USED AEROMATIC S7 FLUID BED DRIER,BUILT 1980,SPECIAL SWING OUT PRODUCT BIN,WITH HEATER.

USED AEROMATIC 150 KG FLUID BED DRYER. FAN 1450 RPM. PRESSURE 300 MM WATER GAUGE. TOTAL VOLUME OF BOWL 770 LITERS. 15 KW AIR HEATING UP TO 110 DEG. C. STEAM HEATING POWER 100,000 K KAL HOUR. MA...

USED AEROMATIC MODEL STREA 100, 316 STAINLESS STEEL FLUID BED DRYER. APPROX PRODUCT CAPACITY 2240 LITRE, APPROX BOWL CAPACITY 508 LITRE, HEATING AREA APPROX 0.74 SQ M. UNIT INCLUDES (2) BOWLS MOUNTED ...

USED AEROMATIC MODEL T5 304 STAINLESS STEEL FLUID BED DRYER. UNIT INCLUDES 304 STAINLESS STEEL PRODUCT CONTAINER AND AIR HANDLING SYSTEM. ALSO INCLUDES LASKA STAINLESS STEEL GRANULATOR.

USED AEROMATIC MODEL STREA 0.86.20.SPEZ STAINLESS STEEL FLUID BED DRYER. RATED 2 BAR PRESSURE. 610 LITRE CAPACITY WITH 150-300 KG BATCH WEIGHT DEPENDING ON PRODUCT. INCLUDES SPRAY ASSEMBLY AND BOTTOM ...

USED AEROMATIC TYPE S6 STAINLESS STEEL FLUID BED DRYER (SPRAY AGGLOMERATOR). PRESSURE SHOCK RESISTANCE 2 BAR, REACTING PRESSURE "Ex" FLAP <0.1 BAR, "Ex" FLAP AREA 0.675SQM. AIR PREPARATION HOUSING PRE...

USED ALLGAIER SYSTEM HAAG MODEL WS-R-T-K 1.00/0.90-1.60/0.90-1.00 1.4571 STAINLESS STEEL CONTINUOUS FLUID BED DRYER. FLUID BED APPROXIMATELY 1000MM X 900MM WIDE. DRIVEN BY 380V 50HZ MOTOR

USED CALMIC EURO-VENT MODEL 100 316 STAINLESS STEEL FLUID BED DRYER. INCLUDES (1) APPROXIMATELY 1100MM TOP DIAMETER X 915MM BOTTOM DIAMETER X 450MM DEEP MOBILE DRYING BOWL WITH NOMINAL 100 KG BATCH LO...

USED ESCHER WYSS MODEL FTK270/700 1.4571 STAINLESS STEEL FLUID BED DRYER. FLUID BED IS APPROXIMATELY 1830MM LONG WITH 0.8SQMT DRYING AREA. MESH OPENING SIZE 0.3MM. DRIVEN BY A 1.4KW MOTOR

USED EUROVENT MODEL CPSG-6 STAINLESS STEEL (316) FLUID BED DRYER/GRANULATOR. HAS A CAPACITY OF APPROXIMATELY 6 LITRES. INCLUDES PAN AND SPRAYER. PAN DIMENSIONS 250MM X 150MM. HAS A MAXIMUM CAPACITY OF...

USED GLATT MODEL GPCG-1000 316L POLISHED STAINLESS STEEL FLUID BED DRYER/GRANULATOR/COATER/PELLETIZER. BOWL 5243 LITRE CAPACITY. INCLUDES SPRAY WITH WATSON MARLOW PUMP DRIVEN BY 1.5 KW 230/400 VOLT MO...

USED GLATT MODEL GPCG-15/30 316L POLISHED STAINLESS STEEL GLATT PARTICLE COATER GRANULATOR FLUID BED DRYER. EXPLOSION CLASS EEXEIIT3 RATED 10 BAR SHOCK RESISTANT. HAS DRYING PAN APPROXIMATELY 480MM DI...

USED GLATT MODEL GPCG 3/5 STAINLESS STEEL FLUID BED DRYER. APPROXIMATELY 280 LITRE CAPACITY. RATED -0.1 TO +0.1 BAR OPERATING PRESSURE AT 80 DEG.C. UNIT INCLUDES MOBILE STAINLESS STEEL PRODUCT CONTAIN...

USED GLATT TYPE UNIGLATT LAB/DEVELOPMENT SCALE FLUID BED DRYER. SUITABLE FOR PRODUCT BATCH SIZES OF APPROX 2-6KG. CHAMBER DIAMETER IS APPROXIMATELY 135MM WITH A 75MM DIAMETER SIGHTGLASS. TEMPERATURE G...

USED GLATT MULTICELL TYPE GMC-30 PROCESSING PLANT DESIGNED FOR GRANULATION AND DRYING. SUITED FOR APPLICATIONS IN PHARMA, CHEMICAL AND FOOD INDUSTRIES AND FOR LARGE OR SMALL PRODUCTION BATCH SIZES. TH...

USED GLATT TYPE WST/G 500 STAINLESS STEEL FLUID BED DRYER. APPROXIMATE TOTAL VOLUME 12.5CUMT, APPROXIMATE CONTAINER VOLUME 1560 LITRE. MAXIMUM PRESSURE AT 10 BAR DESIGN. UNIT INCLUDES TOP MOUNTED DUST...

USED GLATT WSG 15 FLUID BED DRYER.STAINLESS STEEL CONTACT PARTS WITH ENAMELED CARBON STEEL FRAME WITH CONTROLS.

USED GLATT MODEL WSG 5 STAINLESS STEEL FLUID BED DRYER. 22 LITRE CAPACITY. STEAM HEATED WITH HEATING CAPACITY 16000 KCAL/HR. FAN DRIVEN BY 1.85 KW, 220/380 VOLT, 3 PHASE, 50 HZ, 2840 RPM MOTOR AT 3000...

USED GLATT MODEL WSG 5 STAINLESS STEEL FLUID BED DRYER GRANULATOR. 20 LITRE CAPACITY. INCLUDES SPRAYER AND 380MM X 250MM PAN. FAN DRIVEN BY 1.85 KW 220/380 VOLT (EX) MOTOR.

USED STAINLESS STEEL GLATT WSG 60 FLUID BED DRYER. INCLUDES (2) PANS MOUNTED ON WHEELS. HAS A CAPACITY OF APPROXIMATELY 220 LITRES, PAN DIMENSIONS APPROXIMATELY 990MM DIAMETER X 400MM. CAN BE HEATED B...

USED GLATT WSG 60 FLUID BED DRYER.STAINLESS STEEL CONTACT PARTS WITH ENAMELLED CARBON STEEL FRAME WITH CONTROLS.12.5 KW MOTOR. 8700 KCAL.

USED GLATT MODEL WST-CD-120/200 316 STAINLESS STEEL FLUID BED DRYER. PAN APPROXIMATELY 1200MM DIAMETER X 550MM STRAIGHT SIDE WITH 500 LITRE OR 120-300 KG BATCH CAPACITY. PAN WITH ROTATING BOWL MESH. C...

USED GLATT MODEL WST 120 STAINLESS STEEL FLUID BED DRYER. HAS MOBILE PRODUCT BOWL APPROXIMATELY 1200MM DIAMETER X 500MM DEEP WITH 420 LITRE CAPACITY. STEAM HEATED WITH 145,000 KCAL/HR HEATING CAPACITY...

USED STAINLESS STEEL GLATT FLUID BED DRYER TYPE WST/WSG 120/200 FOR MIXING, DRYING AND GRANULATION WITH DOUBLE CHAMBER FILTER SYSTEM FOR CONTINUOUS FLUIDIZATION. CAPACITY IS APPROXIMATELY 100-250 KG P...

USED IMA TYPE GHIBLI PAG 700TS STAINLESS STEEL FLUID BED DRYER (SPRAY AGGLOMERATOR). 700 LITRE WORKING CAPACITY PRODUCT CONTAINER. WORKING TEMPERATURE 10-120 DEGC. AIRFLOW 12000 M3/HR. UNIT HAS A TOP ...

USED YENCHEN MODEL YC-FBDG-60 STAINLESS STEEL FLUID BED DRYER. RATED CAPACITY APPROXIMATELY 60-75KG BATCH. UNIT INCLUDES YENCHEN MODEL YC-HP-50 HUMIDITY PROCESSING UNIT AND AIR HANDLING UNIT.

USED 304 STAINLESS STEEL CONTINUOUS FLUID BED DRYER MANUFACTURED BY VIBRA MASCHINENFABRIK OFFENBACH TYPE VF 20/1.5. SURFACE AREA 0.3M2. FLUID BED 1950MM LONG X 150MM WIDE. CONIDUR PLATE. PRODUCT INLE...

USED STAINLESS STEEL (1.4571) CONTINUOUS FLUID BED DRYER MANUFACTURED BY VIBRA MASCHINENFABRIK SCHULTHEIS OFFENBACH TYPE VF 32/3.6 DV. SURFACE AREA 1.15M2. FLUID BED 3200MM LONG X 360MM WIDE. CONIDUR...

USED VIBRA OFFENBACH MODEL WEDAG STAINLESS STEEL FLUID BED DRYER. FLUID BED 400MM WIDE X 4000MM LONG WITH 1.6 SQMT DRYING AREA. HAS APPROXIMATELY 390MM X 200MM OUTLET. DRIVEN BY 5.5 KW 380/660 VOLT 3/...

USED ALLGAIER MODEL WS-V-T-0,45-4,00/1,00 321 STAINLESS STEEL CONTINUOUS FLUID BED DRYER. FLUID BED APPROXIMATELY 450MM WIDE X 4000MM LONG WITH APPROXIMATELY 0.1MM SLOT SIZE AND 1.8 SQMT DRYING AREA. ...

USED ROSIN CONTINUOUS FLUID BED DRYER. STAINLESS STEEL CONSTRUCTION. MEASURES 483 MM (19") WIDE X 1194 MM (47") DRYING LENGTH 1804 MM (71") OVERALL LENGTH. INCLUDES HUNT HEAT EXCHANGERS STEAM HEATER ...

USED NIRO 304 STAINLESS STEEL CONTINUOUS FLUID BED DRYER. HAS 1200MM (47") WIDE X 5000MM (16'5") LONG BED, 6 SQMT (64.5 SQFT) SURFACE AREA. HAS 600MM DIAMETER INLET AND 220MM DIAMETER OUTLET. DRIVEN B...

USED NIRO MODEL FVS-10 SANITARY STAINLESS STEEL CONTINOUS FLUID BED DRYER. APPROXIMATELY 1320MM WIDE X 7580MM LONG WITH 10 SQMT DRYING AREA. REPORTEDLY NEW 2007 AND ONLY USED A FEW MONTHS AND IN VERY ...

USED AEROMATIC FIELDER MODEL MP-MICRO LAB FLUID BED DRYER/GRANULATOR. APPROXIMATE BATCH CAPACITY 20G-200G (.02-.2 KG). AIR FLOW 0-20 CUBIC METER PER HOUR. CONTAINER VOLUME 1300 ML. BENCH TOP DESIGN. S...

USED AEROMATIC MODEL S2 FLUID BED DRYER. HIGHLY POLISHED T316 STAINLESS STEEL PRODUCT CONTACTS, DESIGNED FOR SANITARY APPLICATIONS. 26" DIAMETER DRYING CHAMBER, WITH INTEGRAL BAG TYPE DUST COLLECTOR...

USED AEROMATIC MODEL STR-60 FLUID BED DRYER, WITH (3) TYPE 316 STAINLESS STEEL 535 LITER PORTABLE BOWLS, HEATING CAPACITY 62,000 KCAL/HR (STEAM) WITH 15 HP BLOWER, 3/60/575V.

USED AEROMATIC MODEL STR-60 FLUID BED DRYER. (3) T316 STAINLESS STEEL PORTABLE BOWLS, 535 LITER CAPACITY HEATING CAPACITY 62,000 KCAL/HR (STEAM). 15 HP BLOWER, 3/60/575V.

USED AEROMATIC MODEL T520419 STAINLESS STEEL FLUID BED DRYER. 43" DIAMETER X 5'10" STRAIGHT SIDE. HAS APPROXIMATELY 55" DIAMETER X 22" DEEP BOWL.

USED AEROMATIC MODEL T4, 304 STAINLESS STEEL FLUID BED DRYER. INCLUDES APPROXIMATELY 930mm STAINLESS STEEL PRODUCT BIN AND AIR HANDLING SYSTEM. INCLUDES BLOWER RATED 0,8 m3/S DIRECT DRIVEN BY 110 kW 3...

USED AEROMATIC MODEL T5 2110, 304 STAINLESS STEEL FLUID BED DRYER. INCLUDES APPROXIMATELY 800mm DIAMETER X 500mm DEEP STAINLESS STEEL PRODUCT BIN AND AIR HANDLING SYSTEM. INCLUDES BLOWER RATED 1.2 m3/...

USED AEROMATIC FIELDER MODEL MP-MICRO LAB FLUID BED DRYER/GRANULATOR. BENCH TOP DESIGN. STAINLESS STEEL ENCLOSURE WITH SPRAY GRANULATION AND WURSTER CHAMBER. ELECTRICALLY HEATED. 110 VOLT WITH CONTROL...

USED SPARE BOWL FOR AEROMATIC FLUID BED DRYER. 28" DIA. 9" HIGH STRAIGHT SIDE, 10" HIGH UPPER LIP EXPANDS TO 39" DIA. AT TOP. PERFORATED BOTTOM WITH CHANGABLE SCREEN. STAINLESS STEEL. MOUNTED ON C...

USED SPARE BOWL FOR AEROMATIC FLUID BED DRYER. 28" DIA. 9" HIGH STRAIGHT SIDE, 10" HIGH UPPER LIP EXPANDS TO 39" DIA. AT TOP. PERFORATED BOTTOM WITH CHANGABLE SCREEN. STAINLESS STEEL. MOUNTED ON C...

USED SPARE BOWL FOR AEROMATIC FLUID BED DRYER. 28" DIA. 9" HIGH STRAIGHT SIDE, 10" HIGH UPPER LIP EXPANDS TO 39" DIA. AT TOP. PERFORATED BOTTOM WITH CHANGABLE SCREEN. STAINLESS STEEL. MOUNTED ON C...

USED AEROMATIC MODEL STREA1 FLUID BED DRYER. PLASTIC SHELL. 1 KW BLOWER, 2.2 KW HEATER WITH ALLEN BRADLEY CONTROLS. PROVISION FOR SOFTWALL CONTAINMENT. PRICE INCLUDES 15% BUYERS PREMIUM.

USED AEROMATIC MODEL T93110 FLUID BED DRYER. 300-900 KILO BATCH SIZE, RATED 261,000 KCAL/HOUR. WITH BLOWER, AIR HANDLING UNIT, CHART RECORDER, AND CONTROLS. 78" UPPER DIAMETER X 66" LOWER DIAMETER X 2...

USED BEPEX PROGRESSIVE 5 STAGE BATCH FLUIDIZED BED DRYER. PREVIOUSLY USED ON 1200 - 1400 #/HR OF YEAST FROM 68% MOISTURE DOWN TO 4%. ALL STAINLESS STEEL CONTACTS. 44000 CFM AIR FLOW. WITH WET SCRU...

USED STAINLESS STEEL CONTAC PARTS CALMIC-CISA (ITALIAN MADE) TYPE C12 MK FLUID BED DRYER. BOWL CAPACITY 500 LITRES. UNIT INCLUDES TWO MOBILE BOWLS MOUNTED ON WHEELS. UNIT INCLUDES CONTROL PANEL AND AI...

USED FITZPATRICK FITZ AIR MODEL FA150 FLUID BED DRYER SYSTEM. ALL WETTED PARTS BEING STAINLESS STEEL. EQUIPPED WITH STAINLESS STEEL PAN/BED. TOP MOUNTED EXHAUST FAN WITH MOTOR, EXHAUST FILTER, AIR ...

USED GLATT 125 LITER TOP SPRAY BOWL FOR GPCG-30.

USED GLATT 68 LITER TOP SPRAY PRODUCT BOWL FOR GPCG-30.

USED GLATT 68 LITER/125 LITER TOP SPRAY BOWL EXPANSION CHAMBER FOR GPCG-30.

USED GLATT COLUMN.

USED GLATT GPC800 FLUIDIZED BED COATER. OPERATING PRESSURE 0 BAR. 3600 RPM, 460 VOLT, 60 HZ. EXPLOSIVE PROOF CLASS EXRLE3.2. DESIGNED FOR COATING TIME-RELEASE PARTICULATES.

USED GLATT GPCG-5 FLUID BED DRYER. 7" WURSTER, 2 BAR, 5.5 KW, 3 PHASE, 60 CYCLE, 460 VOLT, 3600 RPM. 16500 KCAL/HOUR, 3 BAR STEAM PRESSURE. 6 BAR COMPRESSED AIR.

GLATT LAB FLUID BED DRYER, MODEL GPCG-5. ALL STAINLESS STEEL UNIT, 3/60/220V ELECTRICS. 1 LITER CAPACITY, BOTTOM SPRAY COATING, TEMPERATURE RANGE 10°F TO 140°C. LAST USED IN FOOD APPLICATION. UNIT IS ...

USED GLATT MODEL GPCG-60 FLUID BED DRYER/GRANULATOR WITH 32" WURSTER. 2 BAR DESIGN. TOP VENTED FOR EXPLOSION. STAINLESS STEEL CONSTRUCTION WITH LATERAL SUPPORTS. VACUUM INFEED TUBE WITH VALVE ON EXPAN...

USED GLATT MODEL GPCG60 STAINLESS STEEL FLUID BED DRYER. SPRAY GRANULATION CHAMBER WITH (2) BOWLS. TOP VENTED. CONTROL PANEL. PRICE INCLUDES 15% BUYERS PREMIUM.

USED GLATT MODEL GPCG1 FLUID BED DRYER. OPERATING PRESS-O-BAR, FAN CAP, 2. KW, RPM 3600N VOLTAGE, COMPRESSED AIR 6-BAR, HEAT CAP, 3.96 BAR.

USED GLATT MODEL GRG-200 FLUID BED PROCESSOR/ROTO GRANULATOR. 304 STAINLESS STEEL SANITARY CONSTRUCTION, LAST IN PHARMACEUTICAL PRODUCTION. PRODUCT CONTACT PARTS ARE MIRROR POLISHED. CONSTRUCTED IN GL...

USED GLATT MODEL GRG-D60 ROTARY GRANULATOR.

GLATT INSERT. 62" DIAMETER X 56" TALL UPPER, 36" DIAMETER LOWER.

USED GLATT LOWER PLENUM FOR GPCG-30.

USED GLATT MODEL UNI-GLATT FLUID BED DRYER. STAINLESS STEEL PROCESS CONTACT PARTS WITH WURSTER INSERT. INCLUDES (1) STAINLESS STEEL SPRAY GRANULATION AND (1) PLASTIC SPRAY GRANULATION CHAMBER. BLOWER ...

USED GLATT MODEL WSG120 STAINLESS STEEL FLUID BED DRYER. UNIT INCLUDES (3) STAINLESS STEEL MOBILE PRODUCT CONTAINERS, (1) FAN RATED 6000CUMT/HOUR. (1) HYDRAULIC POWERPACK. INCLUDES SWITCHGEAR CONTROL ...

USED GLATT RI620 ROTOR PRODUCT BOWL WITH (2) TANGENTIAL SPRAY NOZZLES FOR GPCG-30.

USED GLATT WSG15 STAINLESS STEEL GRANULATING FLUID BED DRYER. 550MM DIAMETER X 1500MM BOWL. WITH CONTROL BOARD. 240/415 VOLT MOTOR. 15 KG CAPACITY.

Used fluid bed dryer by GLATT model WSG-C 60 in stainless steel design. Reported output about 1100 kg of product per shift. Includes two stainless steel pans with volume about 220 l each. Dryer is equ...

USED GLATT MODEL WSG-C120 316 STAINLESS STEEL FLUID BED DRYER. 10'7" HIGH X 6' WIDE X 4'6" DIAMETER. 220-440 LB WORKING CAPACITY. APPROXIMATE SIZE 46.8" DIAMETER X 19.5" STRAIGHT SIDE. 75-90 PSI @ 176...

Used fluid bed dryer by GLATT model WSG-1. Contact parts made of stainless steel. Volume of batch - about 4,5 l and weight about 1 kg. Heating capacity 3800 kcal/h. Fan is driven by electric motor wi...

USED GLATT GRANULATING FLUID BED DRYER, MODEL WSG300, SANITARY STAINLESS STEEL CONSTRUCTION, 360 KG BATCH CAPACITY, PREVIOUS BATCH TIME OF 55 TO 60 MINUTES. TWO (2) PRODUCT DRYING HOPPERS, 3000 RPM F...

USED GLATT MODEL WSG 60 BATCH TYPE FLUID BED DRYER. RATED 220 LITRE, 60 KG BATCH CAPACITY. SANITARY TYPE 304 STAINLESS STEEL CONTACTS. FAN DRIVEN BY 15 KW 220 3 PHASE, 60 CYCLE, 3510 RPM MOTOR. SERIAL...

USED GLATT MODEL WST-120 FLUID BED DRYER.

USED GLATT MODEL WST 100/150 STAINLESS STEEL FLUID BED DRYER. TOTAL VOLUME 3200 LTR. HEATER WITH 211 KW HEATING CAPACITY AT TEMPERATURE -15 TO +90 DEG.C. INCLUDES EXHAUST FAN RATED 6000 M3/HR DRIVEN B...

USED GLATT WST 120 FLUID BED DRYER. STAINLESS STEEL CONSTRUCTION. TOTAL CAPACITY 14.8 CUBIC FOOT, WORKING CAPACITY 12 CUBIC FOOT. WITH 2 SPRAY NOZZLES, CLEAN OUT DOOR, LOADING CHUTE, PNEUMATIC DISCHAR...

USED GLATT 18" WURSTER FOR GPCG-30.

REBUILT JET PRO FLUID BED DRYING SYSTEM. JET-PRO PELLET-PRO TEXTURIZER MODEL 12-14X21 WITH 75 HP MOTOR AND GEARBOX. REMANUFACTURED JET-PROCESSOR 936M3 SERIES CONTINUOUS DRYER WITH (3) SECTIONS DESIGNE...

USED NIRO AEROMATIC MP-1 FLUID BED PROCESSOR. 20.7 LITER PRODUCT CHAMBER. 316 STAINLESS STEEL CONTACT PARTS. MIRROR FINISH. 13.5 KW HOT AIR MAKE UP SYSTEM WITH FILTER. RATED 10 BAR. ALLEN BRADLEY PLC ...

USED NIRO-AEROMATIC MODEL RP-5 316 STAINLESS STEEL FLUID BED ROTO-PROCESSOR. MAIN COMPONENTS INCLUDE FILTER HOUSING 2000 LITRE CAPACITY RATED 2 BAR PRESSURE SHOCK RESISTANCE WITH EX FLAP AREA 0.73 sq....

USED NIRO MODEL MP8 FLUID BED DRYER. SANITARY STAINLESS STEEL CONSTRUCTION. WITH (3) REMOVABLE BOWLS, AIR HANDLING UNIT SYSTEM, 75 HP BLOWER, CARGOCAIRE HONEYCOMB DEHUMIDIFIER SYSTEM, AIR FILTRATION S...

USED NIRO-AEROMATIC MODEL T7 STAINLESS STEEL FLUIDIZED BED DRYER. 600 CUBIC FOOT CAPACITY. RATED UP TO 6000 CFM AIR FLOW. MANUFACTURED IN 1990. INCLUDES BOWL INVERTER, (2) BOWLS, (2) BOWL LIFT SYST...

USED OKAWARA MIXGRAD MGD 20 CONTINUOUS FLUIDIZED BED DRYER WITH SPRAY GRANULATOR. T304 STAINLESS STEEL. 2 SQUARE METER BED AREA WITH ROTARY VALVE DISCHARGE. DUST COLLECTOR, OKAWARA TYPE FBA 10 FLUIDIZ...

USED OKAWRA MIXGRAD MODEL MGD20 CONTINUOUS FLUIDIZED BED SPRAY GRANULATORS. 2 SQUARE METER. TYPE 304 STAINLESS STEEL BED AREA WITH ROTARY VALVE DISCHARGE. INCLUDES FILTER BAG DUST COLLECTOR, OKAWAR...

USED PRO-C-EPT MODEL 4M8 LABORATORY FLUIDBED DRYER/GRANULATOR. UNIT HAS 2 LITRE GLASS CHAMBER. HAS TOP ENTRY DUST FILTER AND SPRAY ATTACHEMENT. INCLUDES AIR FILTER/HEATER. UNIT INCLUDES (1) SPARE 2 LI...

USED VECTOR MODEL FL3-N-5 STAINLESS STEEL FLUID BED DRYER. SPRAY GRANULATION INSERT WITH CONTROLS, 3" WURSTER INSERT, AND 2ND DRYING INSERT. CARTRIDGE FILTER DESIGN. PRICE INCLUDES 15% BUYERS PREMIUM.

UNUSED VECTOR MODEL VFC-15M FLUID BED DRYER GRANULATOR. 316L STAINLESS STEEL PRODUCT CONTACT SURFACES. MULTI-PURPOSE FLO-COATER SYSTEM. 20 LITER AND 60 LITER SPRAY GRANULATION BOWLS WITH EXPANSION CHA...

USED CARRIER STAINLESS STEEL VIBRATING FLUID BED DRYER, APPROXIMATELY 10" WIDE X 90" LONG, SERIAL #24563, MODEL #FTAD1240, EQUIPPED WITH A YOUNG 1/2 HP STAINLESS STEEL ROTARY AIRLOCK DISCHARGE, MOUNTE...

USED 12" X 40" WITTTE STAINLESS STEEL FLUID BED COOLER. HAS TOP AND BOTTOM HOOD FOR AIR SUPPLY AND RETURN BUT NO HEATING OR COOLING APPARATUS.

USED CARRIER MODEL CFBB 1'6" X 3'6" CONVENTIONAL FLUID BED DRYER. 304 STAINLESS STEEL CONSTRUCTION. WITH 18" WIDE X 42" LONG PERFORATED BED. REMOVABLE EXPANDED TOP COVER. GAS FIRED BURNER RATED 2100 S...

USED 20" X 72" WITTE MODEL 412-S PLASTIC PELLET COOLER/CLASSIFIER. WITH 5 HP BLOWER. NO POLYCOOL.

USED WITTE 24" X 6' GAS HOT AIR CONTINUOUS VIBRATING FLUID BED DRYER.

USED WOLVERINE PROCTOR JETZONE FLUIDIZED BED DRYER. BED IS 2' WIDE X 10' LONG AND 8" DEEP WITH A DIVIDER IN THE CENTER. THIS IS A FLUIDIZED BED DRYER THAT HAS TUBES TO BLOW HEATED AIR DOWN ON THE PROD...

Used fluid bed dryer by OKAWARA (Japan) type FBA-20 for continuous work. Contact parts in stainless steel design (AISI 304). Chamber is insulated and covered with carbon steel. Fluid bed has dimension...

USED CARRIER VIBRATING FLUID BED DRYER/COOLER, MODEL FCAD-36605, STAINLESS STEEL CONTACT SURFACES, 36" WIDE X 60" LONG PERFORATED FLUIDIZED ZONE, INTEGRALLY MOUNTED SINGLE DECK CLASSIFYING SECTION, 5 ...

USED WOLVERINE PROCTOR JETZONE FLUIDIZED BED DRYER. BED IS 4' WIDE X 20' LONG. DRYER HAS (2) ZONES. THIS IS A VIBRATING BED DRYER WITH TUBES THAT SUPPLY HEATED AIR DOWN ON THE PRODUCT. ALL CONTACT PAR...

UNUSED 72" X 40' CARRIER THERMAL FLUIDIZED BED. 150 TONS PER HOUR. 30 HP, 230/460 VOLT, 3 PHASE MOTORS, 720 RPM @ 60 DEGREES, 1/4" STROKE. 850°F PROCESS AIR TEMPERATURE. 1,000,000 BTU CAPACITY. HOOD ...

USED ENERDRY STEAM DRYER. USED TO WORK ON BEET PULP WITH APPR. 43 TONS OF WATER EVAPORATION PER HOUR CAPACITY IN PUTTERSHOEK SUGAR FACTORY, HOLLAND. NEW 1994. RENNOVATED AND MODIFIED IN 2003 WITH INS...