USED ALFA LAVAL SFDX 209S - 343914 NOZZLE DISCHARGE CENTRIFUGE. STAINLESS STEEL CONTACT PARTS. OPEN DISCHARGE. 60HZ ELECTRICS 25HP

RECONDITIONED ALFA LAVAL MODEL SVSX 210B-74 STAINLESS STEEL NOZZLE CENTRIFUGE. HAS BOWL WITH PERIPHERAL NOZZLES. OPEN INLET AND OPEN OUTLETS. CONCENTRATOR DESIGN WITH DIRECT DRIVE. RECENTLY RECONDITIO...

USED ALFA LAVAL MODEL SX 412 STAINLESS STEEL NOZZLE CENTRIFUGE. DIRECT DRIVEN BY FLANGE MOUNTED 50 HERTZ MOTOR AT APPROXIMATELY MAXIMUM 4500 RPM. INCLUDES CONTROLS, PUMPS AND SILL UNIT. REPORTEDLY VER...

RECONDITIONED ALFA LAVAL MODEL TX 212 STAINLESS STEEL NOZZLE CENTRIFUGE. DRIVEN BY 55 KW MOTOR AND INCLUDES 0.25 KW EXTERNAL OIL PUMP. HAS PERIPHERAL NOZZLES WITH WASH WATER FEED. INCLUDES SET OF TOOL...

USED MERCO MODEL B30SPS PRIMARY SEPARATOR. FEED RATE APPROXIMATELY 200 TO 275 GALLONS PER MINUTE. UNIT DRIVEN BY 125HP, 3300RPM MOTOR.

USED WESTFALIA SEPARATOR DA200-76-573 DISC BOWL CLARIFIER CENTRIFUGE WITH NOZZLE DISCHARGE OF SOLID PHASE AND PUMPED DISCHARGE OF LIQUID PHASE. CONCENTRATE WASHING FACILITY. PRESSURE TIGHT DESIGN. SAN...

USED STAINLESS STEEL WESTFALIA CENTRIFUGE TYPE VA 35-09-566. S/N 1685880.

USED ALFA LAVAL FESX 412B-35-60 NOZZLE CENTRIFUGE. MAX BOWL SPEED 4800 RPM, 35 HP MOTOR. BUILT 1985.

USED ALFA LAVAL DISC NOZZLE SEPARATOR CENTRIFUGE, MODEL FESX 512B-45CG-50. BOWL SPEED 4800 RPM. NUMBER OF TANGENTIAL NOZZLE:90, MAX. HYDRAULIC CAPACITY IS 90 M3/H,

RECONDITIONED ALFA LAVAL FEUX 512-31C-60 T-316 STAINLESS STEEL NOZZLE CENTRIFUGE. 100 HP. 3 PHASE, 60 CYCLE, 230-460 VOLT, 1750/OPEN MOTOR. INTERNAL NOZZLES WITH A PARING DEVICE TO REMOVE SOLIDS.

USED ALFA LAVAL MODEL FEUX-512U-31C-50 STAINLESS STEEL DISC CENTRIFUGE. CAPACITY 12-70 CUBIC METERS PER HOUR. 5295 MAX. RPM. 55 KW MOTOR. BELT DRIVE. BOWL HAS 12 REMOVABLE NOZZLES. PREVIOUSLY USED ON...

USED DORR OLIVER B-16 MERCO CENTRIFUGE.

USED DORR OLIVER B-16 MERCO CENTRIFUGE.

USED DORR OLIVER B-16 MERCO CENTRIFUGE.

USED DORR OLIVER B-16 MERCO CENTRIFUGE S.S. BOWL - BRONZE HOUSING. 5400 RPM MAX. SPEED. 40 HP MOTOR.

USED DORR OLIVER BX-16 MERCO CENTRIFUGE. STAINLESS STEEL BOWL, BRONZE HOUSING. 5400 RPM MAXIMUM BOWL SPEED. 50 HP, 3/60/220-440 VOLT MOTOR. LIFTING CYLINDER WITH AIR RECEIVING TANK.

USED DORR OLIVER C-9 PILOT PLANT NOZZLE CENTRIFUGE. 304 STAINLESS STEEL. 8210 RPM MAX BOWL SPEED AT 1.0 FEED DENSITY. DRIVEN BY 15 HP 3/60/230-460 VOLT, 3510 RPM MOTOR, UL LABEL. OIL LUBRICATED. M...

MODEL PC-30 CENTRIFUGE, BASE, MOTOR AND BOWL. PRESSURE TIGHT HOUSING. WITH SPARE BOWL.

USED DORR OLIVER PCH-30 NOZZLE CENTRIFUGE. T316 STAINLESS STEEL CASING. 317L SS BOWL. MAXIMUM WORKING PRESSURE 341 PSI AT 430°F. NATIONAL BOARD #0418 DRIVEN BY 150 HP 3 PHASE, 60 CYCLE, 380 VOLT, 178...

USED DORR OLIVER PCH-30 NOZZLE CENTRIFUGE. T316 STAINLESS STEEL CASING. 317L SS BOWL. MAXIMUM WORKING PRESSURE 341 PSI AT 430°F. NATIONAL BOARD #0417 DRIVEN BY 150 HP. 3 PHASE, 60 CYCLE. 380 VOLT-178...

USED DORR OLIVER PCH 30 NOZZLE BOWL CENTRIFUGE.

USED MERCO MODEL B16 CENTRIFUGE. WITH BRASS BOWL. BOWL RPM 4850. NO MOTOR.

USED MERCO B30 CENTRIFUGE. 3000 RPM

USED SHARPLES DH-2 NOZZLEJECTOR. CONTINUOUS NOZZLE DISCHARGE. 12 NOZZLES. SEPARATOR AVAILABLE. 20 HP MOTOR. 3/60/440. ALL STAINLESS STEEL. 91 DISCS - PURIFIER DESIGN.

USED SHARPLES DH3 NOZZLEJECTOR. CONTINUOUS DISCHARGE OF SOLIDS. DRIVE MOTOR IS 3 PHASE, 60 CYCLE, 220 VOLT. 25-40HP. 316 STAINLESS STEEL WETTED PARTS.

USED SHARPLES DH3 NOZZLEJECTOR. CONTINUOUS DISCHARGE OF SOLIDS. DRIVE MOTOR IS 3 PHASE, 60 CYCLE, 220 VOLT. 25-40HP. 316 STAINLESS STEEL WETTED PARTS.

USED SHARPLES DH3 NOZZLEJECTOR. CONTINUOUS DISCHARGE OF SOLIDS. DRIVE MOTOR IS 3 PHASE, 60 CYCLE, 220 VOLT. 25-40HP. 316 STAINLESS STEEL WETTED PARTS.

USED WESTFALIA HFG 12036 YEAST SEPARATOR GOOD FOR UP TO 330 GPM. 40 HP MOTOR. LIQUID DISCHARGE BY GRAVITY.

USED WESTFALIA (CENTRICO) TYPE 316 S/S NOZZLE CONCENTRATOR, MODEL SKIG-10006. WITH SLUDGE CHUTE, DISCS WITH OUTER RISING CHANNELS, 3 SETS OF NOZZLES WITH TUNGSTEN CARBIDE NOZZLE INSERTS, FLOW METER, ...