USED SHEET EXTRUSION DOWNSTREAM EQUIPMENT CONSISTING OF THE FOLLOWING: A) 8" KILLION SHEET DIE HAVING AN ADJUSTABLE UPPER SLIDING LIP AND FIXED REMOVABLE LOWER LIP. B) SHEET STACK HAVING (3) 10" ...

USED 10" WIDE KILLION 3-ROLL CHROME ROLL STACK. HAS 5" O.D. CHROME ROLLS X 10" WIDE. EACH WITH ROTARY UNION. HAS PULL ROLL ASSEMBLY AND SINGLE POSITION WINDER.

USED LABORATORY WAYNE SHEET EXTRUSION DOWNSTREAM INCLUDING THE FOLLOWING: A) (1) USED CLOEREN MASTERFLEX SHEET DIE HAVING A 10" WIDE SLOT OPENING. UNIT HAS A REMOVABLE LOWER LIP AND A 45 DEGREE RESTR...

USED LABORATORY WAYNE SHEET EXTRUSION LINE INCLUDING THE FOLLOWING: A) (1) USED 1.75" 30:1 WAYNE EXTRUDER HAVING A 4-ZONE ELECTRICALLY HEATED, AIR COOLED BARREL AND VENTED BARREL. GEARBOX IS DRIVEN...

USED SET OF LABORATORY FOAM DOWNSTREAM EQUIPMENT INCLUDING THE FOLLOWING: A) 1.5" FOAM DIE WITH STAND, 2 ZONE AIR RING, 3.5"OD X 5" WATER COOLED COOLING MANDREL, INLINE STATIC MIXER, OPERATOR CONTROL...

USED BATTENFELD, BELLAFORM SHEET EXTRUSION/THERMOFORMING LINE. NEW 1989. WILL ACCOMMODATE MAXIMUM 24" SHEET WIDTH X 8.6" SHEET LENGTH. INCLUDES CHROME ROLLS FOR COOLING, PRE-HEATER, MODEL INF 200 TC F...

USED BELLAFORM CO-EXTRUSION SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: 120MM SAMAFOR PRIMARY EXTRUDER, 45MM SAMAFOR CO-EXTRUDER. INCLUDES GEAR PUMP, 800MM SHEET EXTRUSION DIE SUPPLYING 720MM (2...

USED JOHNSON 16" DIAMETER X 30" WIDE THREE-ROLL SHEET DOWN STACK. PNEUMATICALLY OPERATED CORED CHROME ROLLS, ROLLS ARE DRIVEN BY A SILENT CHAIN DRIVE, DRIVE GEARBOXES FOR BOTH THE CHROME ROLLS AND THE...

USED CINCINNATI MILACRON 2-ROLL COOLING ROLL STACK INCLUDING UNWIND. ALSO INCLUDED IN PACKAGE IS THE FOLLOWING: - 18"X34" WIDE 2-ROLL CHROME PLATED CO0LING ROLLS - DRIVEN BY 5 HP DC MOTOR ROLLS ARE ...

USED APPROXIMATELY 40" WIDE EPDM RUBBER SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: ONE 8" BERSTORFF HOT FEED RUBBER EXTRUDER INCLUDING APPROXIMATELY 16"O.D. CIRCULAR EXTRUSION DIE AND COOLIN...

USED COVEMA PVC FOAM SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: PANTHER 125MM COUNTER-ROTATING TWIN SCREW EXTRUDER, 22/1 L/D. DRIVEN BY 60KW DC MOTOR, ELECTRICALLY HEATED, WATER COOLED BARREL....

USED 40" WIDE STERLING CO-EXTRUSION SHEET LINE, RECONDITIONED IN 1998-2000 TO PRODUCE FILMS OF SYNTHETIC PAPER 4-20 MILS THICK. LINE CONSISTS OF THE FOLLOWING: 3.5" STERLING 30/1 L/D EXTRUDER DRIVEN...

USED 40" WIDE JOHNSON SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: - 4.5" JOHNSON 24/1 L/D VENTED EXTRUDER WITH WATER/AIR COOLING ON BARREL. INCLUDES DC MOTOR WITH PACEMASTER DC DRIVE AND 11.1/1...

USED EQUIPMENT FOR MAKING FLOOR MATTING RUNNERS, SHELF LINING, AND CAMELBACK. CONSISTING OF A 4.5" DAVIS STANDARD 20/1 EXTRUDER WITH 50 HP RELIANCE DC DRIVE. HAS SPARE SCREW. HAS (1) 35" WIDE MATTI...

USED 1200 MM WIDE TOSHIBA MULTI LAYER SHEET EXTRUSION LINE PREVIOUSLY USED FOR PP/PS, 1200 MM MAXIMUM WIDTH, .2-1.0 MM MAXIMUM THICKNESS. LINE CONSISTS OF (2) TOSHIBA 90 MM EXTRUDERS, 32/1 L/D, MODEL...

USED DAVIS STANDARD SHEET TAKE-OFF UNIT CONSISTING OF (3) 48" FACE ROLLS MOUNTED IN A VERTICAL ARRANGEMENT FOR A DOWNSTACK OPERATION. ALL THREE ROLLS MEASURE 16" IN DIAMETER. TOP ROLL IS TUNGSTEN AND ...

USED PROCESSING TECHNOLOGIES INC MODEL 5024 3-ROLL DOWN STACK. MANUFACTURED 2/2000. 24" DIAMETER X 50" WIDE LOWER 2 CHROME ROLLS, UPPER ROLL IS 12" X 50", ALL CHROME ROLLS CORED FOR COOLING, ROLLS ARE...

USED NRM 3-ROLL STACK WITH PULL ROLLS. 53"X16". INCLUDES APPROXIMATELY 8' COOLING CONVEYOR. NO PUMPS OR HEAT EXCHANGERS INCLUDED.

USED 53" WIDE HPM 3-ROLL CHROME ROLL STACK, MODEL SHII. EACH ROLL IS 24" O.D. INCLUDES (3) PUMPS AND HEAT EXCHANGERS, 8" X 53" WIDE RUBBER PULL ROLL ASSEMBLY, AND 14' COOLING CONVEYOR. STACK MODEL ...

USED WELEX MODEL 18X30X53 SLRH SHEET TAKE-OFF UNIT CONSISTING OF (2) 53" FACE X 30" DIAMETER ROLLS AND (1) 53" FACE X 18" DIAMETER ROLL. ROLLS ARE MOUNTED IN A VERTICAL ARRANGEMENT WITH THE 18" DIAMET...

USED 54" WIDE C-PET CO-EX SHEET EXTRUSION LINE. LINE CONSISTS OF THE FOLLOWING: (2) MAGUIRE MIXER FEEDERS, 6" NRM MAIN EXTRUDER WITH 250KW DC DRIVE. DESICCANT POLYMER DRYING SYSTEM WITH (2) DRYING H...

ONE (1) USED MARSHALL AND WILLIAMS SHEET TAKE-OFF UNIT CONSISTING OF (3) 54" FACE ROLLS MOUNTED IN A VERTICAL ARRANGEMENT FOR A DOWNSTACK OPERATION. ALL THREE ROLLS MEASURE 16" IN DIAMETER AND ARE CE...

USED 54" WIDE NRM SHEET EXTRUSION LINE NEW APPROXIMATELY 1979. LINE INCLUDES THE FOLLOWING: - 3.5" NRM PACEMAKER PMIII 32/1 L/D. - 3.5" SCREEN CHANGER - 54" FLEX LIP RESTRICTOR BAR SHEET DIE - 42"...

USED 54" WIDE NRM 3 ROLL CHROME ROLL STACK. STACK IS EQUIPPED WITH (3) 16"O.D. ROLLS EACH WITH 54" FACE WIDTH. HAS CONTROL PANEL WITH EUROTHERM 94 DIGITAL CONTROLS, LINE VARIABLE SPEED CONTROL, RUBB...

USED DAVIS STANDARD 3-ROLL DOWN STACK. (3) HYDRAULICALLY ADJUSTED 24"X54" WATER COOLED CORED CHROME ROLLS. CHROME ROLLS ARE POWERED BY A 5 HP DC MOTOR THROUGH A GEARBOX AND ARE COOLED BY (2) 28" HEAT ...

USED 3 ROLL CHILL ROLL STAND. CINCINNATI MILACRON MODEL ROLL STACK STAND, SERIAL #X70A0100081. 3-ROLL VERTICAL CHROME POLISHING ROLL STACK, 18" DIAMETER MIDDLE AND BOTTOM ROLLS, 13" DIAMETER TOP ROL...

USED 57" WIDE CINCINNATI MILACRON CO-EXTRUSION SHEET LINE. NEW 1998. LINE CONSISTS OF THE FOLLOWING: - 6" PRIMARY EXTRUDER 30/1 L/D VENTED BARREL, INCLUDING SCREEN CHANGER - 2.5" CO-EXTRUDER 30/1 L...

USED DAVIS STANDARD/SENCORP TANDEM FOAM LINE. ALL EQUIPMENT NEW OR REBUILT 1997. LAST USED TO MAKE 52 1/2" WIDE FINISHED SHEET LINE. LIN INCLUDES THE FOLLOWING: A) (1) USED 4.5" 32:1 GLOUCESTER EXTR...

USED DAVIS STANDARD 60" WIDE X 24" O.D. 3-ROLL CHILL ROLL STACK, TYPE DN STK 3-24, SO #DS325, SERIAL #M3039. INCLUDES (3)PUMP ASSEMBLY WITH HEAT EXCHANGERS AND CONTROLS, AUXILIARY PUMP AND HEAT EXCHA...

USED CUSTOM BUILT 60" WIDE SHEET EXTRUSION STACK. HAS 18" O.D. BOTTOM ROLL AND 30" O.D. MIDDLE AND TOP ROLL. HYDRAULICALLY LOADED TOP AND BOTTOM ROLLS MOUNTED ON 45° DIE ENTRY. UPSTACK CONFIGURATION. ...

USED ER-WE-PA (NOW OWNED BY DAVIS STANDARD) MULTI-LAYER BARRIER SHEET LINE, MANUFACTURED 1985, INCLUDING THE FOLLOWING: PRIMARY IS AS FOLLOWS: - EXTRUDER A: 2.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-P...

USED BREYER SHEET EXTRUSION LINE LAST USED TO MANUFACTURE LIGHTING PANELS MADE OF ACRYLIC, STYRENE AND POLY CARBONATE. LINE CONSISTS OF: A) (1) USED 3-1/2" 32:1 BRYER EXTRUDER HAVING ELECTRICALLY HE...

USED 4.5" WELEX EXTRUDER, 1982, 30:1 LD RATIO, VENTED, WATER COOLED, POWERED BY A 250 HP DC MOTOR WITH SPECTRUM DRIVE. LUFKIN GEARBOX MODEL D165-611C, 10.03 GEAR RATIO. 5 BARREL ZONES, 1 ZONE FOR SCRE...

USED 6" STERLING SHEET EXTRUSION LINE CONSISTING OF THE FOLLOWING: - 6" STERLING 32/1 L/D NON-VENTED EXTRUDER WITH ELECTRICALLY HEATED WATER COOLED BARREL AND CLOSED LOOP WATER COOLING SYSTEM. EXTRU...

ONE USED 66" FACE NRM-BRIDGE SHEET EXTRUSION LINE CONSISTING OF: 66" FACE NRM-BRIDGE SHEET TAKE-OFF, (5) NOMINAL 8" O.D. COOLING AND POLISHING ROLLS SET UP IN A HORIZONTAL ARRANGEMENT FOR VERTICAL DO...

USED DAVIS STANDARD SHEET TAKE-OFF UNIT HAVING (3) 66" FACE BY NOMINAL 20.8" DIAMETER ROLLS, MOUNTED IN A VERTICAL ARRANGEMENT FOR AN UPSTACK OPERATION. UNIT INCLUDES (7) TOTAL ROLLS. (3) CHROME ROLLS...

USED 70" WIDE APV SHEET EXTRUSION DOWNSTREAM. PACKAGE INCLUDES, 12" X 70" 3-ROLL STACK (3 MATTE FINISH 1 POLISHED CHROME), EACH ROLL WITH INDIVIDUAL ROLL DRIVE UTILIZING 3 HP AC MOTORS WITH SABINA INV...

USED WELEX 77" WIDE SHEET TAKE-OFF UNIT CONSISTING OF THREE (3) 77" FACE CHROME ROLLS MEASURING NOMINAL 18" IN DIAMETER. UNIT IS SET UP FOR DOWNSTACK OPERATION AT APPROXIMATELY A 52-1/2" CENTERLINE H...

USED PTI MODEL 842440 SHEET TAKE-OFF UNIT CONSISTING OF (3) 84" FACE CHROME ROLLS MOUNTED IN A "J" ARRANGEMENT FOR UPSTACK OPERATION. BOTTOM ROLL IS 24" DIAMETER WHILE MIDDLE AND TOP ROLL MEASURE NOM...

USED 94" WIDE DAVIS STANDARD SHEET EXTRUSION LINE, RECONDITIONED 1998 BY DAVIS STANDARD. LINE CONSISTS OF THE FOLLOWING: - 6" 30/1 L/D DAVIS STANDARD NON-VENTED EXTRUDER, ELECTRICALLY HEATED WATER CO...