USED PALLMANN MODEL PS 8-12 HEAVY DUTY KNIFE MILL. HAS 1200MM WIDE X 800MM FRONT TO BACK FEED THROAT. INCLUDES FEED HOPPER WITH 1300M WIDE X 860MM FRONT TO BACK INLET. 800MM DIAMETER TYPE FW 6 ROTOR W...

USED PALLMANN TYPE PS 8-12 HEAVY DUTY KNIFE MILL. GRINDING CHAMBER 1200MM WIDE X 800MM FRONT TO BACK. HAS 800MM DIAMETER TYPE FW 6 OPEN ROTOR RATED 340 RPM WITH (4) ROTATING KNIVES AND (3) STATOR KNIV...

USED CUMBERLAND MODEL 24B GRANULATOR. SERIAL #58500-89006. HAS 5-KNIFE OPEN ROTOR, 50HP MOTOR, 10HP BLOWER, AND LOW VEYOR BASE WITH BOTTOM DISCHARGE. INCLUDES PELICAN HOPPER AND CYCLONE.

USED NELMOR MODEL G1424M GRANULATOR DRIVEN BY 75 HP 460 VOLT MOTOR. SERIAL NUMBER 69062610. INCLUDES 24" WIDE CUSTOM ADDED POWERED NIP ROLL ASSEMBLY AND FACTORY INSTALLED 6" WIDE NIP ROLL ASSEMBLY. 3 ...

USED CUMBERLAND MODEL 28 GRANULATOR HAVING AN 18" X 28" THROAT OPENING WITH A THREE(3) KNIFE OPEN ROTOR. ROTOR IS BELT DRIVEN BY APPROXIMATLY A 75 HP MOTOR (NO TAG ON MOTOR). PELICAN TYPE FEED HOPPPER...

USED CUMBERLAND MODEL #28 GRANULATOR HAVING A 5 KNIFE OPEN ROTOR. ROTOR IS PRESENTLY BELT DRIVEN BY A 20 HP MOTOR. DISCHARGE IS AN AIR VEYOR TYPE WITH 5 HP BLOWER. SERIAL NUMBER 49410-7015. ORIGINALL...

USED NELMOR MODEL G2436M1 GRANULATOR HAVING A 24" X 36" FEED THROAT AND A (3) KNIFE SOLID ROTOR WITH (2) BED KNIVES. POWERED BY A 75 HP SOLID ROTOR. SCREEN SIZE 3/8", SET UP FOR AIR VEYOR DISCHARGE.

USED MITTS & MERRILL MODEL NC13CD LH HOG GRINDER WITH 13" X 16" THROAT OPENING. DIRECT CONNECTED TO 100 HP 460 VOLT MOTOR. HAS SOLID ROTOR WITH MULTIPLE 5" WIDE KNIVES, WATER COOLED BED KNIFE, APPRO...

USED #24 CUMBERLAND GRANULATOR BELT DRIVEN TO 100 HP MOTOR. INCLUDES MOTOR STARTER, 3 KNIFE HIGH SHEAR,OPEN ROTOR, AND BLOWER FOR DISCHARGE. NO CYCLONE INCLUDED. GRANULATOR NEW 1990, SERIAL # 58500-9...

ONE USED FOREMOST MODEL S45 GRANULATOR HAVING A 16" X 45" THROAT OPENING WITH A THREE KNIFE CLOSED ROTOR. ROTOR IS BELT DRIVEN BY DUAL 50 HP MOTORS, 230/460 VOLT. TWO BED KNIVES. 20 HP BLOWER DISCHARG...

USED FOREMOST MODEL S45 GRANULATOR HAVING A 16" X 45" THROAT OPENING WITH A THREE KNIFE CLOSED ROTOR. ROTOR IS BELT DRIVEN BY DUAL 50 HP MOTORS. TWO BED KNIVES. SET UP FOR BLOWER DISCHARGE, BLOWER NOT...

USED CUMBERLAND #28 GRANULATOR. HAS 18" X 28" OPENING, DIRECT CONNECTED TO 50 HP MOTOR. INCLUDES 3 KNIFE OPEN ROTOR WITH 2 BED KNIVES, STANDARD TRAY FEED HOPPER, BLOWER DISCHARGE BUT NO BLOWER. PREVIO...

USED HERBOLD MODEL SMS45-60 H5-3 GRANULATOR. CUTTING CHAMBER ONLY. 3 KNIFE OPEN ROTOR. WITH DRIVE SHIFT/FLY WHEEL. MANUFACTURED 1990. SERIAL #20823.

USED CUMBERLAND #28, 18" X 28", 125 HP GRANULATOR. HAS 3 KNIFE SOLID ROTOR, MOUNTED ON GAYLORD HIGH BASE. NEW 1969. DRIVEN BY 125 HP MOTOR.

USED CUMBERLAND MODEL 28 GRANULATOR, 18" X 28" FEED OPENING. HAS 3-KNIFE SOLID ROTOR, 3/8" SCREEN, GAYLORD DISCHARGE. INCLUDES 125 HP BELT DRIVE MOTOR AND MOTOR STARTER.

USED NELMOR MODEL G3036M2 GRANULATOR WITH A 10 KNIFE STAGGERED HOG ROTOR. 2 BED KNIVES, 30" X 36" FEED THROAT. FORKLIFT BASE, SIDE FEED HOPPER. HAS HYDRAULIC ASSISTED CRADLE. WITH DUAL 125 HP 460 VOL...

USED CUMBERLAND MODEL 50 GRANULATOR WITH 6" X 50" THROAT OPENING. ROTOR AND INTERIOR OF CHAMBER ARE CONSTRUCTED OF STAINLESS STEEL. UNIT HAS A THREE KNIFE HIGH SHEAR OPEN ROTOR. ROTOR IS BELT DRIVEN B...

USED 20" X 56" CUMBERLAND GRINDER, NEW 1999. MODEL C1400,SERIAL # 53320-9901. GRINDER IS EQUIPPED WITH A HIGH SHEAR, CHEVRON DESIGN, 3 KNIFE OPEN ROTOR WITH 18" CUTTING CIRCLE AND 160MM OD BEARINGS...

USED ALPINE ROTOPLEX MODEL RO80/100 CUTTING MILL. HAS 30" X 40" FEED THROAT, 7-KNIFE CROSS CUT OPEN ROTOR WITH ROTATING END DISKS, (6) STATIONARY KNIVES, 150 HP 460 VOLT, 1180 RPM MOTOR, 345 RPM MAXIM...

USED 24" X 36" NELMOR 7-KNIFE FILM GRANULATOR, NEW 1987. HAS (2) 100 HP INDIVIDUAL MOTORS. BELT DRIVEN TO OPPOSITE ENDS OF ROTOR. HAS 7-KNIFE ROTOR AND WATER-COOLED, CHAMBER WITH HARDENED SURFACE, FE...

USED 350 HP MONTGOMERY HOG GRINDER, MODEL #51CS-CK. HAS APPROXIMATELY 30" X 51" THROAT OPENING, 350 HP DIRECT CONNECTED MOTOR, 460 VOLT, AND HAS SOLID ROTOR WITH 9 LARGE ANVIL POINTS AND 8 SMALL AMVIL...

USED 400 HP 32"X50" CUMBERLAND MODEL 3250 GRANULATOR. UNIT PRESENTLY DISASSEMBLED. UNIT HAS A 9-KNIFE STAGGERED OPEN ROTOR. UNIT TO BE ASSEMBLED, CLEANED AND PAINTED.

TEST RUN OF THE FOLLOWING: USED MITTS & MERRILL MODEL 13CSD HOG STYLE GRINDER.