USED PTI CIRCULAR FOAM SHEET DIE. INCLUDES SPARE INSERTS AND DT INDUSTRIES/SENCORP BUTANE FOAM DISSTRIBUTION SYSTEM. MODEL DSM 564 SERIAL NUMBER 12159615069. 115 VOLT. 6 AMPS. LAST USED WITH 4.5" 48/...

UNUSED EDI 14" H40 SHEET DIE. UNIT HAS THREE CENTER BACK ENTRANCES. CENTER ENTRANCE IS 1.0" DIA AND UPPER AND LOWER ENTRANCES ARE .5" DIA. UPPER FLEXIBLE LIP. FIXED INTEGRAL LOWER LIP. LIP OPENING RA...

USED 14" EDI MODEL ULTRAFLEX 40 SHEET DIE HAVING AN UPPER FLEXIBLE AND A FIXED INTEGRAL LOWER LIP. CENTER BACK FED ENTRANCE. SERIAL #92-14471. .010-.050 LIP OPENING. DIE IS SET UP FOR THREE ZONES OF T...

USED CLOEREN SHEET EXTRUSION DIE HAVING A 16" SLOT OPENING. UNIT HAS AN UPPER FLEXIBLE LIP, 45 DEGREE RESTRICTOR BAR AND FIXED REMOVABLE LIP. MANUFACTURED IN 1999. FLEX RANGE OF 75,000.

USED 18" EDI SHEET DIE WITH FLEXIBLE UPPER LIP AND FIXED REMOVABLE LOWER LIP. HAS 45 DEGREE RESTRICTOR BAR.

USED 18" EDI SHEET DIE WITH FLEXIBLE UPPER LIP. FIXED REMOVABLE LOWER LIP. 45 DEGREE RESTRICTOR BAR.

USED 18" EDI SHEET DIE WITH FLEXIBLE UPPER LIP. FIXED REMOVABLE LOWER LIP. 45 DEGREE RESTRICTOR BAR.

USED 18" EDI SHEET DIE WITH FLEXIBLE UPPER LIP. FIXED REMOVABLE LOWER LIP. 45 DEGREE RESTRICTOR BAR.

USED 18" WIDE EDI, MODEL H75 SHEET DIE. SERIAL NUMBER 88-11898, HAS FIXED BOTTOM LIP, NO RESTRICTOR BAR. EQUIPPED WITH CIRCULAR 2" O.D. CENTER BACK INLET.

USED 20" WIDE CLOEREN 3 LAYER MANUAL SHEET DIE. UPPER INTEGRAL FLEXIBLE LIP WITH MICRO ADJUSTMENT. FIXED REMOVEABLE LOWER LIP. THREE OBLONG ENTRANCES LOCATED IN THE BACK OF THE DIE. SET UP TO RUN THR...

ONE (1) USED 20" PRODUCTION COMPONENTS DUAL MANIFOLD SIDING DIE. 2" DIAMETER CENTER BACK ENTRANCE FOR PVC AND SIDE ENTRANCE FOR ACRYLIC.020-.060 GAP OPENNING. 3" X 3/8" NAKED EDGE. UPPER ADJUSTABLE L...

USED 20" ALLIED DIES INC DUAL MANIFOLD SHEET DIE. WITH 2" BACK CENTER FED MAIN ENTRANCE. 240 VOLTS, 1PH/9 ZONES. LAST USED FOR PVC SIDING. 3"X3/8" NAKED EDGE, .060" LIP OPENING. REBUILT BY ALLIED...

USED 20" ALLIED DIES INC DUAL MANIFOLD SHEET DIE. WITH 2" BACK CENTER FED MAIN ENTRANCE. 240 VOLTS, 1PH 9 ZONES. 3"X0" NAKED EDGE, .060" LIP OPENING. LAST USED FOR PVC SIDING. REBUILT BY ALLIED D...

USED 20" ALLIED DIES INC DUAL MANIFOLD SHEET DIE. WITH 2" BACK CENTER FED MAIN ENTRANCE. 240 VOLTS, 1PH, 9 ZONES. 3"X0" NAKED EDGE, .060" LIP OPENING. LAST USED FOR PVC SIDING. REBUILT BY ALLIE...

USED 20" ALLIED DIES INC DUAL MANIFOLD SHEET DIE. WITH 2" BACK CENTER FED MAIN ENTRANCE. 240 VOLTS. LAST USED FOR PVC SIDING. ALLIED DIES REWORK NUMBER #00-6239-E.

USED 20" PRODUCTION INC DUAL MANIFOLD SHEET DIE. WITH 2" BACK CENTER FED MAIN ENTRANCE. 240 VOLTS, 1PH, 9 ZONES. 3"X3/8" NAKED EDGE, .060" LIP OPENING. LAST USED FOR PVC SIDING. REBUILT BY ALLIE...

USED 22" WIDE CLOEREN EPOCH IV 3 LAYER MANUAL SHEET DIE. UPPER INTEGRAL FLEXIBLE LIP WITH MICRO ADJUSTMENT. FIXED REMOVEABLE LOWER LIP. THREE OBLONG ENTRANCES LOCATED IN THE BACK OF THE DIE. SET UP TO...

USED PRODUCTION COMPONENTS 25" HD-75 MASTERFLEX SHEET DIE. .010-.085 LIP OPENING. 230 VOLTS. 1.25" DIAMETER REAR MATERIAL ENTRY. MANUFACTURED 10/1992. SERIAL #2175-92.

USED 28" WIDO EDI MODEL ADRW SHEET EXTRUSION DIE HAVING AN UPPER FLEXIBLE LIP AND A FIXED LOWER LIP. NEW 1999. DIE HAS BEEN REWORKED BY ALLIED DIES. S/N 99-1306-0102.

USED 28" EDI COATING DIE MODEL AUTOFLEX H40, S/N 80-3996-1-2. NEW 1980. CURRENTLY SET UP AS MANUALLY LIP ADJUSTED DIE, NOT AUTOFLEX. HAS CENTER BACK FEED WITH APPROXIMATELY 1" DIAMETER INLET.

USED 28" EDI SHEET DIE. SERIAL # 731259.

USED 28" WIDE NRM 90 DEGREE DOWN CASTING DIES.

USED PRODUCTION COMPONENTS SHEET DIE HAVING A 28" SLOT OPENING. UPPER FLEXIBLE LIP. FIXED INTEGRAL LOWER LIP, DECKLING PROVISION. 1" CENTER BACK ENTRANCE. UNIT REWORKED BY ALLIED DIES. REWORK NUMBER A...

USED EDI 28.5" ULTRAFLEX H40 SHEET DIE. .001-.040 LIP OPENING, 240 VOLT 350 WATT HEATERS. 1.25" DIAMETER REAR MATERIAL ENTRY. MOUNTED ON 41" CENTERLINE V-CASTER STAND. MANUFACTURED 4/1989. SERIAL #89-...

USED 30" WIDE ROBBINS 90 DEGREE ANGLE DOWN EXTRUSION CASTING DIE.

USED 32" WIDE ALLIED DIE SHEET EXTRUSION DIE. 1" CENTER BACK FEED. UPPER FLEXIBLE LIP. FIXED INTERGRAL LOWER LIP. SERIAL NUMBER 1520-02.

USED 35" E.D.I. ULTRAFLEX 40 SHEET DIE HAVING AN UPPER FLEXIBLE AND A FIXED INTEGRAL LOWER LIP WITH A 3/4" TOP CENTER FED ENTRANCE FOR VERTICAL DOWNWARD EXTRUSION. DIE IS SET UP FOR 3 ZONES OF TEMPERA...

USED 35" E.D.I. ULTRAFLEX 40 SHEET DIE HAVING AN UPPER FLEXIBLE AND A FIXED INTEGRAL LOWER LIP WITH A 3/4" TOP CENTER FED ENTRANCE. DIE IS SET UP FOR 3 ZONES OF TEMPERATURE CONTROL.

USED 35" JOHNSON SHEET DIE HAVING AN UPPER FLEXIBLE LIP AND A FIXED, REMOVABLE LOWER LIP. 3/4" TOP CENTER FED ENTRANCE. ADJUSTING BOLTS ON 1" CENTERS. LAST USED ON .001 THICK HDPE. S/N 8045.

USED 35" JOHNSON SPARTAN SHEET DIE WITH ADAPTER MOUNTED TO SCREEN CHANGER. DIE HAS 0 TO .030" OPENING RANGE AND HAS A TOP CENTER FED ENTRANCE FOR VERTICAL DOWNWARD EXTRUSION. MISSING ADJUSTING BOLTS. ...

USED 35" MPM SHEET DIE HAVING AN UPPER FLEXIBLE AND A FIXED INTEGRAL LOWER LIP WITH A 3/4" TOP CENTER FED ENTRANCE. DIE IS SET UP FOR 3 ZONES OF TEMPERATURE CONTROL.

USED 35" MPM SHEET DIE. UPPER SLIDING LIP. PUSH/PULL ADJUSTMENT. TOP CENTER FEED OPENING.

USED 35" MPM SHEET DIE. UPPER SLIDING LIP. PUSH/PULL ADJUSTMENT. TOP CENTER FEED OPENING.

USED 36" WIDE PRODUCTION COMPONENTS MASTERFLEX H75 FLEX LIP SHEET EXTRUSION DIE, JOB # 4446-97. UPPER ADJUSTABLE FLEXIBLE LIP. FIXED BOTTOM LIP. SET UP FOR .000-.075. SET UP FOR THREE ZONES OF TEM...

USED 38" EDI MODEL H75 AUTOFLEX SHEET DIE. CENTER BACK FED ENTRANCE WITH MICRO ADJUSTMENT. SERIAL # 88-12191-2. OPENING RANGE REPORTED .005-.080".

USED 40" EXTRUSION COATING DIE. UNIT HAS AN UPPER SLIDING LIP WITH PUSH/PULL ADJUSTMENT AND A FIXED REMOVEABLE LOWER LIP. EXTERNAL ADJUSTABLE DECKLES. CENTER BACK FED ENTRANCE. 41" LONG STATIC MIXER. ...

USED E.D.I. 40" AUTOFLEX SHEET DIE, MOUNTED ON A STAND. 230 VOLT. HAS 3/4" BACK CENTER FEED ENTRANCE.

USED 40" JOHNSON "SPARTAN" SHEET DIE HAVING AN INTEGRAL UPPER FLEXIBLE LIP AND A FIXED LOWER LIP. GAP CURRENTLY .013". SERIAL #2657-68.

USED 41" E.D.I. ULTRAFLEX 40 SHEET DIE HAVING AN UPPER FLEXIBLE AND A FIXED INTEGRAL LOWER LIP WITH A 3/4" TOP CENTER FED ENTRANCE. DIE IS SET UP FOR 3 ZONES OF TEMPERATURE CONTROL.

USED 42" EDI MODEL H-40 SHEET DIE HAVING AN UPPER FLEXIBLE LIP AND AN INTEGRAL FIXED LOWER LIP. END CENTER FED ENTRANCE. DIE IS PRESENTLY DISSAMBLED.

USED 42" EDI MODEL H75 FLEX LIP SHEET DIE. HAS NON-REMOVEABLE LOWER LIP, CO-EXTRUSION ENTRY. REPORTED .015" - .090" DIE GAP RANGE.

USED 42" SHEET EXTRUSION DIE, MANUFACTURER UNKNOWN. WITH 1.25" DIAMETER REAR MATERIAL ENTRY. 230 VOLTS. SERIAL #8812264-2.

USED 44" EDI SHEET DIE WITH FLEXIBLE UPPER LIP AND FIXED LOWER LIP. WITH CENTER BACK FED ENTRANCE.

USED EXTRUSION DIES INC ULTRA FLEX R-100 SHEET DIE HAVING A 44" SLOT OPENING. UPPER FLEXIBLE LIP. PROVISION FOR FAST GAP ON LOWER LIP. CENTER BACK FED ENTRANCE. 45 DEGREE RESTRICTOR BAR. .100 OF ADJUS...

USED 44" WIDE EDI ULTRAFLEX H75, FLEX LIP SHEET EXTRUSION DIE. HAS BACK CENTER AND FIXED BOTTOM LIP. FORMERLY V710-438

USED 44" WIDE FLEX LIP SHEET EXTRUSION DIE. MODEL ULTRAFLEX H75. HAS FIXED BOTTOM LIP. NO CHOKER BAR OR DIE STAND INCLUDED.

USED 44" MODEL H75 FLEX LIP SHEET EXTRUSION DIE WITH CENTER BACK FEED. NO CHOKER BAR INCLUDED. INCLUDES FIXED BOTTOM LIP.

USED 45" EGAN THREE (3) LAYER SHEET DIE. UNIT HAS (3) BACK ENTRANCES WITH (3) RESTRICTORS TO ADJUST FLOW. UPPER SLIDING REMOVABLE AND FIXED LOWER LIP. MANUFACTURED 1970. LAST USED FOR CAST FILM.

USED 46" WIDE EDI MODEL H-40 ULTRA FLEX SHEET EXTRUSION DIE. HAS LIP OPENING .001-040". ENTRANCE DIAMETER 1.375". DESIGNED TO PRODUCE MATERIALS FROM .005 TO .025" THICK. LAST USED ON 4.5" EXTRUDER.

USED 46" WIDE EDI H75 FLEX LIP SHEET EXTRUSION DIE. HAS CENTER BACK FEED AND FIXED BOTTOM LIP. NO RESTRICTOR BAR.

USED 46" E.D.I. ULTRAFLEX R-75 SHEET DIE HAVING A 1" DIAMETER BACK CENTER FEED WITH 45 DEGREE RESTRICTOR BAR.

46" EGAN CAST FILM DIE PREVIOUSLY USED IN COATING LAMINATING LINE. NO NAMEPLATE ON UNIT.

USED 48" E.D.I. AUTOFLEX DIE. DIE WAS MANUFACTURED IN 1995. HAS LAB USE ONLY. INCLUDES MANUAL AND DRAWINGS.

USED 48" WIDE EDI H75 FLEX LIP SHEEET EXTRUSION DIE. HAS FIXED BOTTOM LIP AND CENTER BACK FEED. NO RESTRICTOR BAR.

USED 48" WIDE EDI MODEL RC-100TFG SHEET EXTRUSION DIE HAVING AN UPPER FLEXIBLE LIP AND REMOVEABLE LOWER LIP. FAST GAP ON LOWER LIP. 45 DEGREE RESTRICTOR BAR. 4" X 1 1/4" BACK CENTER FED ENTRANCE. 240/...

USED 48" WIDE FLEXLIP FLAT FILM EXTRUSION DIE. NO RESTRICTOR BAR.

USED 48" WIDE MASTERFLEX MODEL R/LD75, FLEX LIP SHEET EXTRUSION DIE. HAS CENTER BACK FEED, EQUIPPED WITH RESTRICTOR BAR, AND REPLACEABLE LOWER LIP. SERIAL #JC 0544-88.

USED EXTRUSION DIES INC MODEL H-40 SHEET DIE HAVING A 49" SLOT OPENING. UPPER FLEXIBLE LIP. FIXED REMOVABLE LOWER LIP. CENTER BACK FEED ENTRANCE. UNIT SET UP FOR (5) ZONES OF TEMPERATURE CONTROL. 480/...

USED EDI MODEL AUTOFLEX (CONVERTED TO MANUAL GAP ADJUST) H40 FLEX LIP SHEET EXTRUSION DIE HAVING A 49.5" SLOT OPENING. INTEGRAL UPPER FLEXIBLE LIP AND FIXED LOWER LIP. DECKLING PROVISION. 1" BACK CENT...

USED 52" EDI ULTRAFLEX SHEET DIE, MODEL UH75, SERIAL #98-19981. HAS FIXED BOTTOM LIP, CENTER BACK FEED, MOUNTED ON DIE CART. NO RESTRICTOR BAR.

UNUSED 52 EDI DUAL ENTRY SHEET DIE. DIE IS MODEL 52 U/F R75 DUAL. EQUIPPED WITH RESTRICTOR BAR AND FAST GAP CONTROL. NEW 2008.

USED 52" WIDE FLEX LIP SHEET EXTRUSION DIE PREVIOUSLY USED FOR 15 THOUSANDTHS SHEET. HAS SPARE BOTTOM LIP. LIP CURRENTLY INSTALLED, REPORTEDLY WILL OPEN TO 60 THOUSANDTHS. HAS 90° RESTRICTOR BAR, DIE ...

USED 52" WIDE FLEXLIP FLAT FILM EXTRUSION DIE. NO RESTRICTOR BAR. CENTER BOTTOM FED DESIGN

USED 52" JOHNSON TITAN SHEET DIE HAVING APPROXIMATELY A 1" BACK CENTER FED ENTRANCE. SET UP FOR (5) ZONES OF TEMPERATURE CONTROL. LAST USED ON .019 THICK POLYROPYLENE WITH A 4.5" EXTRUDER.

USED 54" WIDE SHEET EXTRUSION DIE. NO R-BAR. PREVIOUSLY DESIGNED AS AUTOFLEX DIE BUT CONVERTED TO STANDARD FLEX LIP DESIGN.

USED 54" WIDE EGAN COATING DIE PREVIOUSLY USED IN AN EXTRUSION COATING PACKAGE.

USED 55" WIDE EDI ULTRAFLEX H40 FILM/LAMINATING DIE. SERIAL #94-16747-1. PREVIOUSLY USED FOR LAMINATING POLYSTYRENE FILM ONTO POLYSTYRENE FOAM SHEET. MOUNTED ON STAND, END FED DESIGN.

USED 55" E.D.I. ULTRA-FLEX 40 SHEET DIE HAVING AN UPPER FLEXIBLE LIP, FIXED INTEGRAL LOWER LIP, COAT HANGER MANIFOLD AND 3/4 BACK CENTER FED ENTRANCE. ADJUSTING BOLTS ON 1" CENTERS. SET UP FOR FIVE ZO...

USED EDI 56" WIDE EDI ULTRA FLEX H40C FLEX LIP SHEET EXTRUSION DIE SERIAL NUMBER 89-12896-1. HAS 1" DIAMETER CENTER BACK FEED ENTRANCE. SET UP FOR .010-.050 GAP OPENING.

USED CLOEREN 56" FLEX LIP SHEET DIE WITH CENTER BACK FEED AND REPLACEABLE LOWER LIP, GAP .010-.090, SERIAL # 91-922.

USED 57" E.D.I. U-40 FLEXIBLE SHEET DIE HAVING AN UPPER FLEXIBLE LIP, FIXED LOWER LIP AND APPROXIMATELY A 1" BACK CENTER FED ENTRANCE. SERIAL # 71-1042

USED 58" WIDE EGAN EXTRUSION COATING DIE. INCLUDES DECKLES, 9" ADAPTOR, HAS 3/4" ORIFICE.

USED 60" E.D.I. FLEXIBLE SHEET DIE HAVING AN UPPER FLEXIBLE LIP, FIXED LOWER LIP AND APPROXIMATELY A 3/4" BACK CENTER FED ENTRANCE. SERIAL #75-2023.

USED 62" JOHNSON "SPARTAN" SHEET DIE HAVING AN INTEGRAL UPPER FLEXIBLE LIP AND A FIXED LOWER LIP. COAT HANGER TEAR DROP MANIFOLD. 3/4" BACK CENTER FED ENTRANCE. SET UP .000 TO .030 LIP OPENING. PROVIS...

USED 64" EDI SHEET DIE HAVING AN UPPER FLEXIBLE LIP, FIXED INTEGRAL LOWER LIP. UNIT BELIEVED TO HAVE A BOTTOM CENTER FED ENTRANCE.

USED 65" WIDE REIFENHAUSER CAST FILM DIE. FLEX LIP DESIGN BUT MISSING ADJUSTING BOLTS AND DIE HALF BOLTS. NO HEATERS.

USED 66" E.D.I. FLEX LIP SHEET EXTRUSION DIE. EDI REWORK JOB # 91-14060-01. CENTER BACK FEED, FIXED LOWER LIP.

USED 78" E.D.I. MAGNUM SHEET DIE. 90 DEGREES RESTRICTOR BAR. SEVEN (7) 240 VOLT HEATER ZONES. 18,900 WATTS TOTAL CONSUMPTION. 0.550 MAXIMUM LIP OPENING. 1.5" DIAMETER BACK CENTER FEED WITH 10" ADAPTO...

USED EDI MODEL R75 SHEET DIE HAVING A 78" WIDE SLOT ENTRANCE. UNIT HAS AN UPPER INTEGRAL FLEXIBLE LIP AND A FIXED REMOVABLE LOWER LIP. CENTER BACK FED ENTRANCE. 45° RESTRICTOR BAR. INCLUDES LOWER LIPS...

USED 78" EGAN CAST FILM DIE. LAST USED ON POLYETHYLENE CAST FILM. CENTER BACK FED ENTRANCE.

USED EDI 3-MANIFOLD SHEET DIE HAVING A 78-1/4" SLOT OPENING WITH A UPPER ADJUSTABLE LIP, FIXED REMOVABLE LOWER LIP AND (2) RESTRICTOR BARS. PRESENTLY INSTALLED IS LOWER LIP FOR GAP RANGE FROM .345 T...

USED EDI 3-MANIFOLD SHEET DIE HAVING A 78-1/4" SLOT OPENING WITH A UPPER ADJUSTABLE LIP, FIXED REMOVABLE LOWER LIP AND (2) RESTRICTOR BARS. PRESENTLY INSTALLED IS LOWER LIP FOR GAP RANGE FROM .345 T...

USED 88" WIDE EDI AUTOFLEX 40 FLEX LIP FILM DIE, NEW 1988. PREVIOUSLY USED ON .0007-.009 MIL PP MATERIAL.

USED E.D.I. AUTOFLEX SHEET DIE, HAVING A 90" WIDE LIP OPENING. LIP RANGE 1MM-30MM AT 1,500-2,000 LBS AN HOUR. PREVIOUSLY RUNNING LINEAR LOW, LOW DENSITY PE REPORTEDLY CAPABLE OF RUNNING PRODUCTS FROM ...

USED 90" EDI MODEL ULTRAFLEX H40 SHEET DIE HAVING AN UPPER FLEXIBLE LIP, FIXED INTEGRAL LOWER LIP AND AN END CENTER FED ENTRANCE. COAT HANGER MANIFOLD. LIP OPENING RANGE IS .001 TO .040 . UNIT IS ...

USED 90" WIDE RUBBER SHEET EXTRUSION DIE. OIL HEATED DESIGN, PREVIOUSLY USED ON 12" FARREL EXTRUDER.

USED 114" EDI HEAVY DUTY SHEET DIE. 1"X4" OBLONG FEED OPENING. SERIAL #RW74-1489-1. 220 VOLTS ON HEATERS.