ROLL, 12" PICK OFF ROLL AND 16" RUBBER NIP ROLL. ALL ROLLS EQUIPPED WITH ROTARY...

USED GLOENCO 118" WIDE CO-EXTRUSION, SHEET EXTRUSION LINE, 5-LAYER DESIGN. NEW 1993. LINE CONSISTS OF THE FOLLOWING: - 60MM BATTENFELD CONTRA COOL EXTRUDER, 30/1 L/D - 120MM BATTENFELD CONTRA COOL EX...

UNUSED 120" CINCINNATI CAST FILM CASTING SECTION/EMBOSSER. UNIT IS DESIGNED TO ACCOMMODATE AN EMBOSSING ROLL FROM 17"-21" IN DIA. WITH A 16" DIA. RUBBER COVERED PRESSURE ROLL. ROLLS ARE NOT INCLUDED I...

USED 126" FACE X NOMINAL 36" DIAMETER MATTE FINISH CAST ROLL. ROLL IS CORED FOR COOLING.